Question about 1991 Acura Legend

1 Answer

Acura Legend 1991. trying trying to fix front turn signal..

I have an Acura Legend 1991. I am trying trying to fix the turn signal on the front driver side. One of the 2 wires to a brown plastic part with a metal contact to fit intot the bulb assembly is cut.

I cleaned the cut wire and try to put in back into the plastic part but I do not see a contact point of where to reattach the wire. Any idea?

Thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Acura Master
  • 22,114 Answers

Buy a new one ,or solder 2 wires to the bulb and then join this to the two existing wires of the loom,drill a hole in the bottom of the bulb holder so the wires can run through it so you use the old bulb holder to hold the bulb in place in the light

Posted on Nov 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the freeze plug located on a 1991 Acura Legend


more info on freeze plug failure? - The Acura Legend & Acura RL Forum

www.acura-legend.com/vbulletin/.../more-info-freeze-plug-failure-1436...

May 29, 2010 - 5 posts - ‎2 authors
my mechanic told me that my freeze plugs could have failed, i have already searched ... Car 1: 1991 Acura Legend ... Car 1: 94 acura legend ls. anti freeze leak
3 posts
May 11, 2010
Easiest way to
7 posts
Jul 17, 2007
Manual transmission fluid change help
13 posts
Apr 7, 2007
engine block heater?
15 posts
Dec 21, 2003
More results from www.acura-legend.com

Where is the freeze plug located on a 1991 Acura Legend ...

www.fixya.com/cars/t26009696-freeze_plug_located_1991_acura_legend
1 hour ago - where is the freeze plug located on a 1991 Acura Legend - Acura Cars & Trucks question.

Acura Legend leaking freeze plug Questions & Answers ...


Dec 16, 2015 | Acura Cars & Trucks

4 Answers

Why won't the fan motor shut off on my 1991 acura legend?


Hey chandralebea,

Try first by replacing the cooling fan engine temp sensor switch, as this may be the cause.



Good Luck

Jul 29, 2012 | 1991 Acura Legend

1 Answer

What is the piston firing order for a 1991 acura legend ls


Firing order is 1-4-2-5-3-6. Back cylinders are 1-2-3 (passenger side to driver side). Front cylinders are 4-5-6 (passenger side to driver side) hope this helps.

Apr 18, 2010 | 1991 Acura Legend

1 Answer

My low beems wont turn on when i turn them on, i thing that the ground for the headlights isnt connected. When i turn my high beems on, they work just fine, as well as my turn signals, and tail lights. The...


could be a relay (I believe they are located under the battery its been a while since Ive worked on one) you could also give an enthusiasts club a try I believe yuors is a second gen www.acura-legend.com may be able to help you with this. good luck

Dec 13, 2009 | 1991 Acura Legend

1 Answer

D drive blinks 1991 acura legend


One of your redundant magnetic speed pick-ups are bad. Probably a couple hundred bucks service from your dealer. Worth it. I also had a low idle problem when this happened; car would die at low rpm. New mag pick up fixed that also.

Jun 24, 2009 | 1991 Acura Legend

1 Answer

1990 acura legend body kit


a 91-95 bodykit will not work unfortunatey.but you can purchase one for older legends. Try Hondatuner magazines website

Apr 14, 2009 | 1990 Acura Legend

1 Answer

How to change front pads on 1991 acura legend


try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Mar 20, 2009 | 1991 Acura Legend

1 Answer

1991 acura legend blinkers


The thermal flasher is sometimes on the fuse panel. The fuse panel is usually located on thelower part of the console just to the left of the drivers Knee. There will be a detent on the panel where you can pull the panel off.


Hope this helps

Good luck Loringh

Oct 22, 2008 | 1991 Acura Legend

1 Answer

91 acura legend


There is a connector under floor mat on front passenger side.
With the car turned off, jump this contactor out and turn the car to on position. After 2 seconds the abs light will blink given you codes.
After you fix the problem, you will need to remove the jumper, and pull all 3 abs fuses. Wait 3 seconds a reinstall the fuses. Now plug the connector back into its holder.
Now start the car, and the code should be cleared.

Sep 29, 2008 | 1991 Acura Legend

1 Answer

1991 Acura Legend


Check the brake oil level maybe too low. Replace the pads

Aug 12, 2008 | 1991 Acura Legend

Not finding what you are looking for?
1991 Acura Legend Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...