Question about 2005 Hyundai Santa Fe

3 Answers

2001 Santa Fe Key fob Programming

Is it possible to program my 2001 Santa Fe Key fob without going to dealer and spending $42 for three minutes of work?

Posted by on

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Hyundai Expert
  • 262 Answers

Change the batteries then start the car and close it and press the key it should work

Posted on Nov 15, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

1 Find black box immediately behind fuse panel on left of panel under steering whee l. The black box approx. 5" x 3" has a "off/set" switch at the right rear of the box. May need to move wire harness to see.the switch.( It's easier to remove the knee pannel. First remove the interior dimmer control and housing by prying out with small blade screwdriver; then remove electric connection, set aside. Next remove three phillips screws and pull knee panel toward you).
2. Leave key out of ignition, it does not need to be on. Remove clear tape from "off/set" switch. Switch toggle to "set" with pick or small screwdriver.
3. Push "lock" on new remote(s) up to two. You will see little red led light on remote blink. You will hear nothing.
4. Move "off/set" toggl back to "off".
5. Test remote(s) It worked today 9/24/14 on my 2002 Santa Fe.
6. Replace knee panel and dimmer control unit.

Posted on Sep 24, 2014

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Some a picser ofthe code po450

Posted on Oct 14, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4x4 diesel. Why can't doors be unlocked or locked?


their is a way to do it but recheck battery first sometimes the relearn process doesnt work or the fob itself is dead also if auto /remote start will need dealer to flash fob ---- 2002 santa fe and followed programming instructions and eventually was able to program the new remote. But, I did not realize I had to program my existing remote at the same time. Since, I have retried programming both remotes many times with no success--the new one works, but the old one won't. The instructions were: 1) Locate switch under dash, behind fuse box; 2) Turn ignition switch on, but don't start engine; 3) Wait 5 seconds, set memory switch to SET position; 4) Press remote LOCK button; press second remote transmitter LOCK button; 5) Set memory switch to OFF; 6) Switch ignition OFF. 7) Confirm programming by locking and unlocking vehicle.
Remote Key Programming Hyundai Forums Hyundai Forum

Sep 23, 2015 | 2003 Hyundai Santa Fe

1 Answer

Program new key fob for Cadillac cts 2003


There are several methods of doing this - but your 2003 requires that you either go to the dealer for them to add a FOB with special equipment (ask if they'll do it for free - can't hurt). If you have time to kill, you can do it yourself with Method 3 as described and found at:

Key Fob Reprogramming General Cadillac Forums

Method 3 - Key Fob Auto Learn


This procedure will first erase all known key fobs. The procedure will then program a single or multiple key fobs. Method 3 is a series of three 10-minute key cycles, for a total of 30 minutes. This procedure requires that you have a replacement key fob and the vehicle mechanical key.

Important: All previously programmed key fobs will be erased upon completion of the 30-minute programming procedure. The order in which the key fobs are programmed will determine its numbering position within the RCDLR memory. The first key fob programmed will be key fob #1, and the second key fob programmed will be key fob #2. The number stamped on the key fob case is for reference only: #2 can be programmed as #1.
Do not place any known good key fobs in the vicinity of the vehicle when programming with Method 3. If the RCDLR recognizes a known good key fob during Method 3 programming, the programming mode will resort to Method 1.


The vehicle must be OFF.
Place the replacement key fob in the console pocket with the buttons facing forward.
Insert the vehicle key in the driver door lock cylinder located in the driver door handle and cycle the key 5 times within 5 seconds.
The DIC will display a message: OFF/ACC TO LEARN.
Press the OFF/ACC portion of the ignition button.
The DIC will display a message: WAIT 10 MINUTES, then it will count down from 10 to 0, one minute at a time.
When the counter reaches 0, DIC will display OFF/ACC TO LEARN.
Repeat steps 5-7 two more times, for a total of 30 minutes.
The DIC will display a message: OFF/ACC TO LEARN.
Press the OFF/ACC portion of the ignition button.
A beep will occur and the DIC will display: READY FOR FOB 1. At this time all previously known key fobs have been erased. When fob 1 is programmed a beep will be heard and the DIC will display a message: READY FOR FOB 2.
Additional key fobs can be programmed by taking fob 1 out of the pocket and inserting fob 2. If desired, up to 4 fobs can be programmed. Once 4 fobs have been learned, the DIC will display a message: MAX FOBS LEARNED, and automatically exit the program mode.
If learning less than 4 key fobs, press the OFF/ACC portion of the ignition button to exit the program mode.
Operate the active portion of each key fob in order to finalize the programming sequence and verify correct system operation.

