Question about Chrysler Sebring

2 Answers

I try to start my 2002 chrysler sebring and at times it will just click continously eventually it will start but idk what is causing this?

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Chrysler Master
  • 1,564 Answers

Make sure to remove your battery cables and clean them thoroughly, also have your battery checked for lifespan remaing it appears you are not getting enough voltage to the starter. What you hear is the solenoid trying to throw in and not going all the way.Also check your charging system(alternator) for integrity. Thank you, Dana

Posted on Nov 15, 2009

Testimonial: "very helpful and gave many options thank u soo much"

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 97 Answers

Weak battery. loose or dirty connections. starter going out

Posted on Nov 15, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2002 Chrysler Sebring sedan 2.7L keeps blowing #8 20amp fuse under hood. What is causing this

You may have wires that cross each other temporarily causing either a short circuit or a higher current level than normally would occur. These problems are extremely difficult to diagnose, due to the fact that the problem is there only for a short duration of time.

Feb 23, 2015 | 2002 Chrysler Sebring

2 Answers

My 2002 chrysler sebring 2.4L will not start turn key and hear no clicking noise nothing at all, lights and horn work , when i jumped the battery it did nothing no clicking. what should i try next?

Check if you have power at the starter from the ignition key
Try give direct power to the starter, if still not starts, you have a bad starter

Mar 20, 2013 | 2002 Chrysler Sebring

1 Answer

2002 sebring won't start.start/fuel fuse blew and was replaced.Car started normaly for two days then would not start. Fuse was not blown this time.

Car no start problem is sometimes very difficult to confirm. You try all the possible things, but still you get no fault and problem is still the same.--------
In that case, you need to check few things individually.
Check the spark,the battery,the crank, the fuel and other most possible parts. Click this link below for more details:--

Oct 27, 2011 | 2002 Chrysler Sebring

1 Answer

My ignition fuse blows every week or so on my chrysler sebring what could be causing this

your E.C.M. is starting to draw too much current,you should replace it,its hard to tell what component inside is causing it,just replace the unit

Apr 19, 2010 | 2002 Chrysler Sebring

1 Answer

When i try to start my car sometimes it will just click continously eventually it does start but idk what is causing this clicking?

This type of problem is generally associated with a loose or dirty battery cable connection.
It can also be caused by an internal battery problem, starter issue or battery cable failure. Your best bet is to have the starter, battery and charging system checked. You can take your vehicle to your local Auto Zone or Advance Auto and ask them to run the test for you, they will do the test free of charge for you.
Good luck.

Nov 15, 2009 | Chrysler Sebring Cars & Trucks

1 Answer

2002 Sebring Convertible Start/Fuel fuse blows intermittently


Aug 25, 2009 | 2002 Chrysler Sebring

1 Answer

2002 Chrysler Sebring Convert wont turnover

If you're not hearing a click from the starter check for a starter relay. May be burned out! DO you hear the fuel pump kick in when you turn the key on? If not something might have triggered your security system and locked you out!

Jun 28, 2009 | 2002 Chrysler Sebring

1 Answer

Car and radio wont turn on - everything else will

sounds like the problem I had last week (20 amp fuel pump fuse under the hood) but try all the fuses.

You ask "Fuel Pump" Heck, I dont know seems to control ALL the relays

Jan 06, 2009 | 2002 Chrysler Sebring

1 Answer

Clicking noise under hood of 2001 Chrysler Sebring

Sounds like you have a dead battery. You either need a jump start with jumper box or clean battery terminals and see if that works

Dec 02, 2008 | 2001 Chrysler Sebring

1 Answer

2002 Chrysler Sebring Sedan: Starter, alternator, both, or otherwise?

Clicking??? Probably starter/alternator. does the starter turn? The clicking, is that all you get when you turn the key? Have the battery checked and make sure its holding a charge. If battery holds a charge, its time to have your alternator tested, if the alternator checks, then the clicking may be the starter/soleniod. Places like autozone will check the battery/alt for free, provided you can still drive to get there.

Jul 19, 2008 | 2002 Chrysler Sebring

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides