Question about 2001 Chevrolet Blazer

1 Answer

Chevy blazer 2001 2door 4.3 liter replced fuel pump dont know how to reinstall plastic fuel line clamps at pump

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

They just compress using pliers, if they are broken, you will need to put small hose clamps on there.

Posted on Nov 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 chevy blazer, reattaching the fuel lines to the new pump. I didnt make them and i dont wanna attach them wrong


The fuel pressure and return lines are two different size. They can only go on one way. The evap emissions line has a connector without a white or clear looking plastic piece in the quick connect.

Sep 22, 2015 | Cars & Trucks

Tip

How To Replace The Fuel Pump On A 1998 Chevy Blazer


To start, the fuel pump assembly is mounted in the gas tank. Jack up the truck and support with jackstands. From underneath you will need to disconnect the filler and overflow hoses from the tank, by removing the worm gear clamps holding the hoses to the metal filler tubes. Unbolt the two straps that are bolted to the underneath side of the body holding the gas tank to the underside of the truck, support the tank with jack, after the straps are undone, lower the gas tank some to get enough room to remove the fuel lines and the fuel pump/sending unit connector, also remove the small vacuum hose at the other end of the tank. Let the tank down, with a hammer and a screwdriver, turn the lock ring until it releases the pump assembly and remove. You may want to drain the gas from the gas tank, it always seems that the fuel pump goes out when you have alot of gas in the fuel tank, that will help when you go to put the fuel tank back into the truck. Reverse the procedure to install. Some Blazers have a plastic tank and some have a steel tank. You'll need to know which one when you go to buy the new one. They run about $250.00 at Auto Zone. I would also replace the fuel filter at this time also so you are starting out with everything fresh. Should take 2-4 hours to do the job. Have a few large gas cans to put the gas from the tank in.

on Mar 07, 2010 | Chevrolet Blazer Cars & Trucks

3 Answers

1997 chevy blazer what could it be


I had a 1997 s10 4*4 with the 2.8 v6.
mine do that I had to pull the gas tank replace fuel filter plus had to take undo the line from the intake and blow air thru it. Make sure all u're filter are replaced and y u have the tank down replace the fuel pump. I hope this helps u

Jun 23, 2014 | 1997 Chevrolet Blazer

2 Answers

I dont know where the fuel pump is located on my chevy blazer and when i find it how do i replace it? do i have to drop the gas tank?


yes you have to drop the tank as the pump is in the tank.WARNING you may end up putting lines and a sender in aswell if they are rusty.

Dec 02, 2010 | 1991 Chevrolet S-10 Blazer

1 Answer

Where is the fuel pump relay located in a 1997 chevy blazer 4-dr.


In the glove box behind a plastic panel. There are 3 relays in there. The fuel pump is the one closest to the drivers side.

Mar 31, 2010 | 1997 Chevrolet Blazer

1 Answer

Why wont my 99 chevy blazer temperature warm up?


You may have vapour lock in your heater lines. Start engine, put heat lever on high, disconnect one of the lines on your heater core, the one on the flow out side, & see if you have any air coming out. Once antifreese comes out stick line back on & retighten clamp. Make sure your cooling system is topped off. Also your water pump may not be functionihg to it's maximum. Take rad cap off cold & view flow rate. If inadequate you may have to replace the water pump. Good luck!

Dec 09, 2009 | 1999 Chevrolet Blazer

2 Answers

Engine turns but not starting fuel pump is working 1993 chevy G20. it is getting fuel. it tries to start then just turns over


hmmm. if your sure that it is getting fuel than the starter itslef might be going out...

Mar 30, 2009 | 1993 Chevrolet G20

3 Answers

99 blazer no start


it is definitely the FUEL PUMP or FILTER then ;-) - or a blockage in the line.
I have heard it said that when the Chevy fuel pump goes, it self destructs and may leave (clogging) pieces in the tank (ugh)
Pump is IN the tank, so be extremely careful if you try to fix yourself. Fuel filter us UNDER the tank and cost $11.99 at Walmart.
My pump makes noise when I turn on the Key (but not starting) and so I thought it was OK too... but a Pressure check at PepBoys showed it LOW. $351.00 to drain, clean and replace pump. (another ugh) so I toodled over to Wal Mart, bought a Fuel ffilter for $11.99 and swapped ourt (pay attention to the ARROW it must point towards the FRONT of the car ;-)

Mine was full of coffee-like tar sticky stuff, so a quick change, new clamps (Use SSteel as these will not rust) and Bang, I was OK again.

CLAMP the fuel line coming in from the tank with 2 pieces of wood and a VVise-Grip pliers or C_Clamp. Don't want a face full of gas. Do the same on the ENGINE side of the filter.
Looen the 2 hoseclamps or twist them to break of rusted, and spen some time prying off the old hoses. Put a box full of crumpled newspaper or shredded stuff *sawdust works too) under the filter (on the ground) to catch the fuel or goo that will run out of there when the hoses pop off.

I took off the clamp on the Engine side, and let the fuel from the engine run out into a jar and it was uckky goopy brown too, but the last was clear so I let it drip out. After I wiggled the hoses and pried the old one off, I loosened the 3/8 nut and bracket and slid the OLD one out, and put the NEW one in. Then I put dishsoap on the nipple of the NEW filter and inside the old hose and pushed it on, then put on the hoseclamp and screwed it down tight. I then reattached the front hose the same way, put on the clamp, and now I had a new filter on the car. I still suspected I'd have to swap pumps.. but it was a $12.00 chance I'd definitely recommend to anyone ;-)

Make sure clamps are on RIGHT and hand TIGHT, hose on all the way and both clamps 1/4 inch from filter body, then take off the tank side Vise-Grip or C_Clamp and look for leaks. OK?

Then take off the ENGINE side clamp and look for leaks. OK?

Now go turn on the key so you hear the pump, let it stop making noise, and turn key OFF. Do this 20x to get fuel into the engine again. Then PUMP the GAS pedal 3x, hold to floor and start the car. As soon as it goes, slowly pump the GAS pedal and keep it running, but not RACING the motor!, and get it to idle again by itself (all air out of the fuel line)

Now go back and look for leaks. If there are any, STOP the motor and tighten clamp(s) just a bit. You dont want the clamp to CUT or CRUSH the hoses, just hold them tight.

Well Done!!

Mar 27, 2009 | 1999 Chevrolet Blazer

2 Answers

2002 chevy blazer fuel pump (4 door)


yes you have to drop the tank. you will also need a fuel line tool to unhook the fuel lines. before you drop the tank see if tou can reach and wiggle the electrical connection on the top of the tank. these pumps have a pigtail issue. please rate

Dec 08, 2008 | 2002 Chevrolet Blazer

Not finding what you are looking for?
2001 Chevrolet Blazer Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...