Good luck!

Feb 25, 2015 | 2003 Cadillac CTS

1 Answer

How to program a keyless fob for 2001 cadillac deville


Unfortunately, the website I found says there is no on-board method of programming your car for a new key-fob. You have to take the car to a dealer or to a key-maker (who may only charge half as much as the dealer)

Key Fob Remote Programming Instructions 2001 Cadillac Deville Key Fob...

Feb 22, 2015 | 2001 Cadillac DeVille

2 Answers

How to program key fob for 2011 hyundai santa fe


Nonsense. I just programmed a new remote start fob on my 2011 Santa Fee limited and it worked just great. Follow the steps below and see what happens.
1. Open the drivers side door
2. Turn the Vehicle ignition to the ON position (Do not start the vehicle)
3. Locate the disarm/program button. (look closely, it is located on the wiring harness just inside the lower dash. it could be located just inside the fuse cover.)
4. Press and hold the disarm/programming button for 10 to 15 sewconds, the horm will beep 3 times. Release the disarm/programming button.
5. On the fob, press the Find/Panic button One time and the horn will beep one time.
6. Turn off vehicle ignition. (YOUR DONE)

Jun 08, 2012 | 2011 Hyundai Santa Fe

1 Answer

Need to program key fob for santa fe 2011


you have to take it to the dealer and get it programmed with there computer. there is no other way to do so. sorry

Jun 08, 2012 | 2011 Hyundai Santa Fe

1 Answer

Trying to re program my key fob


A special tool (electronic box) is required to program key fobs on early model Hyundai vehicles. Check with your nearest Hyundai Service Department & arrange for key fob programming/reprogramming.

Sep 01, 2011 | 2005 Hyundai Santa Fe

1 Answer

How do I reprogram the key fob on my 2005 Hyundai Santa Fe without having to pay the fee at the dealership?


Well, you basically have only 3 choices:
1. Pay the fee at the dealership
2. Purchase the high-dollar equipment that is required to perform the programming procedure
3. Forget about adding another key fob to tor vehicle.

TECHNICAL SERVICE BULLETIN

Group
90 - ELECTRICAL

Number
03-90-020

Date
October, 2003

Model
Elantra 2001-2004, Santa Fe 2001-2004, Sonata 2002-2004, Tiburon 2003-2004, XG(NNN) NNN-NNNNand XG(NNN) NNN-NNNN2004

Subject
SECURITY SYSTEM KEYLESS ADAPTER CABLE

This bulletin supersedes TSB # XXXXX
DESCRIPTION:
The security system keyless adapter cable (SPX/Kent-Moore P/N 09900-21300) is a special service tool (SST) that is used for programming new keyless entry remote transmitters to the factory security systems. The keyless adapter is used in conjunction with the Hi-Scan Pro (with Hi-Scan SOL Pro Software Version 09-29-03 or newer) and Data Link Connector (DLC) Cable.
SERVICE INFORMATION:
The keyless adapter cable can be used on the following vehicles:
^ 2001 -2004 Elantra
^ 2001-2004 SantaFe
^ 2002 - 2004 Sonata


Apr 24, 2011 | 2005 Hyundai Santa Fe

1 Answer

I just bought a 2004 hyundai santa fe but it only came with 1 key & 1 remote , how can i obtain a duplicate of both & what would it cost me?


Most locksmiths, key cutters can duplicate another key for you. To get another key fob(remote), you will have to go to a Hyundai Dealer. The remote will also have to be programmed along with the remote you have now. Costs vary.

Jan 11, 2010 | 2004 Hyundai Santa Fe

1 Answer

Where is the program switch on the Santa Fe TD


Usually can only be done by the dealer

Aug 26, 2009 | 2003 Hyundai Santa Fe

1 Answer

Program key for 02 santa fe


if you are talking about the fob it has to be programmed with hyundai scan tool

Feb 08, 2009 | 2003 Hyundai Santa Fe

Not finding what you are looking for?
Cars & Trucks Logo

1,245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...