Question about 2004 Jeep Grand Cherokee
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I have a 2000 Jeep Grand Cherokee the power windows,power seat , door would not lock , and the inside lights would stay one ..i thought it was a fuse problem but no fuses for that ... in the rubber boot between the door and frame ..the was the ground wire was split ... put a **** connector on it everything works great now ....
Posted on Aug 25, 2008
You need to remove all the skrews from the door. Normaly there is one in the handle of the door, one behind the in door lach handel and one under the bump out for the arm rest on the door. Than you need to take a flat head skrew driver slowly priying the panel off. There are plastic clips on the backside of the panel it is ok if you brake a few.
Posted on May 01, 2009
SOUNDS LIKE YOU HAVE BROKEN WIRES BETWEEN DRIVER'S DOOR AND BODY AT A PILLAR..PULL RUBBER BOOT FROM BODY AND DOOR AND INSPECT WIRING HERE
Posted on Jun 21, 2009
I have the same problem. Do not know cause but I remove large red 50 fuse in engine compartment fuse box, wait 15 sec and replace. Lock car and unlock. This seams to reset something and car is fine. This problems seams to appear when my battery is low.(?)
Posted on Oct 29, 2009
SOURCE: 2007 jeep Cherokee wont start.
It could still be the battery....It may not be strong enough to start it but you will still have enough to operate windows and radio....It doesnt take much power for radio....or windows Unless you move the windows constantly then it will run battery down quick.....Check battery voltage and battery connections...Also jeeps have a ASD relay which means AUTOMATIC SHUT DOWN...This could be a bad relay.........This is under hood at fuse Power Block Box.....This could of course be the starter also...Check wiring connected to starter....Sometimes it will vibrate loose and it will do nothing....And the crank sensor will cause it not to start....It is on the passenger side of engine block under and at back of engine ...You cant miss it if you can get under it.....It has another relay the same size as the ASD relay...You can test the ASD relay by switching the two and this will tell you if the ASD relay is blown...If this doesnt change anything and still wont start it is not the relay.
I am chrysler tech and have jeep manuals.......I can help you through this....I need engine size and exact problem....Does it turn over at all ?..How many miles on it ?..And does the dash lights and gauges operate when you turn the switch on like normal...?..Make sure it is in park and your foot is on the brake while turning it over.............................................Metalpoet
Posted on Mar 07, 2011
Tips for a great answer:
Oct 27, 2015 | 2002 Jeep Grand Cherokee
Jul 08, 2014 | Jeep Grand Cars & Trucks
Jul 05, 2009 | 1999 Jeep Grand Cherokee
Mar 14, 2009 | 1999 Jeep Grand Cherokee
Mar 08, 2009 | 1999 Jeep Grand Cherokee
Jan 26, 2009 | 1996 Jeep Grand Cherokee
Dec 28, 2008 | 1999 Jeep Grand Cherokee
94 people viewed this question
Usually answered in minutes!