Question about 1986 Mazda 323

Open Question

Electrical wiring diagram of 1986 mazda 323

Please provide electrical wiring diagram of 1986 mazda 323 sedan automatic. fuse for radiator cooling fans is blowing

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 166 Answers

SOURCE: Timing settings

you may have forgotten to plug the fan sender unit in on the right side of the head if it is plugged in it may of failed witch is not uncommon.
as for the timing there is actually some small marks on the head it self and on the cam pulleys, also on the crank sprocket and the block if you cant find them i can send you a diagram.
if you can find the sender unit on the side of the head unplug it and earth out the plug with a split pin if the fans come on bingo get a new sender
good luck

Posted on Dec 14, 2008

Ad
  • 337 Answers

SOURCE: wiring diagrams

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528004ec14

Posted on Feb 10, 2009

RAhUL_hunk
  • 63 Answers

SOURCE: mazda 323 familia automatic is not changing gears only 1,2 and R

hi

it seems that the gear bushings have worn out. you need to take your car to a mechanic to have the bushings changed. Also, please check it your car has enough Automatic Transmission Fluid.

i am always here
kind Regards
RAhUL_hunk

Posted on Mar 10, 2009

  • 3 Answers

SOURCE: Electric aerial mazda 323 P reg

you shuld be able to take the inner plastics out of the boot then you should be able to get to iti have a mazda 323f m rege hatchback that was what i did! hope it works!!!!!!!!

Posted on Mar 26, 2009

yotaguy
  • 232 Answers

SOURCE: Mazda 323 automatic

It sounds like you need to service the transmission,new filter and fluid should clear up this problem.

Posted on May 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I connect vacuum and electric wiring for my Mazda 323 1996 carburetor? What is the diagram for properly connecting the carburetor to this 1996 Mazda 323?


You will require service manual for car, or the repair manual. Usually available at auto parts stores. Diagrams can be found on the web user browser search engine and " 1996 Mazda 323 Engine Fuel system diagram"

Mar 09, 2015 | Mazda Cars & Trucks

1 Answer

Maza 323 radiator fan rotating direction


the direction of fan rotation will be on the motor body but check that th curved edge ( leading edge) of the fan blade is facing the radiator and that air is being pulled through th radiator. THe motors are dc operation and can spin in both directions and the fans themselves are made to fit in front of the radiator( a/c fan) and blow air through the radiator. So checking these points is necessary

Jan 19, 2013 | Mazda 323 Cars & Trucks

1 Answer

2002 Mazda Milenia. Coolant level ok. In heavy traffic or at idle it runs on the hot side. Also my AC stops cooling


Troubleshoot your radiator fans. Could be the main one failed. The AC booster would have a hard time keeping engine and AC cool for more than a few mins.
Check the under hood electrical box. Fuse, relay. Possible the fan motor itself. Unplug it at the wire connector and jump 12 volts to it. No go, replace fan motor.

If this helps - Please vote.

Jul 27, 2011 | 2002 Mazda Millenia

2 Answers

Mazda 323 automatic


It sounds like you need to service the transmission,new filter and fluid should clear up this problem.

May 09, 2009 | 1986 Mazda 323

1 Answer

Correct direction of cooling fan


toward the engine, so as to pull air across the radiator.

Mar 30, 2009 | 2000 Mazda MPV

1 Answer

1994 Pontiac Sunbird LE Sedan radiator cooling fan not working.


57441307
Above is the diagram for a 4 cylinder. It appears that you might have a fusible link which looks like a regular wire instead of a regular fuse. If you have A/C on your car you can turn it on and this automatically should turn the cooling fan on. If I remember correctly these cars have problems with the Coolant temperature sensor located near the thermostat. It will have one yellow wire going to it. You can also try to swap the cooling fan relay with the horn relay or another relay that looks similar under the fuse block. There should be a diagram of the fuses and relays under the cover. Try with the engine off and key out try to turn the fan by hand. If it does not move freely the cooling fan motor is bad. Other than that you will have to bring to a shop to have the circuits tested... Good luck.

Jan 09, 2009 | 2004 Pontiac Grand Am

1 Answer

Timing settings


you may have forgotten to plug the fan sender unit in on the right side of the head if it is plugged in it may of failed witch is not uncommon.
as for the timing there is actually some small marks on the head it self and on the cam pulleys, also on the crank sprocket and the block if you cant find them i can send you a diagram.
if you can find the sender unit on the side of the head unplug it and earth out the plug with a split pin if the fans come on bingo get a new sender
good luck

Dec 09, 2008 | 1994 Mazda 323

1 Answer

Radiator fan dosn't work


ground the wire sensor and see if fan work if not change the relay, first check fues.

Nov 22, 2008 | 1993 Mazda 323

1 Answer

Fuse box diagram


yeh mate.. email me... tx3_turbo@hotmail.com, can send u the diagram

Aug 03, 2008 | 1986 Mazda 323

2 Answers

Mazda 323 1996 Alternator Wireing.


Hi,i am from greece and i want bigger front brakes for to my mazda 323c 1.3 cc 16v, mod.95. Can i use from another mazda model and which is that?

Jul 29, 2008 | 1986 Mazda 323

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

307 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...