Question about 1998 Dodge Ram 2500 2WD

1 Answer

Blower motor will not work. Done checked all fuse boxes I can find also replaced blower motor and relay box that is between blower motor and switch. Are there any other areas I might be overlooking

Posted by on

  • austinjsh Nov 16, 2009

    Done replaced the resistor and blower motor. Getting current to the resistor but still nothing to the blower motor.

  • Patrick Rayome May 11, 2010

    Blower Motor Resistor $65-$69 (plus tax) Below is the diagram for the location.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 1,757 Answers

Blower Motor Resistor $60-$70. Located on Venting Case to the left of the Blower Motor.

Posted on Nov 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blower inop 1999 ford ranger


In the I/P fuse panel, check 7.5A FUSE 2
In the engine compartment fuse/relay box, check the 40A BLOWER MOTOR FUSE and blower motor relay
Also check the blower switch, the blower motor resistor, and the blower motor.

Mar 04, 2017 | Ford Ranger Cars & Trucks

1 Answer

Blower not working


Check fuse #14 (10A) in the under dash fuse box (drivers' side).

Check the blower motor relay in the underhood fuse box. to check it, simply switch it with another identical relay. If the blower now works the relay is bad.

Apr 16, 2014 | 2004 Honda Element

2 Answers

Heater fan not working


Smack it and see if it comes on. If it does then the motor brushes are bad. If it does not come on, check the fuses. If the fuses are ok, check the voltage on the plug to the motor.

Feb 06, 2014 | 2001 Dodge Durango

1 Answer

Heater blower does not work


Four possibilities. One is the blower motor fuse in the fuse box to the left of the steering column. One is the fan switch on the dash, One is the ballast resistor under the dash below the glove box. Third is the blower motor itself. The first three take a few minutes to check out. Replacing the blower motor requires an hour and a half if it's done by someone who's done it before. I've replaced a dozen of these.
Good luck

Jan 23, 2013 | 1993 Volkswagen Eurovan

1 Answer

My fan motor and windows and radio loose power, like its a loose wire or a short to the framae from the primary fuse box to the secondary one, how can i find the problem and fix it


COULD HAVE CORROSION INSIDE FUSE AND RELAY BOX CAUSING POOR CONTACT IN ELECTRICAL CIRCUITS. REMOVE FUSE AND RELAYS TO CONTROL CIRCUITS SPRAY A LITTLE ELECTRONIC CLEANER ALLOW IT TO DRY.CHECK BLOWER MOTOR RELAY IT COULD BE BAD OR BLOWER MOTOR RESISTOR BAD HOT BLOWER MOTOR TO SEE IF BLOWER WORK IF NO YOU HAVE FAULTY BLOWER MOTOR. IF BLOWER MOTOR WORKS WHEN YOU HOT WIRE BLOWER MOTOR CONTROL SWITCH COULD BE BAD.RADIO AND POWER PROBLEM COULD BE IN THE FRONT CONTROL MODULE IF CLEANING OUT CONTACT WITH ELECTRONIC CLEANER.DEALERSHIP HAS TO CHECK IT OUT.

Sep 19, 2011 | 2002 Chrysler Town & Country

1 Answer

99 olds heater heats,but doesnt come on


CHECK HEATER AND AC IGNITION 10 AMP FUSE UNDER HOOD JUNCTION BOX.IF ALL IS GOOD CHECK BLOWER MOTOR FUSE AND RELAY.IF ALL LOOKS GOOD. TURN ON CONTROL SWITCH TO CHECK TO SEE IF POWER GOING TO BLOWER MOTOR IF YES BLOWER MOTOR BAD.IF NO POWER GOING TO BLOWER MOTOR FUSE AND RELAY GOOD.YOU HAVE BROKE WIRE BETWEEN SWITCH AND BLOWER MOTOR OR CONTROL SWITCH FAULTY. TO GET TO BLOWER MOTOR ITS LOCATED UNDER THE DASH ON PASSENGER BEHIND GLOVE COMPARTMONT YOU DONT HAVE TO REMOVE GLOVE BOX ITS JUST BELOW IT FAR BACK.YOU NEED TURN OFF RADIO FIRST THEN DISCONNECT NEGATIVE BATTERY CABLE WAIT 20 MINUTES THIS DISABLE AIRBAGS AND THE BCM.REMOVE BLOWER MOTOR HOTWIRE IT TO SEE IF ITS WORKS. IF NO BLOWER MOTOR NO GOOD.IF BLOWER MOTOR GOOD THE AC AND HTR CONTROL SWITCH IS BAD DEALERSHIP FIX.

