Question about 2003 Oldsmobile Alero

1 Answer

Sounds like my signal light stays on all the time even when not in use

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 832 Answers

You have to check the wiring of your signal lights. Start
at the signal light switch mounted at the steering column. Then, at the fusebox for shorted or melted terminal. Finally, at the signal light sockets, by taking off the signal light lens.

Posted on Nov 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What causes the driver side turn signal to stay on all the time


It sounds like something wrong with multifunction switch.

Apr 27, 2016 | 2006 Mazda 6

1 Answer

Why would my turm signal light stay on even when the car is turned off?


sounds like a hazard switch problem cycle the switch on/off and see
if the light goes off or on we had a problem with the multifunction
switches years ago sounds like your problem

Aug 01, 2014 | 1999 Buick Park Avenue

1 Answer

Why signal light wont turn off in 94 325i BMW


Do you mean it won't automatically switch off after you turn, or do you mean it stays on, either flashing or just permanently on?

If it's the 1st one "doesn't automatically switch off after turning" it sounds like your turn signal stalk is broken & needs replacing.

If it's a case of the light just continuing to flash or stay on well then it could still be your signal stalk or the relay which times the lights to flash on & off.

All these bits can be purchased for little money on eBay

Mar 17, 2014 | 1994 BMW 5 Series

1 Answer

Brake lights stay on even if i pull fuse or take off brake light switch


Sounds like the turn signal switch is bad, since the brake light circuit is routed through the turn switch.

Feb 12, 2013 | 2000 GMC Jimmy

1 Answer

I have a 2002 Volvo v70, 2.4t . The signal light on the right side stay on at all the time


I would think it is a short in the turn signal switch but I wonder how it is getting power with the key switch off.
I would unplug the switch and see if the lights go off. Could also be a short in the hazard switch.

Aug 15, 2012 | 2002 Volvo V70

1 Answer

My left turning light gets stuck just stays on even though you turn left and go back but my right turning light works fine


The turn signals are designed to tell you when a bulb burns out. Turn your signal light on and walk around the vehicle to check if the outside signal lights are working. Sounds like you have both front and rear bulbs burnt out for the left.

Mar 10, 2011 | Oldsmobile Cutlass Supreme Cars & Trucks

1 Answer

My 1998 ford explorer- the dash board turn signal lights stay on when the lights are turned on. also the engine temp gauge does not move even though the car does warm up. Any suggestions


The easiest thing to do is turn your emergency flashers on and off about 5 or ten times and see if it fixes it (sounds stupid but sometimes it works)Have you replaced any bulbs lately? I would check your turn signal bulbs to see if any filiments are shorted together. If you have trailer hitch wiring I would check for water in the connector and if it is not a factory wiring setup then I would completely disconnect it to see if it isn't feeding park lamp voltage back thru the turn signals.
Hope this helps

Apr 01, 2010 | 1998 Ford Explorer

1 Answer

Signals work when turning, but sounds stays on all the time


Sounds like you have another relay that is not happy. need to locate the where the sound is coming from. sorry thats a new one for that truck!

Aug 13, 2009 | 1999 Chevrolet Silverado 1500

Not finding what you are looking for?
2003 Oldsmobile Alero Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...