Question about Mitsubishi Endeavor

1 Answer

How do I adjust the timing on a Mitsubishi triton 1996 ? I have just put in a new head. I can´t get the adjustment right. When I try to start it wount start. I need a work manual book. Is it possible to find / get one over the internet.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 561 Answers

The Mitsubishi Triton is also known as the L200 try looking for manuals for L200 for 1996 year.
Manuals from Haynes of the UK or Chilton are some of the best.

Haynes manual shogun and l200
Book No: document.write(BookNo)1944 ISBN: document.write(ISBN)9781850109440
in the usa for petrol engined cars
Book No: document.write(BookNo)68040 ISBN: document.write(ISBN)9781563921926
Chilton manual also for petrol engines
Book No: document.write(BookNo)C50500 ISBN: document.write(ISBN)9780801986666 presently available at for around $23-27 each. just put in the ISBN number in the search window at amazon to find.

Posted on Nov 14, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

No start after new cylinder heads and timing belt

Recheck your timing you might have it 180 out

Apr 26, 2014 | 2001 Mitsubishi Montero

1 Answer

2.0 turbo

Any chance the timing is actually 180 degrees off ?
The obvious answer is the valves are not closing at the right time. That is assuming the head gasket is torqued and you have no cylinder leaks in the block.

May 29, 2013 | 1996 Mitsubishi Eclipse

1 Answer

I have a 1996 lance with a 4G15 engine that carries an Asian carburetor,i have tryed everything to stop it from running on after i turn of the ignition which it does sometimes ,i have even change the...

1) Warm up engine first(run 5-10 mins)

2)Shut off engine

3) Back out on the idle speed screw until it justt doesn\'t touch the throttle linkage. Then screw it in back about 11 turns

4) Screw in the A/F mixture screw until it stops(do not force tighten)

5) Screw out the A/F mixture screw 2 full turns

6) Start the car. It will run like its choking. As long as it\'s running it\'s ok.

7) Now turn in the A/F screw until engine dies. If this happens, turn
out the A.F screw half turn at a time to bring it back. (try to start
the car of coz)

8)Continue to turn out the A/F screw at half turns every 3 seconds.
Engine will pick up speed. Continue to screw out until the point engine
runs worse. When that happens screw back in half turn every 3 secs to
the point engine runs smoothest.(do this by ear or watch engine

9) Now set the idle speed. Go on the air conditioner. Watch the
tachometer. Turn in the idle speed screw until rpm is around 900 to 1000

10) Now it\'s ready to rumble..

Jan 08, 2011 | 1992 Mitsubishi Mirage

3 Answers

My Mitsubishi triton ute is breaking down mid way through rev ran

hi i have the same problem with my 89 triton and changed the head and everything you have did you work it out .i heard the carbys are notorious for stuffin up

May 02, 2010 | 1989 Mitsubishi Starion

1 Answer


This is a complex job. You could try and get the Hanyes manual. Because, if you make a bad adjustment, the engine is totalled!

In the meantime, you put in a new timing-belt, water-pump, and torque the head. The Crank-pulley and the cam-sproket must be lined up in proper positions. That's why you need a good manual.

Oct 29, 2009 | 1997 Mitsubishi Eclipse

3 Answers

Mitsubishi triton 1988 wont start

Check the compression using a compression tester you can buy at a parts store. The compression has to be fairly high in all cylinders to start up the engine. If not you may have bad rings . Check plugs and wires too.

Apr 05, 2009 | 1988 Mitsubishi Pickup

2 Answers


Yes the coil does have to be bolted down to stay running but it still should fire.Think maybe you have the cam sensor not timed right or the distributor time right?Try and turn the distributor in different positions to see if maybe that s the cause..If it starts to back fire or buck or run slow the timing may be of..That would be the first to check..

Mar 30, 2009 | 1996 Ford Thunderbird LX

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

552 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides