Question about 1992 Subaru Legacy

1 Answer

Where is the thermostat located on 92 legacy - 1992 Subaru Legacy

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 377 Answers

The thermostat is located under the engine Follow the lower hose from where it attaches to the engine. Be careful with the bolts, use penetrating oil, you do not want to break one. Try to use a Subaru thermostat and gasket-- expensive, but cheaper than an overheated engine, most places do not stock the required thermostat, being an oddball temperatiue (167F), putting in a "regular 195F" thermostat WILL cook your engine. The gasket is really an O-ring affair-- it works nicely. Try not to re-use the old O ring gasket.

Posted on Nov 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 92' subaru legacy is over heating and stalling when stoped?


Have the radiator flushed and replace the thermostat.

Apr 25, 2010 | 1992 Subaru Legacy

1 Answer

Whwerwe is the thermostat located on a 2002 subaru


It is where the lower radiator hose attaches to the water pump. You do have to drain the fluid to replace the thermostat. Good luck and have a great day.

Feb 08, 2010 | 2002 Subaru Legacy

1 Answer

Where is Thermostat located on 1992 Subaru Legacy Turbo?


Follow the top rad hose to the engine, it is the where the top hose clips onto the block, that is the thermostat housing, stat inside.

Nov 21, 2009 | 1996 Subaru Legacy

1 Answer

92 subaru legacy wagon engine surges while


pay close attention to the fuel filter as this is a common symptom and sign of blockage and poor fuel delivery....replace fuel filter

Sep 15, 2009 | 1992 Subaru Legacy

1 Answer

Where is the oil filter located on a 92' subaru Legacy


There should be a plastic or metal skid plate take it off and there should be your filter should be easy to see from this point.

Jul 31, 2009 | 1992 Subaru Legacy

1 Answer

92 2.2 Legacy 4d AWD Auto No heater operational, even tho temp


Have you checked the compression? Possible head gasket leak. A head gasket leak does not always contaminate the oil. Sometimes you can remove the plugs and check to see if one is not firing right or is wet. Good luck hope this helps and have a good day.

Jun 22, 2009 | 1992 Subaru Legacy

1 Answer

I dont know where my thermostat is in my 92 subaru legacy, but i think theirs something wrong with it. I have a brand new adiator, but my car is overheating still?


The thermostat is mounted low down on the bottom of the engine where the large radiator hose connects to the radiator. The housing is bolted to the engine block and the thermostat is inside. Don't attempt to replace it unless the engine is cold otherwise you will burn your hands. Make sure you bleed all of the air out of the system before driving off.

Apr 05, 2009 | 1992 Subaru Legacy

3 Answers

92 Subaru Legacy Power Windows Don't Work


I have a 92 that did the same. After checking fuses and the relay(located under drivers seat) I discovered that the power windows control module on drivers door was bad. Went to a salvage and bought a used for $40, pulled the door panel, unscrewed and unplugged the old one, put in the used one and everything worked fine. About a week later, the passenger side motor went out and replaced that with a used power window motor. All windows now work fine.

Jan 17, 2009 | 1992 Subaru Legacy

1 Answer

Legacy gt 92 single turbo clutch adjustment


Only clutch adjustment is at the pedal as they are hydraulic. Clutch may be worn, cheers

Aug 01, 2008 | 1992 Subaru Legacy

Not finding what you are looking for?
1992 Subaru Legacy Logo

Related Topics:

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...