Question about 1991 Honda Civic

1 Answer

How to install cilinder head on honda civic 1.5

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,309 Answers

Better get a manual, and follow it to the letter, you will need a torqe wrench, new head bolts, timing belt etc, this is a critical operation , make sure to work in a dust free environment, never touch mating surfaces with your fingers, all surfaces should be squeakyclean as in white gloves, replace anything that is iffy, new oil new coolant also, good luck

Posted on Nov 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the head bolt torque settings for a 95 honda civic dx 1.4


there is not a 1.4L listed in the 1995 civic dx there is a 1.5L and a 1.6L

1.5L

D15B7 & D15B8 engines
step 1 22lbs
step 2 43lbs

D15Z1 engine

step 1 22lbs
step 2 53lbs


1.6L VTEC

step 1 22lbs
step 2 53lbs

Sep 14, 2011 | 1995 Honda Civic

1 Answer

99 Honda civic 1.6 engine torque specs and sequences for cylinder head


Tighten the cylinder head bolts to their final torque specification in two steps. Use a crisscross sequence starting with the bolts at the middle of the head and working toward the outer bolts.
  1. Step 1: Tighten each bolt to 22 ft. lbs. (30 Nm).
  2. Step 2: Tighten each bolt to 61 ft. lbs. (85 Nm).

zjlimited_1681.jpg

Fig. Cylinder head bolt loosening sequence - 1.6L (B16A2) engines (click image for zoom)

Hope helps.

Aug 05, 2011 | 1999 Honda Civic

1 Answer

I repalce timeing belt i did evertings put it back it whold not start 2000 honda civic got over heat i change head gaskit and timeing belt.


everything hooked up wires ,ect. check timing and no.1 up compression strke & rotor on distuber is on no.1 wire

Nov 05, 2010 | 2000 Honda Civic

1 Answer

Torque para cabeza honda civic motor 1.6


1996-97 Civic and Civic del Sol
1.6L (D16Y5, D16Y7 and D16Y8) ENGINES

Tighten the cylinder head bolts to their final torque specification in four steps. Use a crisscross sequence starting with the bolts at the middle of the head and working toward the outer bolts as follows:
  1. Step 1: Tighten each bolt to 14 ft. lbs. (20 Nm).
  2. Step 2: Tighten each bolt to 36 ft. lbs. (49 Nm).
  3. Step 3: Tighten each bolt to 49 ft. lbs. (67 Nm).
  4. Step 4: Retighten only the two center bolts to 49 ft. lbs. (67 Nm).

Hope helps (remember to rate and comment this).

Sep 23, 2010 | 1997 Honda Civic

1 Answer

Hi what is the head torque on a 2002 honda civic


Dont forget to apply clean engine oil to the threads of each bolt for proper torquing. Then finger tighten. Then

    1. Tighten the cylinder head bolts to their final torque specification in 4 steps. Use a crisscross sequence starting with the bolts at the middle of the head and working toward the outer bolts as follows: Step 1: Tighten each bolt to 14 ft. lbs. (20 Nm).Step 2: Tighten each bolt to 36 ft. lbs. (49 Nm).Step 3: Tighten each bolt to 49 ft. lbs. (67 Nm).Step 4: Retighten only the 2 center bolts to 49 ft. lbs. (67 Nm).
    1. Step 1: Tighten each bolt to 14 ft. lbs. (20 Nm).
    2. Step 2: Tighten each bolt to 36 ft. lbs. (49 Nm).
    3. Step 3: Tighten each bolt to 49 ft. lbs. (67 Nm).
    4. Step 4: Retighten only the 2 center bolts to 49 ft. lbs. (67 Nm).


  • Mar 25, 2010 | 2002 Honda Civic

    1 Answer

    I need instructions on how to remove/install headlight assembly on a 1990 civic ex 4 door


    open the bonnet, unlock the latch for head lamp cover the and remove the head lamp cover and replace the head lamp.

    Sep 18, 2009 | 1990 Honda Civic

    3 Answers

    How too put in distributor for a 1995 honda civic


    hi man the Honda 92 to 95 has the same specs with little differents so try to go to this web
    http://www.1993-honda-civic.com/category/radiator/
    and u will find any thing u want about Honda Civic 1993 which is the sam as 1995 so try it hope it will work buddy

    Jun 27, 2009 | 1995 Honda Civic

    1 Answer

    1995 Honda Civic Spark Plug Wiring


    The spark plugs are numbered starting on the drivers side (1) to the passenger side (4), the distributor rotates clockwise, and the firing order is 1 - 3 - 4 - 2

    Oct 18, 2008 | 1995 Honda Civic

    1 Answer

    Cylinder head


    depends on engine code, and single cam or twin cam. check your code. D16W4 sohc stage 1. 29nm stage 2 72nm. D16Y5. stage 1 20nm. 2. 49nm. 3.67nm . 4. 67nm. there are 2 other codes for sohc engines these are the same as D16W4. DOHC engine as follows B16A2 stage 1. 29nm. 2. 83nm. hope this helps, if you are ot sure give m the exact engine code and i can verify.

    Sep 05, 2008 | 1995 Honda Civic

    Not finding what you are looking for?
    1991 Honda Civic Logo

    Related Topics:

    88 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Honda Experts

    yadayada
    yadayada

    Level 3 Expert

    76649 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Kevin Daniels

    Level 3 Expert

    1455 Answers

    Are you a Honda Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...