Question about 2009 Ford Focus

1 Answer

Where exactly is the pressure sensor on the common rail of a ford 2.0 tdci 136 ps engine. I've just bought a diesel tuning chip and I can't see the connections from the diagram I was sent?

Posted by on

  • Duane Morse
    Duane Morse May 11, 2010

    follow your fuel rail up the backside of the firewall until you find it fairly easy to spot but somewhat tight to reach on some models

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,111 Answers

Follow the fuel line itself up the back side of the motor closest the firewall until you locate it some models are fairly easy to locate and fairly tight to access ..good luck .

Posted on Nov 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The 2005 Isuzu 4HL1 smoother E engine has no power over hills what could be th problem


loosing compression
fuel delivery

if its the DiD ...internal carbon build up

Jun 30, 2016 | Isuzu Cars & Trucks

2 Answers

2005 2KD Hiace, starts lazy,revs good when it starts but accelerator goes dead, check light comes on, then in about 2 minuets the engine dies. 093 code.


fault code is missing a letter and first number
so its P0093 large fuel leak

the fault list has list of what to check
http://www.obd-codes.com/p0093

Fuel injector failure, Fuel line common rail leak, Fuel pressure sensor malfunction
Fuel pump or lift pump failure, Fuel heater constantly on Fuel temperature sensor failure ,

Leaks at any point in the high pressure circuit Electrical connector corrosion or seating problems
Fuel pressure regulator malfunction Fuel filter plugged dropping the fuel line volume Injector pump leak
Fuel control actuator failure
Cascade overflow valve malfunction Short in the electrical harness at the injectors or to the ECM Fuel pressure limiting valve ECM failure
Copyright OBD-Codes.com

Jun 07, 2016 | Toyota Cars & Trucks

1 Answer

WHY DOES MY ISUZU 4HL1 ENGINE HAVE A HARD START ALWAYS?


no car stated, huge NPR truck no less.
no year stated
so no free book information on that engine,.
big diesel. 4HL1, no dash letter?
compression at spec.?
glow plugs work.,
filters clean. water in fuel,
does test fuel (spray'd) help? ???
injection problems
lack of startup air.(filter)


The 4HL1 is a common rail direct injection OHC 16V high-pressure fuel injection system diesel engine of 4.777 L capacity with electronic control system. Peak torque is 333 Nm, peak power is 140 PS (103 kW) at 3,000 rpm. Maximum torque is (34.0 kg m)'/1,500 rpm. Bore is 115 mm, stroke is 115 mm.
The 4HL1-N is a common rail direct injection OHC 16V high-pressure fuel injection system diesel engine of 4.777 L capacity with electronic control system. Peak torque is 333 Nm, peak power is 131 PS (96 kW) at 3,000 rpm. Maximum Torque is (34.0 kg m)'/1,500 rpm. Bore is 115 mm, stroke is 115 mm.
The 4HL1-TC is a common rail direct injection OHC 16 V turbocharged and intercooled high-pressure fuel injection system engine of 4.777 L capacity with electronic control system. Peak torque is 425 Nm, peak power is 160 PS (118 kW) at 2,700 rpm. Maximum torque is (43.3 kg m)'/1,500 rpm. Bore is 115 mm, stroke is 115 mm.
The 4HL1-TCS is a common rail direct injection OHC 16 V turbocharged and intercooled high-pressure fuel injection system diesel engine of 4.777 L capacity with electronic control system. Peak torque is 500 Nm, peak power is 179 PS (132 kW) at 2,700 rpm. Maximum torque is (51.0 kg m)'/1,500 rpm. Bore is 115 mm, stroke is 115 mm.

May 31, 2016 | Isuzu Cars & Trucks

2 Answers

Hi i have to push the gas pedall too much untill i m moving , it s not normal , can t fell the pover of the engine it s a tdci ford mondeo ,,,, thank u . pls help


this indication of ignition timing out of the manufacturer specification
You must do a mayor TUNE UP, the reason is that : PCM or ignition coil, wirespark, sparkplug, sensor, distributor or BCM can be faulty. see the diagram
Please RUN the scanner/computer for easy diagnostic/fixitt
God bless you6f6c47f0-17e3-46bf-bb37-51d4cf125383.jpg

Jul 12, 2013 | Cars & Trucks

2 Answers

I have a 2008 ford kuga 2.0 tdci 4x4 when its below 5ºc it will not start i have pluged a snap on scanner in and has come up with a fuel pressure fault any ideas ?


Diesel fuel tends to be sluggish to pump in cold weather and that is why some diesel cars and trucks have heaters in the fuel tank to overcome this problem. However I tend to think that the glo-plugs are not working as they should be. Have them tested . The fuel pressure fault may be the inability of the pump to pump enough fuel to do the job.

Apr 07, 2013 | Cars & Trucks

1 Answer

Injector control pressure sensor circuit low


I can't remember that year exactly so help me out it's been a while
is that a IDI diesel that has a injector pump sitting in top center front of engine (has all the fuel lines running off it) or is it a Direct inject engine that has the injectors all comming off a central fuel rail

IDI diesel = sensor is on pump front lower under cold throttle kicker coil

direct inject= sensor is on driver side at end of fuel rail toward fire wall

Apr 01, 2009 | 2003 Ford F350 Super Duty DRW SuperCab

Not finding what you are looking for?
2009 Ford Focus Logo

Related Topics:

350 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...