Question about 2002 Pontiac Grand Prix

1 Answer

Head lights will not stay on an there are no fuses blown

Posted by on

  • yunikchae May 11, 2010

    sounds like u have a loose electrical connection, but u probably already knew that. check and see if the light bulb somehow got loose. u may also have a problem in the steering column, with the actual circuit closing. how long do the lights stay on? do the lights turn on with a button, or on a switch on the steering column?



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 286 Answers

The headlights are 5 seperate circuits, Lh, Rh dip and head , plus main beam flash . So it's unlikely a fuse problem , you should check the connector plug at light switch(wiggle test) and possible H/light relay (if fitted) . Any bad connection at the Ign sw or steering column will also give this type of symptom. Good luck

Posted on Apr 15, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Is the lights and the speedometer on the same circuit?

speedo is worked by the vehicle speed sensor (VSS) the rest are through the light switch
it may be a faulty light control module or a blown fuse

Oct 08, 2015 | Cars & Trucks

1 Answer

How do I find Head lights fuse in fuse box

Hi,I hope this helps you.
If you get one of these test lamps(screwdriver that has a light in it, and a wire that has a crockerdile clip on the end,
so put the crockerdile clip on earth,(car body will do) now on the side of the fuse wich would be dead if the fuse has gone,
in order just tuch that side of the fuse,if the fuse is ok the light on the screwdriver will lihgt up,so if you go through all the fuses in this way when you come to the fuse thats falty the light will stay off ,that should be the one for your lights,as long as there is not another fuse for something else thats blown,well all the best.

Apr 19, 2015 | Cars & Trucks

1 Answer

Blew 20 amp fuse for tail lights and dash under hood while towing trailer replaced but still not working and head lights stay on

sounds likely to be a relay blown so is giving constant supply to headlights and affecting rest of lighting system not sure of location on this vehicle but a google search will tell you if you dont have workshop manual

Mar 25, 2014 | 2005 Ford F-150 SuperCab

1 Answer

My 2000 Toyota Corolla headlights will not turn on during the night, and stay on during the day

Your Corolla has daytime running lights (DRLs). A photocell determines whether it is day or night. Your DRLs turn on automatically in daytime without you operating the light control ("headlight") switch. Your DRLs are actually your headlights on low beam. At night, the photocell senses it is dark and disables the DRLs. When you set the light control ("headlight") switch to HEAD, the head relay closes and the headlights should turn on. Since they don't, I suggest opening the engine room junction block and checking the 40A MAIN fuse and the 10A LEFT HEAD (UPPER) and RIGHT HEAD (UPPER) fuses. In engine room relay block 5, check the 10A LH-LWR HEAD and RH-LWR HEAD fuses. Replace any blown fuses and the headlights should be working normally again

Sep 29, 2012 | 2000 Toyota Corolla

1 Answer

High beam lights flash, but won't stay on.Perhaps a blown fuse?

check the looseness between bulb and connector. blown fuse, lights are totally out.

Aug 17, 2012 | Cadillac Brougham Cars & Trucks

1 Answer

Tail lights stay on also head lights also no dash lights have replaced the headlight switch and the ignition switch now is it the bcm or something else?

not trying to cast any problems but normally you can agust the brightness of the dash light..try turning it up..other than that...there is a fuse box under or in the dash board...make shore the fuse isnt blown.

Jul 20, 2010 | 1999 Plymouth Voyager

2 Answers

Dash lights not working

it can't be a fuse problem because the lights would not turn on at all if the fuse was blown.check the dimmer switch,i believe the problem has to be there.hope this info helps.take care and good luck, manny

Feb 19, 2010 | 2005 Toyota Corolla

3 Answers

A code read at the odometer NO BUS - My oil light and engine light came on. My gas, speed and RPM hands do not work. My air bag light stays on as well. i do have head lights but the light will not come on...

Locate the fuse in the fuse box the =Bus fuse may be blown, if the fuse is not blown then the voltage regulator on the back of the instrument panel has gone bad and you will have to pull the cluster out to fix it.

Jan 27, 2010 | 2004 Jeep Liberty

1 Answer

Head,tail lights,and fan stay on with key off

check fuse #16 in fuse box, if it is blown, make sure the wiring behind the fuse box isn't melted. hope this helps. p.s. it's the inside fuse box not the underhood

Sep 03, 2009 | 2000 Ford Windstar

Not finding what you are looking for?
2002 Pontiac Grand Prix Logo

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides