Question about 2003 Hyundai Tiburon

1 Answer

No power in 4 and 5 gear wear is fuel filter - 2003 Hyundai Tiburon

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 215 Answers

A lot of vehicle have the fuel filter located under the seating area under the car, check both sides, if you still do not see it located the gas tank and then trace the fuel lines forward and this will lead you to the fuel filter.

Posted on Nov 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 98 Chevy blazor 4.3 4x4 it has no power and sputters change fuel filter,mass air sensor,o2 sensor,plugs,wires,cap,rotor,module on desributer check fuel pump psi at 55 to 57 the only code random...


Pull the distributor. Check the gear on the bottom of it. Replace a bunch of them for wear. Causes no power and bad timing. Depending on wear. Replace the gear or the distributor.

Nov 08, 2014 | 1998 Chevrolet Blazer

1 Answer

My ford 1994 Festiva struggles to take off in 1-2nd gears and I have no idea what the problem is as its my first car a friend told me it could be spark plugs or fuel filter?? Please help


How does it feel in 3-4-5 gears? Good power? Fuel filter and spark problems are usually prevalent in all gears especially higher ones. How is going up hills? Get back to me and maybe I could help.

Dec 31, 2013 | Cars & Trucks

1 Answer

How do I replace the Fuel Filter on my 1996 Ford Escort lx?


Check this guido for Replace a Fuel Filter...

Parts:
1. Fuel Filter

Tools:
1. 3/8 in. Drive Ratchet
2. Hose Pincher
3. Flare Nut Wrench
4. Flat Head Screwdriver
5. Socket Set

Steps:
Step 1 Open the hood and locate the fuel filter. If the fuel filter is not in the engine compartment, follow the fuel line from the tank until the fuel filter is located.
o Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.

Step 2 If the fuel filter has a clear case, inspect the filter element for dirt.

Step 3 If the fuel filter case is not see-through, remove it from the fuel line. Drain the fuel from the filter into a container and inspect the condition of the fuel.
o Tip: Caution: Before removing fuel lines or fuel related parts, make sure that the fuel pressure is relieved from the vehicle fuel system. To relieve the pressure in fuel injected systems, remove the fuel pump fuse and run the engine.

Step 4 Install the new fuel filter making sure that the flow is in the correct direction. The arrow on the fuel filter is the direction of flow from the tank to the engine.

Step 5 Secure the lines back onto the fuel filter. If applicable, reinstall the fuel pump fuse.

Step 6 Start the engine and check for fuel leaks.

Step 7 Test drive the vehicle to check for a rough running engine, hesitation, or lack of power.


Hope helps (remember rated this).

Jul 04, 2010 | Cars & Trucks

3 Answers

What do I need to do to replace a fuel filter in a '89 mercury cougar LS V6?


The filter is bolted to the frame, held on with a large worm gear clamp. There are 2 U shaped plastic clips that keep the hoses connected to the filter. Remove the clips and wiggle the lines off. Watch for gasoline coming out the filter. You might want to start the car and unplug the fuel pump fuse to relieve the fuel pressure.

Apr 28, 2010 | 1989 Mercury Cougar

1 Answer

How to change fuel filter ford free star 2007


Direct fit OE replacement fuel filter.

135d2d0.jpg



How to Replace a Fuel Filter (DIY Complexity: Moderate / Time: 1.4 hours)

Parts:
1. Fuel Filter

Tools:
1. 3/8 in. Drive Ratchet
2. Hose Pincher
3. Flare Nut Wrench
4. Flat Head Screwdriver
5. Socket Set

Steps:
Step 1 Open the hood and locate the fuel filter. If the fuel filter is not in the engine compartment, follow the fuel line from the tank until the fuel filter is located.
o Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.

Step 2 If the fuel filter has a clear case, inspect the filter element for dirt.

