Question about 1997 Chevrolet Blazer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
go to autozone.com, enter your vehicle specs, and follow the prompts for the repair section, then to electrical diagrams..........and its FREE!
Posted on Jul 27, 2009
The adjustment screws/nuts should be located either on the top of the headlamp assembly,
behind the headlamp assembly, or near the frame rail by the radiator
You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well
Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)
For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.
Posted on Nov 04, 2009
My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.
CLICK on the following LINKS. It has the Belt Diagrams you will need.
I'm not sure if you have the Blazer or the S10; however I have included both Links below.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies.
For the Blazer:
For the S10:
Posted on Mar 07, 2010
Tips for a great answer:
Jun 15, 2013 | Cars & Trucks
Oct 10, 2010 | 1989 Chevrolet S-10 Blazer
Oct 06, 2010 | Chevrolet Blazer Cars & Trucks
Apr 07, 2010 | 1997 Chevrolet Blazer
Jan 20, 2010 | 1997 Chevrolet Blazer
Feb 19, 2017 | 1997 Chevrolet Blazer
395 people viewed this question
Usually answered in minutes!