Question about Hyundai Elantra

1 Answer

I own a 99 hyundai elantra the car has a very bad grinding/vibration in the frontend the drive axeles were already replaced when i bought the car i checked the wheel bearings they seem to be fine so i changed the trans but noise is still there can someone please help ?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 855 Answers

You should check your wheel bearings again and check the front brakes and rotors. Pay close attention to the inner pads and the rotors. You can get a grinding vibration from hard spots in the rotors or the pads and these are often overlooked as a cause. Everyone goes to bearings or trans first, so it is not you everyone does it I've seen it happen for years. But pay close attention to the brakes, worn, hard spots or heat/burn marks all can cause this to happen.

Posted on Nov 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix cv axels on a 2002 hyundai accent


It's not worth it to fix the axel, it is wise to replace the axels
by jacking up the car secure the car with jack stands, then remove the wheels, the big center nut of the axel and the lower bolts on the ball joint, then pry the lower control arm down and pull the hubb aside. Now u could remove the axel easily, if stuck take a hammer and tap it lightly, remove it, replace with the new but make sure both ends r lubed with grease.

Feb 21, 2015 | Hyundai Accent Cars & Trucks

1 Answer

Vibration on elantra 2005


check for a weak or broken engine mount. most likely the one on the right side of the engine has gone bad.

Jun 14, 2012 | 2005 Hyundai Elantra 1.6

1 Answer

My 2003 Ford Focus started making a grinding noise when in reverse and in right turns. After driving about 20 miles the symptoms disappeared. The symptoms have gotten progressively worse, vibration and...


Check the front engine mount..If its bad it could make a noise while turning or reverse..Hold the car in gear with your foot on the brake and carefully raise the engine ..do it in both reverse or forward and look for excessive movement..

Sep 22, 2011 | 2003 Ford Focus

1 Answer

I have a 2002 hyundai elantra and I need to change the driveaxel seal. Any one know how to change it


u have to remove wheel and lower ball join nut from nukole and nut from drive shaft from midle of hub then remove axel and seal

Nov 10, 2009 | 2001 Hyundai Elantra

1 Answer

I need help with Axles for 2001 Hyundai Elantra. The Left Axle rubber cover is broken, also I heard noise when the wheel moves iether left or right turn when the car is leaving or entering a parking box....


depending on how bad the axels are. you could buy new ones. or you can buy a rebuild kit. now for the leak just 1 seal but if your gonna remove both axels i suggest buyin both side seals.

Jul 22, 2009 | 2001 Hyundai Elantra

1 Answer

, battery loses its charge, grinding noise


it sound like your alternater has gone bad. and your trany is bad you will have to replace it

Jun 11, 2009 | 2000 Hyundai Elantra

1 Answer

'99 Elantra stalls while driving


best to put it on the diagnostics, it could be the auto chock that kicks in it just thinks the engine is cold,

Jun 05, 2009 | Hyundai Motor 1999 Elantra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...