Question about 2003 Ford Windstar

1 Answer

There have been two occasions when I've had to use my parking brake.After releasing the brake, my regular brakes dont work.My husband has always changed the front brakes and we've never changed the back brakes since we've owned the 2003 ford windstar van.Can someone help?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

The rear brakes need to be changed, the parking brakes are always the rears.

Posted on Nov 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Help my friends handbrake on her automatic vauxhall Mokka is stuck on how can it be released?


Parking brake Always apply parking brake firmly without operating the release button, and apply as firmly as possible on a downhill or uphill slope. To release the parking brake, pull the lever up slightly, press the release button and fully lower the lever. To reduce the operating forces of the parking brake, depress the foot brake at the same time. Control indicator R 3 85.

Feb 16, 2015 | Vauxhall Cars & Trucks

1 Answer

Can't get transmission out of "park"


have someone sit in car with engine started and press brake pedal watch brake lights if lights dont always come on while they are pushing pedal replace brake light switch it will solve the problem, before replaceing switch make sure all electrical connections going to switch are makeing a good connection

Aug 09, 2014 | 1997 Toyota Avalon

1 Answer

Park brake light stays buick century


if the fluid is brown and dirty it maybe effectn the abs module-can ruinit but u stil hav regular brakes--get car scanned at a partsplace fora readout and clear the lite--modules can cost 1000$ but remembr their just a luxury--good drivers dont need antilock brakes

Sep 11, 2013 | Cars & Trucks

1 Answer

Hummer H3 airbag light wont go off


Airbag light on in a Hummer H3 Dashboard???Here is the fix...
Start the engine of your car, set the parking brake, hold the regular brake pedal down with your right foot. Push down the parking brakepedal to its fully-applied position with your left foot. Now while you are still holding the regular brake pedal down. Quickly release the parking brake, Pull the bottom edge of the lever, located above the parking brake pedal, with the parking brake
symbol, directly rearward to release the parking brake. Make sure pedal snaps hard all the way back releasing the parking brake... If this doesn't work the first try, try it 3-5 times and it shall work... The airbag light will go off...


NOTE: The parking brake pedal is located to the left of the regular brake pedal, near the driver's door.
&

The parking brake lever is located above the parking brake pedal, with the parking brake symbol.

May 28, 2012 | 2006 Hummer H3

2 Answers

How to release tension on parking brake cable to remove from rear caliper - 2008 Ford Taurus X


you should'nt have any tension on the parking brake,unless it's on. check the parking brake to insure that it's in the off position. chock" the rear wheels,to make sure the car does'nt roll while you're jacking it up and "always use jackstands,do not trust your jack" does your brake caliper piston have a + on it?it will be on the brake caliper piston itself, if so,then you need to back the brake caliper piston back in by turning it counterclockwise,auto parts stores sell a special tool to back the brake calipers back into place, i've always used a straight screwdriver,to turn the piston counterclockwise some do turn clockwise though to retract the brake piston. a simple call to the auto parts store where you're purchasing the brakes will tell you which way the piston will need to be retracted.other wise,it's a simple brake replacement,just push the brake caliper cylinder with a "C" clamp to retract the brake caliper, also,if you are replacing brake rotors,purchase the brake kleen to spray on the new brake rotors when you replace those.they have a clear film on them,you'll need to remove that film to insure no future issues with the brake rotors.simply spray the front and back of the brake rotors with this spray to remove the protective "film"and as always,thank you,for choosing fixya.com!

Apr 13, 2011 | 2008 Ford Taurus X

2 Answers

Where i can find the hand brake


There is no hand brake. It is foot operated. The pedal will be on the driver side kick panel, and the release handle is under the dash in the same area.

Feb 17, 2011 | 1998 Dodge Caravan

1 Answer

The parking brake on my 99 GM Jimmy is tuck on


If you don't often use the parking brake iy could be rust and crud inside the cable sleves.
If you a regular parking brake user, then it might be a failure in the mechanisum associated with the brake cable and release handle.

Oct 08, 2010 | 1999 GMC Jimmy

1 Answer

Parking brake release


There should be a manual release. Reach up along the parking brake pedal. Ford has a manual lever that you pull toward yourself to release the parking brake. Hope this helps our with your problem. Best of luck.
Greg

May 30, 2009 | 1997 Ford F150 Regular Cab

2 Answers

Releasing Parking Brake


adjust the park brake cable first (3 pedal clicks and brake should start to engage the rear wheels) then lube the park brake ratchet release parts (under the dash) with WD40, this should take care of the problem.

Jan 12, 2009 | 2000 Chevrolet S-10

Not finding what you are looking for?
2003 Ford Windstar Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...