Step 3 If the fuel filter case is not see-through, remove it from the fuel line. Drain the fuel from the filter into a container and inspect the condition of the fuel.
o Tip: Caution: Before removing fuel lines or fuel related parts, make sure that the fuel pressure is relieved from the vehicle fuel system. To relieve the pressure in fuel injected systems, remove the fuel pump fuse and run the engine.

Step 4 Install the new fuel filter making sure that the flow is in the correct direction. The arrow on the fuel filter is the direction of flow from the tank to the engine.

Step 5 Secure the lines back onto the fuel filter. If applicable, reinstall the fuel pump fuse.

Step 6 Start the engine and check for fuel leaks.

Step 7 Test drive the vehicle to check for a rough running engine, hesitation, or lack of power.


HOpe this helped.

Apr 10, 2010 | 2007 Ford Freestar Limited Minivan

1 Answer

Where is a fuel filter located in a 1994 toyota camry, and what are the steps to replacing it?


1994 Toyota Camry 3.0L EFI DOHC 6cyl
The Fuel Filter is located under hood, driver side, front side of strut tower, mounted on fenderwell in fuel line.

How to Replace a Fuel Filter
(DIY Complexity: Moderate / Time: 1.4 hours)

Parts:
1. Fuel Filter

Tools:
1. 3/8 in. Drive Ratchet
2. Hose Pincher
3. Flare Nut Wrench
4. Flat Head Screwdriver
5. Socket Set

Steps:
Step 1 Open the hood and locate the fuel filter. If the fuel filter is not in the engine compartment, follow the fuel line from the tank until the fuel filter is located.
o Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.

Step 2 If the fuel filter has a clear case, inspect the filter element for dirt.

Step 3 If the fuel filter case is not see-through, remove it from the fuel line. Drain the fuel from the filter into a container and inspect the condition of the fuel.
o Tip: Caution: Before removing fuel lines or fuel related parts, make sure that the fuel pressure is relieved from the vehicle fuel system. To relieve the pressure in fuel injected systems, remove the fuel pump fuse and run the engine.

Step 4 Install the new fuel filter making sure that the flow is in the correct direction. The arrow on the fuel filter is the direction of flow from the tank to the engine.

Step 5 Secure the lines back onto the fuel filter. If applicable, reinstall the fuel pump fuse.

Step 6 Start the engine and check for fuel leaks.

Step 7 Test drive the vehicle to check for a rough running engine, hesitation, or lack of power.


Hope this help (remember rated this).

Mar 25, 2010 | 1994 Toyota Camry

1 Answer

Need to change fuel filter


2008 Pontiac G5
2008: Base; 4 Cyl 2.2L; "GAS, FI, L61, VIN F" 2008: GT; 4 Cyl 2.4L; "GAS, FI, VIN B"

c9daaad.jpg

How to Replace a Fuel Filter
(DIY Complexity: Moderate / Time: 1.4 hours)

Parts:
1. Fuel Filter

Tools:
1. 3/8 in. Drive Ratchet
2. Hose Pincher
3. Flare Nut Wrench
4. Flat Head Screwdriver
5. Socket Set

Steps:
Step 1 Open the hood and locate the fuel filter. If the fuel filter is not in the engine compartment, follow the fuel line from the tank until the fuel filter is located.
o Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.

Step 2 If the fuel filter has a clear case, inspect the filter element for dirt.

Step 3 If the fuel filter case is not see-through, remove it from the fuel line. Drain the fuel from the filter into a container and inspect the condition of the fuel.
o Tip: Caution: Before removing fuel lines or fuel related parts, make sure that the fuel pressure is relieved from the vehicle fuel system. To relieve the pressure in fuel injected systems, remove the fuel pump fuse and run the engine.

Step 4 Install the new fuel filter making sure that the flow is in the correct direction. The arrow on the fuel filter is the direction of flow from the tank to the engine.

Step 5 Secure the lines back onto the fuel filter. If applicable, reinstall the fuel pump fuse.

Step 6 Start the engine and check for fuel leaks.

