Question about 2004 GMC Sierra 1500 Crew Cab

Open Question

I can't turn the key in my gmc sierra 1500 pickup. The shift handle will not move as well. The wheels are not locked,but I can't start the truck becuse the key won't turn. Can you help me ?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: GMC truck exhaust diagram

GUESSED AND IT WORKED!

Posted on Jul 31, 2008

  • 507 Answers

SOURCE: 1990 GMC Sierra 4x4 1500

the connections near the front axle that activate the motor to engage the system aren't melted? That's a comon problem for that body style. If there good, sounds like it could be that motor itself. To figure out if it's you motor or transfercase, jack up the rear end, have a friend inside shift into 4 wheel drive, or try to, and put it in gear and apply some gas. If the front driveshaft is turning then it's something with the front end. If not, farther back in the system.

Posted on Sep 22, 2008

  • 1118 Answers

SOURCE: Replace starter on 1992 GMC Sierra pickup truck

First thing unhook positive battery cable, unhook main cable on starter selanoid and small wire on selanoid (there may be 2 small wires) There may be a bracket on front of starter that has to be removed, and then the 2 main bolts that hold it to engine block and it should come out.

Posted on Feb 14, 2009

cshubart
  • 146 Answers

SOURCE: My Power window on my 2003 GMC Sierra 1500 Truck

if your main switch panel still works the passenger window and if door locks still work probaly bad window motor

Posted on Oct 21, 2009

  • 124 Answers

SOURCE: 4wd will not engage on my 1996 GMC Sierra 1500 pickup

Ok the drive shaft will spin thats good. remove the front driff actuator and see if the plunger extents. if it doesn't check that the power and grond ar ok. If they are then replace the actuator. Just so you know the two actuator may be diffrent. If it has been replaced no problem. If it hasn't ever been replaced then ther is a updated part it come as a kit witha harness spacer and actuator.

Posted on Dec 17, 2009

Testimonial: "Fixya pointed me in the right direction to find the problem. It was in fact the front actuator which was not expanding. The 4wd is working. Thanks."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2008 GMC Sierra 1500 4 wheel drive with a 4.8 motor I have no power to my fuel pump fuse.


Chevy Silverado and GMC Sierra Fuel Pump/Fuel System - Edmunds.com

forums.edmunds.com > Chevrolet > Chevrolet Silverado 1500

Mar 20, 2011 - 30 posts - ‎19 authors
Learn more about Chevrolet Silverado 1500 at the Edmunds.com Car Forums! ... problem with my 2000 GMC Sierra 1500 4.8LTR V-8 you described in your post. .... Ihave a 2008 gmc sierra last 8 vin 8Z160870 4WD pickup was ... removed power and truck died. have no power at 20amp pump fuse, key on ... Chevy Silverado and GMC Sierra Starting Problems ...
30 posts
Apr 18, 2013
8 - Car Forums at Edmunds.com
30 posts
Nov 7, 2011
9 - Edmunds.com
30 posts
Oct 28, 2008
More results from forums.edmunds.com

SilveradoSierra.com • Cranks but wont start. Fuel problem ...


Jan 25, 2016 | GMC Cars & Trucks

1 Answer

2005 Sierra ignition key will not turn


Your title is confusing between the 2 model years listed, but here's what I can suggest. Either way it sounds like a worn out ignition key cylinder that is just worn out. However, the '97 pickups have the steering wheel lock feature when the key is in the off position. You might want to try moving the steering wheel side to side and see if it is bound up on the locking mechanism. If it's a 2005 truck, that isn't the case and it is most likely a bad key cylinder

Dec 31, 2013 | 1997 GMC Sierra

1 Answer

2008 GMC Sierra pickup. Driving and all of a sudden it shut off then turned back on; the doors unlocked then locked again. Now it won't do anything. Checked the oil and it was empty - no oil at


Running with no oil is death for the motor ( Seized). When the alternator stopped working because the engine stopped the door lock control opened the door locks as it said you were below the required speed to have them locked

Mar 31, 2013 | 2008 GMC Sierra 1500

1 Answer

How to get my 1997 sierra gmc pickup to shift out of park


Problem could be the brake switch or the solenoid that locks the shifter in park.
You may be able to turn the key switch past lock but not on, and then take the shifter out of park. The lock solenoid would need to be tested.

Jan 17, 2013 | 1997 GMC Sierra

1 Answer

My steering wheel is locked up on my 1997 GMC 1500 and i cant get the key to turn over! what do i do?


I had the same problem, mechanic told me to get a new key made, as the old one was worn out. Got a new key and no more locking of the steering wheel.

Aug 06, 2010 | 1997 GMC Sierra

1 Answer

When i shift my 2000 gmc sierra into 4wd it does'nt want to turn


the actuator on the diff might be stuck. I had a 97 sub and it felt funny when turning hard but turns out i had it in four high. make shure your in 2 high and change the diff lock selenoid

Feb 03, 2010 | 2000 GMC New Sierra 1500

3 Answers

4 wheel drive will not engage on my 1989 gmc sierra 2500?


actually that first soultion is wrong it is correct on smaller pickups but on the full size pick ups they use a differnet sytem
there a electric actuator on front axle
there be two elctrical plugs on front axle u want the bigger of the two other one is just to turn the 4 wheel drive light on
un plug actuator then remove actuator after it removed plug it back in but leave it out of axle turn key on and shift down to 4 wheel drive the actuator should move out if it dont that your problem if i does move this isnt your problem it either the tranfer case or in front axle

Jan 07, 2010 | 1989 GMC Sierra

1 Answer

I need instructions on how to change out the ignition switch on a 2004 gmc 1500 pickup truck


Hello Steve...The lock cylinder will come out if you can turn the ignition switch. You have to remove the bezel around the steering colunm, the plastic trim behind the steering wheel. There is a small hole on top of the ignition lock housing, you need to turn the ignition to the run position, move the shifter to drive(so the starter does not enegage) use a small pick to push in the small hole and turn the ignition to the start position. The lock cylinder should now slide out.
I will post a schematic.
You do not need to remove the steering wheel.

Happy Holidays...good luck, i hope this helps, please rate me a fixya.

ce935df.gif

Dec 25, 2009 | 2004 GMC Sierra 1500 Crew Cab

1 Answer

4wd will not engage on my 1996 GMC Sierra 1500 pickup


Ok the drive shaft will spin thats good. remove the front driff actuator and see if the plunger extents. if it doesn't check that the power and grond ar ok. If they are then replace the actuator. Just so you know the two actuator may be diffrent. If it has been replaced no problem. If it hasn't ever been replaced then ther is a updated part it come as a kit witha harness spacer and actuator.

Dec 14, 2009 | 1996 GMC Sierra

1 Answer

JUMPS OUT OF 4 WHEEL DRIVE


there is a lock who mainteins the 4 wheel lock ,so you must change that or adjust that.

Sep 19, 2009 | 2005 GMC Sierra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...