Question about 1991 Chevrolet Camaro

1 Answer

Hi my 91 camaro z-28 has a code 32 stored and it is smelling and useing alot of gas..and misfires slightly only 200 miles to a fill up PLEASE HELP

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,608 Answers

Code 32 is the egr valve.Remove it and see if it has carbon holding it open.Even if it is a little open it will cause the smell and run bad.

Posted on Nov 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

91 camaro miss fires nd stalls


have the fault codes read . Maf /map sensors.

Apr 20, 2013 | Cars & Trucks

1 Answer

Misfiring, shaking when in gear, lack of power while accelerating on my 1997 Camaro V6 3800 series. I've replaced alot of stuff already but still can't figure out the problem. Any help would b


tell me what you done is check engine light on go to auto zone they will put a code reader on it for free tell me what codes come of it dont let them sell you anything ok get back to me i can help you im a mechanic

Nov 17, 2012 | 1997 Chevrolet Camaro

2 Answers

98 camaro manual tran..sputters and has acceleration prob.chek enjine flashing,,exhaust rumble and sputters back fires occasionally at start of engine slowly accelerates


Hi:
Not sure of all what is wrong, but one thing I can suggest is to have your computer codes downloaded to see what it is showing as a fault code. Only a few codes can cause the check engine light to flash, and the most common is a cylinder misfire. Your car most likely has an ignition module or coil pack failing, and that problem is causing most of your symptoms. You can usually get your local autoparts store, such as Autozone, to scan your car for free, and tell you what is tripping the check engine light, and then you can go from there!

Apr 28, 2010 | 1998 Chevrolet Camaro

1 Answer

I have a 1996 camaro, 3.8. Have really been having alot of problems, idle seems low, i get a code P300 ( random misfire) and a Cam shaft sensor code, I replaced the cam sensor 2 times, changed the plugs...


you can disconnect the battery for about 2 min and that should clear any codes that are stored in in it or take it to autozone or someplace that will erase the codes for you i hope this helps

Apr 11, 2010 | 1996 Chevrolet Camaro

1 Answer

Getting way less milage after fuel was replaced : HELP


First off,If the mechanic didn't have the pump in his hand when you met,Have the car towed to his shop right then and go into work early,He didn't put a new one in and have your car back in 2 hours (since the pump is located inside the fuel tank and the tank must be removed to get to it and)

Not saying it can't be done in 2 hours,if all the tools,parts,and ducks are in a row waiting for you.

Secondly,Additives are great until you over use them,mix and match them,Etc.....

To the search questions
#1 The filter should have been changed with the pump or at least at the same time.
#2 The fuel pressure should have been tested by the mechanic after installing the new pump.
#3 If you have a vacuum leak,the car will run rough or at a higher or lower idle.

Try a good tune up.The additives have probably fowled the plugs and may even destroyed the injector seals inside.

Jun 01, 2009 | 2005 Pontiac Sunfire

1 Answer

Fuel smell in camaro


50 miles reduction in the conditions mentioned means that your economy is about right
there is a small hose back from the tank to under the cap to release air trapped when filling
koses can get loose , crack or break
tank sender units gaskets can break down
look around the tank area for the leak /smell
a damp patch in the dust is a good give away

Apr 28, 2017 | 1997 Chevrolet Camaro

1 Answer

2000 SS camaro lacking power producing overwhelming exhaust


did you put the platinum plugs back in.get a noid light test the injector wires make sure they are working . when you hook noid light up these should have a steady blink .if light dont blink just light up.you got pcm problems .if you get no lights you have open wire.besure to check ignition coils that control those misfiring cylinders.

Feb 23, 2009 | 2000 Chevrolet Camaro

1 Answer

2000 Lincoln LS has P0305 and p0306, misfire on #5 and #6


Go to your auto parts store and get a couple bottles of heet and put in the gas

Dec 20, 2008 | 2001 Lincoln LS

2 Answers

The choke light comes on ,on my 1986 camaro z-28


is it on all the time or just when cold?

Nov 20, 2008 | 1986 Chevrolet Camaro

Not finding what you are looking for?
1991 Chevrolet Camaro Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...