Question about 2006 Chevrolet Express

1 Answer

How do I replace a rear directional signal bulb?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 12,173 Answers

Open rear door and will see access screws that hold tail light housing remove screws and tilt out housing

Posted on Nov 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change signal light


Front, or rear? Front...raise hood look for inside wire connecting to the bad bulb...most bulb sockets release when twisted counter clock wise, and pull bulb assembly directly out...compare bulb type, remove and replace being careful not to touch new bulb with bare hands and human oils...)use gloves or tissue...the human oils in our hands contaminate the bulb and cause much shortened life...also use bulb grease on new bulb contacts for sealing, and longevity. Rear bulb go through trunk opening on inside to locate wires and bulb replace same as front...let me know front or rear for more explicit help.

Feb 01, 2013 | 2011 Chevrolet Malibu

1 Answer

My Turn Led Signal Can Not Blink


The LED lamps are not plug-in replacements for incandescent ones because they place a much lower load on the flasher.

Mar 07, 2017 | 1994 Mercedes-Benz C-Class

1 Answer

How to replace stop light?


Tail Lights
The procedure for removing and installing turn signal light bulbs is the same as that for brake light and taillight bulbs. Only the procedure for brake light and taillight bulbs is described here.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Disconnect the battery.
  3. Switch off all electrical connectors.
  4. Turn off ignition.
  5. Remove the rear light, as follows:
  6. Remove the rear striker mount cover.
  7. Reach behind the respective quarter panel trim and unscrew the knurled nut. Make sure the washer and spacer do not fall down.

c17hydro_74.gif

Taillight housing


  • Remove the rear light and disconnect the electrical connector.
  • Turn the bulb holder in the direction shown and remove from the housing


  • c17hydro_75.gif

    Turn the bulb holder in the direction shown

    1. Remove the bulb from holder.

    To install:


    1. Install the bulb in the reverse order of removal. When installing, make sure bulb holder engages in housing by turning in opposite direction.
    2. Install the rear light, as follows:
    3. Connect the electrical connector.
    4. Insert the rear light housing into the body opening.
    5. Insert the retaining bolt into the body opening.
    6. Insert the rear light into the cutout.

    c17hydro_76.gif

    Insert the rear light into the cutout in the direction of arrow


  • Slide the spacer and washer onto the retaining bolt, attach the knurled nut and tighten by hand.
  • Turn the bulb holder in the direction shown and remove from housing.
  • // // 0) preLoad.src = ctl00_cphLeft_chRepairTreeNav_tvTOC_ImageArray[i]; } ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.lastIndex = 31; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.populateLog = theForm.elements['ctl00_cphLeft_chRepairTreeNav_tvTOC_PopulateLog']; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.treeViewID = 'ctl00$cphLeft$chRepairTreeNav$tvTOC'; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.name = 'ctl00_cphLeft_chRepairTreeNav_tvTOC_Data'; //]]> var _strTreeScrollHidName = 'ctl00_hidTreeScrollPos';

    Dec 25, 2010 | 2000 Volkswagen Beetle

    2 Answers

    Turn signal doesnt flash when turned on???


    If your turn signal indicator is coming on but won't flash, it is caused by one of two things.
    1. A burned out bulb (or a bad circuit to the bulb)
    Check ALL the bulbs. Does it flash in one direction and not the other? The side that is not flashing will have a bulb that is not working. It may be a front bulb or a rear bulb, so check them all. Also make sure that there are the same number of bulbs illuminating on both sides. Some cars have 2 turn signal bulbs on each side in the rear. At first glance it may look like they are all working, then when you look closer you may find that only one bulb is illuminating on one side while there are two on the other.

    2. If both sides are malfunctioning and you are certain that all the bulbs that are supposed to light with the turn signals are working, then replace your flasher unit.

    Nov 11, 2009 | 1995 Buick Century

    2 Answers

    Signal lights dont work when breaking


    No,this is not normal,this normal when the emergency flashers are on,but not the turn signals.Check the bulbs(all of them)in the rear tail light assembleys.If you can not tell which bulbs are bad,replace them all.Does this vehicle have a trailer light plug?If it does,it could be in it.After the bulb replacement(look at bulbs in your hand to see if filiments are burned)replace the turn signal flasher.To find it turn key on,and left or right turn signal on,and listen,and feel for it under dash around the steering column.

    Aug 23, 2009 | 1988 Jeep Comanche

    1 Answer

    Left rear turn signal and brake light dont work


    You have a broken wire to the turn/brake light portion of the light as they use the same wire. Or where the plug goes into the light assy could be bad. Torsion mount lights are horrible and you should think about replacing with a universal light that you can wire direct.

    Feb 17, 2009 | 1997 Jeep Wrangler

    1 Answer

    DIRECTIONAL SIGNAL FLASHING QUICKLY


    This is caused by a burnt out bulb in the front or rear.

    Oct 31, 2008 | 2004 Pontiac Grand Am

    Not finding what you are looking for?
    2006 Chevrolet Express Logo

    Related Topics:

    165 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    76132 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8273 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...