Question about 1994 Ford Explorer Limited

1 Answer

I have a 94 Ford Explorer 4dr 2wd w/ac. When I

I have a 94 Ford Explorer 4dr 2wd w/ac. When I turn on the heater/defrost, there is a terrible grinding noise comming from the blower motor and when the fan speed switch is turned to high, there is very little air flow coming from any of the vents. Please adivse...

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 424 Answers

Remove the blower motor located under the hood on the passenger side in the evap. case. HEld in by 3 8mm screws. The fan blade may have broken .

Posted on Nov 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

00 FORD EXPLORER CAN NOT GET ANY HEAT ,IVE REPLACED THEROSTAT,RADIATOR,HEATER CONTROL VALVE AND A BLEND DOOR ACTUATOR HOSES ALSO FLUSHED HEATER CORE HOSES ON HTR CORE ARE GETTING HOT WHAT ELSE CAN I CHECK...


When you turn the heat on,is the blower putting out good wind speed.Do all the vents and defroster have good air flow.Does the A.C. blow with good air speed.

Jan 19, 2014 | Ford Cars & Trucks

1 Answer

When i turn on the windsheald defroster i hear a rattle in the engine


The ac compressor runs in defrost mode.
So the noise could be a belt tensioner or something involving the ac compressor pulley.

Feb 18, 2013 | 2001 Ford Escape

1 Answer

Heat AND AC ONLY COME OUT DEFROSTER NOT VENTS


you probably have a vacuum leak from the engine or vacuum storage canister to the heater/a/c control head. Defrost is default mode required by law when system fails.

Jul 28, 2011 | 1998 Ford Explorer

4 Answers

Does the 3.0l transmission fit on the 4.0l engine


Hiya,

There are 5 automatic transmissions used in the Ford Ranger, Explorer and Mountaineer. They may be identified by checking the transmission code on the Safety Standard Certification Label attached to the driver's side door post, in the space marked Trans. The transmissions can also be identified by a tag attached to the lower left hand extension attaching bolt. The transmission codes are as follows:
  • 1991–94 code T is for the A4LD transmission
  • 1995–99 code T is for the 4R44E (2.3L, 2.5L & 3.0L) or 4R55E (4.0L) transmission
  • 1996–99 code U is for the 4R70W (5.0L) transmission
  • 1997–99 code D is for the 5R55E (5-speed automatic) transmission
So, what you need to do now is...establish from a FORD workshop, whether both the A4LD and 4R55E transmissions share the same components and mounting dimensions.

Cheers,

Scott

Nov 12, 2009 | 1992 Ford Ranger

1 Answer

1997 explorer max ac switches between front and defroster vents


Check the vacuum hose going to the heater control valve,it may have popped off. If that is on. check the vacuum hose going to your recirculation door under the right side of your dash. I hope this helps.

Jun 09, 2009 | 1997 Ford Explorer AWD

1 Answer

Airbag light flashes 3 times then 6 times then stays on


This is for the driver's side air bag.
This may be due to a high resistance or poor connections in the side air bag (SAB) wiring harness circuits or restraints control module. This condition may occur on vehicles equipped with, or without, side air bags.
Ford has a Technical Service Bulletin out on this no. 03-24-1.
To service, install an overlay harness which incorporates soldered terminals and tin wiring. Refer to the service procedure for direction on which side air bag kit to order. Installation instructions and illustrations are included in the kit.
FOR VEHICLES WITHOUT THE (SAB), FOURTH DIGIT OF VIN IS "Y" OR "Z" :
  1. Install a new Non-SAB wire harness kit 3L2Z-14B455-AB. Refer to the installation instruction sheet included in the kit.
FOR VEHICLES EQUIPPED WITH (SAB), FOURTH DIGIT OF VIN IS "C" OR "D" :
  1. Install the appropriate harnesses as indicated below. Refer to the installation instruction sheet included in the kit.
    • 1999-2001 4DR Limited Explorer XL2Z-14B455-DB
    • 1999-2001 4DR Explorer (except Limited) and Mountaineer XL2Z-14B455-AC
    • 1999-2000 2DR Explorer XL2Z-14B455-BC
    • 2001 2DR Explorer 1L2Z-14B455-AC

Apr 17, 2009 | 1999 Ford Explorer

1 Answer

94 2d 2wd exp sport 4.0


I think they are called heater control valves. Haven't seen one of those since my 1958 Buick Super. I believe they turn off the water to the heater core when in AC mode. Good Luck!

Oct 16, 2008 | 1994 Ford Explorer Limited

Not finding what you are looking for?
1994 Ford Explorer Limited Logo

270 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...