Question about 1987 Ford Bronco

1 Answer

Diagrams of serpentine belt 87 ford bronco - 1987 Ford Bronco

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 1,757 Answers

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1987/make/ford/model/bronco/1987_ford_bronco_drive_belt_routing_diagram.htm

Posted on Mar 06, 2010

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1757 Answers

SOURCE: HOW TO INSTALL SERPENTINE BELT ON 87 FORD VAN

For the 1987 Ford Econoline Van:
Size Engine??
Engine Options (AC/No AC)??

Click on the following direct, Free Link. It has the Serpentine Belt Diagram for your 1987 Ford Econoline Van depending on your size Engine and Engine Options.

Let me know if this helped....

http://www.2carpros.com/car_repair_information/year/1987/make/ford/model/econoline/1987_ford_econoline_drive_belt_routing_diagram.htm

Posted on Apr 15, 2010

  • 1757 Answers

SOURCE: serpentine belt broke on 87 ford econo van

ps...you do not have to Post another Question....just Add a Comment to this question.

"HOW TO": I professionally prefer the Serpentine Tensioner Tool.
Standard Rules to Removal the Serpentine Belt with an Automatic Tensioner:
1. Find the Tensioner(s).
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (located on the Tensioner Pulley rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with an Automatic Tensioner:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley and Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.

Posted on Apr 16, 2010

Testimonial: "The help was vrey helpful i could complete the job"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Serpentine belt diagram 2002 Ford escort zx2


The picture is for a zetec. Let me know if wrong diagram?
26017169-0d1su300qx55v1h5u01lpo5r-3-0.jpg

Dec 21, 2015 | Ford Cars & Trucks

1 Answer

87 bronco timing belt diagram


a 1987 Bronco does not have a timing belt. It uses a timing chain and gears on the crankshaft and camshaft. NO adjustment can be made or is needed. The chain will stretch over time and then replacement is the only fix.

Dec 31, 2010 | Ford Bronco Cars & Trucks

1 Answer

Replacing a serpentine belt 1989 ford bronco


most have a diagram in the engine compartment on the front by the latch. if not draw a diagram of how it is routed. Removal is done by releasing the tensioner on the passenger side next to the alternator. route new one leaving going under the tensioner the last part, then lift tensioner and route under it.

May 29, 2010 | 1989 Ford Bronco

1 Answer

HOW TO INSTALL SERPENTINE BELT ON 87 FORD VAN


For the 1987 Ford Econoline Van:
Size Engine??
Engine Options (AC/No AC)??

Click on the following direct, Free Link. It has the Serpentine Belt Diagram for your 1987 Ford Econoline Van depending on your size Engine and Engine Options.

Let me know if this helped....

http://www.2carpros.com/car_repair_information/year/1987/make/ford/model/econoline/1987_ford_econoline_drive_belt_routing_diagram.htm

Apr 14, 2010 | 1987 Ford Econoline

1 Answer

Need diagram for '87 ford pu seraphine belt


For the 1987 Ford F150:

I do not know if you have the 4.9L In-Line 6-Cylinders, 5.0L V8, or the 5.8L V8 Engine or what Engine Options ( AC/No AC, etc.).

Click on the following free direct Link. It has several Serpentine Belt Diagrams for the 1987 Ford Pickups.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/1987/make/ford/model/pickup/1987_ford_pickup_drive_belt_routing_diagram.htm

Apr 09, 2010 | 1987 Ford F 150

1 Answer

I need a serpentine belt diargram for a 1987 ford f-150


There are 5 different engines available for the '87 F-150.
Go to this site and choose the Ford F150 and appropriate engine.
When the results come up, scroll down and you will see an icon for a camera next to serpentine which will show you the diagram...

http://www.gates.com/part_locator/index.cfm?location_id=3598

Dec 27, 2009 | 1987 Ford F 150

1 Answer

Diagram of serpentine belt


CLICK HERE with A/C
CLICK HERE w/o A/C


Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Apr 17, 2009 | Ford F-250 Cars & Trucks

1 Answer

I need a diagram for a serpentine belt for 1990 full size Bronco


I see you posted this in April, hopefully you have found a diagram by now. Anyways if you ever have problems like that again you can go to www.autozone.com and enter your vehicle information.

Apr 06, 2009 | 1990 Ford Bronco

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

478 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...