Question about 1989 Yugo Hatchback

1 Answer

Hi where are the timeing marks on a 1.6 16v astra

Hi i cant find the cam timeing marks on a 1.6 16v astra

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Yugo Master
  • 22,246 Answers

Nice set of wheels ,cant remember since i done the last one?? right it either has locating lugs on the cam between the cam lobes on no1 ,or horizontal slots on back of cams ,or is that an escort ?' or 8mm hole in cam wheel that locks into the head with a drill bit or an bolt?' or was that VW .If not sure then both inlet and exhaust valves are closed and the valves on no4 open with cams on teh rock so to speak ,then look for the timing marks and next time bring engine to no1 and mark it with white paint

Posted on Nov 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Opel astra 1.4 cam timing marks


check that you have the timing right for no 1 piston as you may be 180 degrees out.

Jan 25, 2015 | Opel Cars & Trucks

1 Answer

I changed my timing belt on my 2002 1.6 ecotec opel astra cde. i got the timing belt marks wrong . how must the cam pulley marks be when i got the crank on tdc please.


remove the rocker cover and look on the ends of the cams ,their are slots and they align with the head ,i use my old spanner from my angle grinder its just about the right thickness ,lower pistons to the middle then set the cams ,make sure no1 the valves point up and outwards like a V victory sign then bring the no1 piston up to TDC ,i take the plug out and use a long thin screwdriver for this .then put the belt on

Dec 06, 2014 | Opel Cars & Trucks

1 Answer

Can i please have timing marks for opel astra 16 valve ecotech engine


cam?
or spark only
what displacement they have many, huge.........!!!!!
wiki this.
2000 Daewoo , and see just how complex the engines are. ouch.
yours is GM,

Sig: I must ask questions first, I'm blind, and my tools can't reach, dig?

Jun 21, 2014 | 2000 Daewoo Nubira

1 Answer

Do you know the marks for cambelt in a holden astra 2001. We thought we had it but now the whine won't fire up! Any suggestions??


hey mate.when you look at the cam gears you will see the timing marks like 2 lines carved in the gear.when setting the timing these 2 marks need to line up and look at each other.the intake cam mark should be at 3oclock and the exhaust at 9oclock.
use cam lock.

Sep 14, 2013 | Cars & Trucks

1 Answer

Cant find timing marks on camshaft sprockets on 91 olds cutlass supreme 3.4 doh. need diagram to line up marks


THE MARKS SHOULD BE MARKED AT THE OUTTER SURFACE OF THE CAM SPROCKETS THERES 4 TOTAL ON THE CAMS AND TWO ON THE CRANK. GOOD LUCK THIS PICTURE IS RIGHT OUT OF MY TIMING MARK BOOK......bc3b21f.jpg2

Jan 23, 2010 | 1991 Oldsmobile Cutlass Supreme

2 Answers

Hi need to know what timing marks to use when replacing cams


The timing marks to use are spot-drilled on the faces of the timing gears.
The timing marks on the camshaft gears must align side-by-side, and as closest as possible on the Toyota,Camry 2.2 engine.

Dec 20, 2009 | 1995 Toyota Camry

1 Answer

How to set the timing marks on vauxhall astra 1.4 when changing the cam belt


put the dot on cam gears in between 2 dots on engine case. crank needs to be at TDC

Oct 18, 2009 | 2003 Nissan Altima

1 Answer

Need timing marks


crank shaft mark is a 8mm bolt in flywheel through bellhousing and cams is the flat on the on the end of the cam that has to be horizontial with the head

Jul 16, 2009 | 2000 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yugo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Berlyn Reed
Berlyn Reed

Level 3 Expert

486 Answers

Sam Akber
Sam Akber

Level 3 Expert

987 Answers

Are you a Yugo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...