Question about 2000 Dodge Durango

1 Answer

Front end makes a grinding noise when driving normal but does not do it in 4 wheel drive..what could be the problem and why wouldnt it do it in 4 wheel drive as well

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Dodge Master
  • 1,564 Answers

When you are in 4 wheel drive there is a constant force on all four drive axles. When you are in two wheel drive there is only force on the two rear axles. Therefore the front axle is worn either left or right but they should be repaired as a pair as not to disrupt the suspension tuning. Thank you, Dana

Posted on Nov 15, 2009

Testimonial: "thanx alot makes sense"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rincon. Why is there grinding noise in rear end and rear wheels will not drive?


Could be bad u-joints, wheel bearings. Raise rear of vehicle and rotate wheel by hand, if noisy remove and replace. Hope that helps.

Dec 18, 2015 | Honda Cars & Trucks

2 Answers

Why do I hear grinding noises while driving?


Hit in the rear axle may have damaged bearings or brake parts. Jack up the side you hear noise from, put on stand, then have helper rotate wheel while you look underneath and listen to see where noise is coming from. Use length of old fuel or heater hose, one end in ear, to locate exactly where noise comes from.

May 27, 2015 | 1996 Jeep Cherokee Country

1 Answer

Front end noise


Assuming that you have already ruled out the brakes, severely worn engine mounts can transmit vibration and noises from the engine which are not normally heard. You don't say in what I see but is the vehicle two or four wheel drive. Since you mention CV half shafts I have to assume it is at least front wheel drive. If the vehicle is four wheel drive then there is a front differential with bearings in it that may be at fault. Have you done both sides when you say "hub assembly". Defective hub bearings will make grinding noises which will change tone or intensity when turning, accelerating or braking however the noise is usually fairly constant unless they are only just starting to fail. CV joints don't normally "grind" unless they are really bad. They usually make progressively worse "clicking" sounds or "clunking" sounds especially when turning hard, changing gears or direction of travel (forward to reverse and back again). Do you have non-stock tires/wheels? Larger/wider than factory spec tire sizes can rub the fender wells when the car is moving or turning. Another thing it could possibly be is the air dam below the front bumper. If it is loose it will push down in the airstream while the car is moving and rub on the ground.

May 12, 2013 | Cars & Trucks

1 Answer

1994 ford ranger 4x4 hubs make grinding/clicking noise after taken out of four wheel drive


I think yours has the automatic locking hubs that slide over the the rotor hub. If this is the case than what has probably happened is a u-joint has gone bad and wiped out that auto hub.

Be prepared for some sticker shock on those hubs. they are not cheap. The usual fix for this is to replace the front axle ujoints and what ever hub is making the noise, hopefully just one.

Feb 14, 2012 | 1994 Ford Ranger Supercab

1 Answer

When i switch it into 4 wheel drive it makes a grinding noise and then wont kick back into 2 wheel


You should be totally stationary when you go from 2 to 4 wheel drive. There should be no grinding noise. Something has been broken, and I assume the transfer box is most likely, but it could also be the wheel hubs in front.

Sep 05, 2011 | 2003 Chevrolet TrailBlazer

1 Answer

I have a 2000 durango 4x4 it makes a grinding


might check the bearings to see if properly greased

Nov 14, 2009 | 2000 Dodge Durango

1 Answer

Front wheel bearings replacment in a 2003 ford taurus


since this is a front wheel drive car i wouldnt really advise doing this by yourself unless youv done stuff like that before. I would say its not so much difficult as it is tedious work and requires some time to complete.

Oct 07, 2009 | 2003 Ford Taurus

2 Answers

Rumbling & grinding under front end


Watch out! You might have a loose wheel! Check those wheel nuts. If not, a loose brake caliper, or last if not least, a bad wheel bearing. Don't drive it until you find out what the heck is wrong! Could be dangerous.

Jul 06, 2009 | 1999 Chevrolet Cavalier

1 Answer

99 Silverado 4-wheel drive not engaging


It does not seem that sufficient diagnosis was done. No, you cant give a specific diagnosis like that without tearing unit down. It's likely that they told you the most common failure and left it at that. Likely there is a problem with your unit...I think this becomes more of a trust issue than a mechanical one. A second opinion from an independent reputable shop may help but either way, you need to have it fixed. In not using it much, it makes me wonder how it got worn.
good luck

Mar 19, 2009 | 1999 Chevrolet Silverado 1500

Not finding what you are looking for?
2000 Dodge Durango Logo

397 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...