Dec 30, 2010 | 1999 Oldsmobile Alero

1 Answer

Front blower motor will not blow out heat or nothing, if i replaced the relay in the fuse box in side suv could that work. relay for blower motor, also not sure which one is the relay in the fuse box.


This may be a faulty Blower motor resistor, usually mounted inside the blower motor air box, or defective blower motor. There is no single Relay for the blower motor.

Dec 11, 2010 | 2004 Mitsubishi Endeavor

2 Answers

Blower doesnt work on all speeds


Step 1: Check fuse
Step 2: Change relay (usually can swap with another relay in the fuse box and try it)
Step 3: Check connection on switch
Step 4: Replace Switch
Step 5: Check connection on blower motor
Step 6: Replace blower motor

Chevrolet has a bad reputation for the connection and/or switch malfunction for the blower motor. I changed all 6 items in my truck in a 3 month span as all 6 appeared one right after the other.
Good luck.

Nov 11, 2010 | 2006 Chevrolet Cobalt

10 Answers

1997 Isuzu Rodeo V6 4X4. I have only owned this vehicle for 3wks and the fan/ac wont blow at all out the vents. The blue light comes on when i push the ac button but that is all it does. I don't know which...


C-19 Blower motor fuse 25A located in cabin fuse box. Left hand footwell on LHD vehicles, right hand dashboard on RHD vehicles.
Start by checking blower relay B-36 in the engine compartment fuse and relay box. Remove the relay. Jumper directly from battery to pins 85 and 86. (also see here: http://www.fixya.com/cars/r5544622-wire_relay if you dont know about relays) The relay should click Now measure across pins 30 and 87. Measurement should be 0 ohm.
Remove the blower motor(3 screws on the bottom of the unit under the passenger side dash) and connect jumper leads from the battery directly to the blower motor to see that it operates.
The blower motor resister is mounted on the ducting between the motor housing and the heating unit. Remove to test
Measure :
  • pin 1-2 : 2.4 ohm
  • pin 2-4 : 0.9 ohm
  • pin 2-6 : 0.28 ohm
  • pin 2-3 : 0 ohm

Aug 21, 2010 | 1997 Isuzu Rodeo

1 Answer

Have lost fan to heatr and ac...where is the fuse box or diagram?


1. Does the Blower work on High (or #4) only? If so then it is not the Front Blower Motor or the Relay that is bad, but it is the Resistor which is located behind the Glove box. Follow step #a. below and take out the Glove Box to access. It has 3 to 4 wires going into it. The wiring path is: Switches to the Resistor and then to the Motor.
2. The Front Blower Motor Relay is located in the IPM - Fuse and Relay Center. It is located in a box within the engine compartment. However: (restated) IF the Blower does only work on High then this Relay is good and you should only replace the Resistor Only. The Identification and Location of the Relays and Fuses is located on the back side (inside) of the IPM cover. Remove the cover. The Front Blower Motor Relay is the same Type (size and shape) as several other Relays in the panel. Switch out the Front Blower Motor Relay with a non-engine operation Relay for a function that you know works. Recheck the operations of both functions. If the Front Blower Relay now works and the other function now does not work, it was the Relay was bad and needs to be replaced.
a. Disconnect the Negative Cable from the Battery and wait at least two (2) minutes to deactivate the Airbag Sensors.
b. Remove the Glove Box.
c. Disconnect the Electrical Connection.
d. Unbolt/Unscrew the bolts/metal screws and remove the Resistor.
Installation is reverse of above.
Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!

Jan 19, 2010 | 2004 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

311 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...