Step 7 Test drive the vehicle to check for a rough running engine, hesitation, or lack of power.

Hope help with this.

Mar 12, 2010 | 2008 Pontiac G5

1 Answer

How do I replace the fuel filter in my 1997 rodeo?


Isuzu Rodeo - How to Replace a Fuel Filter
( DIY Complexity: Moderate / Time: 1.4 hours)

Parts:
1. Fuel Filter - $8.40

7e59050.jpg

Tools:
1. 3/8 in. Drive Ratchet
2. Hose Pincher
3. Flare Nut Wrench
4. Flat Head Screwdriver
5. Socket Set

Steps:
Step 1 * Open the hood and locate the fuel filter. If the fuel filter is not in the engine compartment, follow the fuel line from the tank until the fuel filter is located.
o Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.

Step 2 * If the fuel filter has a clear case, inspect the filter element for dirt.

Step 3 * If the fuel filter case is not see-through, remove it from the fuel line. Drain the fuel from the filter into a container and inspect the condition of the fuel.
o Tip: Caution: Before removing fuel lines or fuel related parts, make sure that the fuel pressure is relieved from the vehicle fuel system. To relieve the pressure in fuel injected systems, remove the fuel pump fuse and run the engine.

Step 4 * Install the new fuel filter making sure that the flow is in the correct direction. The arrow on the fuel filter is the direction of flow from the tank to the engine.

Step 5 * Secure the lines back onto the fuel filter. If applicable, reinstall the fuel pump fuse.

Step 6 * Start the engine and check for fuel leaks.

Step 7 * Test drive the vehicle to check for a rough running engine, hesitation, or lack of power.


I really hope help with this (remember rated and comment this help).

Mar 10, 2010 | 1997 Isuzu Rodeo

2 Answers

Have 2005 Grand Cherokee, had oil changed as usual every 3000 miles they recommended a fuel induction service, rear differential service and power steering flush are these needed or what vehicle has 51000...


Most of that is not scheduled maintenance items. I would have your fuel filter replaced, if not done yet, it should be done every 20,000 miles. Alot of these places get a small commission for selling added services. I would go by the maintenance schedule in your owners manual.

Mar 08, 2010 | 2005 Jeep Grand Cherokee

1 Answer

Change fuel filter on a 2006 Saturn Vue. V4.


How to Replace a Fuel Filter
DIY & Save up to $123.86 (Complexity: Moderate / Time: 1.4 hours)

Parts:
1. Fuel Filter - $115.14

Tools:
1. 3/8 in. Drive Ratchet - $7.55
2. Hose Pincher - $5.84
3. Flare Nut Wrench - $5.53
4. Flat Head Screwdriver - $3.14
5. Socket Set

Steps:
Step 1
Open the hood and locate the fuel filter. If the fuel filter is not in the engine compartment, follow the fuel line from the tank until the fuel filter is located.
- Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.

Step 2
If the fuel filter has a clear case, inspect the filter element for dirt.

Step 3
If the fuel filter case is not see-through, remove it from the fuel line. Drain the fuel from the filter into a container and inspect the condition of the fuel.
- Tip: Caution: Before removing fuel lines or fuel related parts, make sure that the fuel pressure is relieved from the vehicle fuel system. To relieve the pressure in fuel injected systems, remove the fuel pump fuse and run the engine.

Step 4
Install the new fuel filter making sure that the flow is in the correct direction. The arrow on the fuel filter is the direction of flow from the tank to the engine.

Step 5
Secure the lines back onto the fuel filter. If applicable, reinstall the fuel pump fuse.

Step 6
Start the engine and check for fuel leaks.

Step 7
Test drive the vehicle to check for a rough running engine, hesitation, or lack of power.


Hope thats help (remember rated this help). Good luck.

Feb 09, 2010 | 2006 Saturn Vue

Not finding what you are looking for?
2003 Hyundai Tiburon Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...