Serpentine belt was squeeking and sprayed some pam on it and it came off. I need a diagram to get it back on. can you send one to [email protected]

check the pulleys --power steering pump --alternator---- belt may not be your problem ---

The picture is for a zetec. Let me know if wrong diagram?

If the squeek stops as the motor warms up replace it. You can also purchase some squeek stop spray and see if that helps before buying a new belt

2000 CHEVROLET IMPALA - V6 3.4L 207ci GAS FI N E




2000 CHEVROLET IMPALA - V6 3.8L 231ci GAS FI N K




Hope thats helped (remember rated this) Good luck.

what????they never had a serpentine belt....do you mean the timing belt???? [email protected]

I have the diagram........send me your email and I will send you the picture. [email protected]

There should be a diagram under the hood,If not e mail me an I will send you one [email protected]

email me at [email protected] and i will send you the diagram

send an email to [email protected] and I will send the diagram to you

Keith,it sounds like you may need to clean the grooved surfaces on your pulleys,you could remove the belt and use some aerosol brake cleaner and a stiff brush to remove any build-up on the pulleys.you could also try spraying the same on the pulleys while the car is running,just be sure and wear eye protection and don't get to close to any moving parts.