Question about 2002 Jeep Grand Cherokee

1 Answer

My rear wiper is getting stuck between the rear window and the the where the wiper sits. I don't know if a piece came off the clip for the wiper or what.

Posted by on

  • bartman1850 Nov 15, 2009

    what's a spline?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 600 Answers

Try moving the arm one spline down so it parks off the glass then it should cross the gap between the panel and glass.

Posted on Nov 15, 2009

  • Chris Edwards
    Chris Edwards Nov 15, 2009

    Lift up the plastic cover where the wiper arm attaches to the spindle, there is a nut underneth the cover, undo this and lift up the arm and wiggle it loose (at this point if it is too tight you have to borrow or but an extractor) when loose you will see the spindle has little grooves in it called splines, move it round just one spline and tighten it up.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace my rear wiper blade ?


What type of car ? Most have J shaped arm, on inside of arm towards window there is small clip you push in, towards wiper and it unlocks. slide wiper toward bottom of arm, pull wiper around clip that is still on wiper, your done. new one when wiper clip is in place it will click in to place.

Feb 27, 2015 | Cars & Trucks

1 Answer

How do I remove rear door panel on 2005 Galant


not sure about yours but most cars they have pop clips. you will have a couple screws hiding under some plastic clips. then if its a manual window the crank would need to be removed they have a clip on the back side. a screwdriver can pop the clip off I use a flat piece of metal to get it off. and then its a matter of prying or sliding in some cases. to get the panel to move.some lift up. others just pull towards up. you wont know till you pry on the panel to see where its stuck and either find the screws or another clip.

Feb 11, 2015 | 2005 Mitsubishi Galant

1 Answer

How do I change rear wiper 2010 gmc terrain?


take your finger or small screw driver pry small flat shiny piece that has a small bend on it prey that back a little. What that piece does is it sits against the shaft keeps the wiper from coming off your just prying it out enough so you can pull the wiper off. Some times these wipers have been on a long time you have to tap the lightly to free them up not to hard easy. also look at your new wiper that you bought you will understand it better. Hope this helps

Sep 23, 2014 | 2010 GMC Terrain

1 Answer

How to take off the rear windsheild wiper on a 94 grand cherokee


You will need a 13-inch wiper blade for the rear window. 1 - When removing the wiper blade lift the wiper arm away from the window. ----- 2 - With one hand holding the wiper arm press the small tab on the underside of the wiper blade where it meets the wiper arm. ----- 3 - Slide the wiper blade off of the arm by pulling the center toward the bottom of the arm.----- 4 - Lightly lay the wiper arm on the window.----- 5 - Prepare your new wiper blade by taking the curved part of the plastic clip and line it up with the curve of your wiper arm. ----- 6 - Lift the wiper arm and press it through the center of the wiper blade up and over the plastic clip. 7 - Pull the wiper blade up until it clicks. Place the arm back on the window.

Jan 11, 2012 | 1994 Jeep Grand Cherokee

1 Answer

Remove rear wiper arm 1995 jeep cherokee


on some of these models, there is a plastic piece made into the wiper arm, remove the plastic piece, and arm should be able to be brought backwards, if no plastic piece is there, then you press onto a small plastic clip that is on the wiper arm, and push wiper blade downward, this should release the wiper blade.

Apr 22, 2011 | 1995 Jeep Cherokee

1 Answer

The rear window wiper blade in stuck in an "up"


frozen motor. remove a rear door cover, and turn on rear wiper and listen for motor noise, also check fuse

Nov 05, 2010 | 1994 Mercury Villager

2 Answers

Rear window washer does not spray fluid. When I push the rear window washer button, the front washer/wipers turn on. The rear wipers work normally.


I have the same problem with my 2000 chevy blazer as skornec had posted. I kinda already figured the hose or spray nozzle was plugged. But the problem with checking those items is that I don't know where the hose is located to the back wiper. And the only thing that could be I see that could be the spray nozzle doesn't even have holes that washer fluid could spray from. So basically I just would LOVE if someone could please inform this lame brain of where to find the spray nozzle on the rear window and where in the interior of my blazer does the washer hose run.

Apr 02, 2010 | 2000 Hyundai Accent

1 Answer

The wiper arm is not conacting the rear window -1994 Audi CS 100


the arm is probalby just stuck. apply penetrating oil, give it a few taps, tapping will help distribute the oil, leave it sit for awhile and pry it off. repeat a few times if necessary. make sure you are pulling the arm straight off and not at an angle

Mar 13, 2010 | 1994 Audi 100

1 Answer

Wiper Arm Change gone wrong..help


hi don,t panic all the wiper arms i have come across are metal and have a plastic bush in the ends that are greased for ease of rotating the problem you have is which end haspoped off it could be the centre bush or it could be the passenger side you will need to strip covering away to see and to get at the arm to get it back on they usually press back on sometimes are a little awkward but can use mole grips or plyers to clip it back together the secret is no to get flustered with it best of luck yates210456

Oct 06, 2008 | 2000 Kia Sportage

1 Answer

Door lock stuck


The window handle is attached w/ a clip on the back, it's shaped like a horse shoe. There are 2 ways to remove it, u can buy a special tool at the auto parts store ( I don't think they cost much), the tool slides behind the handle and pushes the clip off. I've taken them off w/out the tool. One way is to get a sturdy piece of wire (14 gauge electrical house wire, remove and strip insulation off one of the wires, bend it into a small hook) u should be able to hook onto the clip and pull it off. U have to figure out w/ a flashlight and mirror, which way the clip is positioned so u know where to hook it. Another possibility is to use 2 small flat screw drivers to try and push the clip off, but be careful u don't damage the interior using that method. Let me know how u do countrycurt0

Oct 01, 2008 | 1996 Honda Accord

Not finding what you are looking for?
2002 Jeep Grand Cherokee Logo

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...