Question about 2004 Jeep Grand Cherokee
Take it to a mechanic....;) I have a 2003 jeep grand cherokee 4 wheel drive V8. there probably is not much difference between year models. frist thing remove the back tire you will see the caliper and rotor. check the rotor if it has deep groves on the front or back you will need to bring it in to have it turned or replaced if it is still smooth it should be ok. remove the caliper by taking the two bolts off the back of the caliper. using a pice of wire hang the caliper so it isn't dangling from the brake line. Now is the time to replace rotor if needed .Get a pair of vice grips crimp off the brake line so any trash in the caliper doesn't get into the brake system (if you let the contaminants get into the brake system it can cause costly repairs to the abs system). open up the bleeder valve most of the time close to where the brake line goes into the caliper and usually has a rubber cap. open bleeder valve, take a c-clamp place on inner brake pad and outside of caliper tighten until caliper is all of the way open close bleeder valve. replace brake pads put caliper back on recommend using lock tight on bolts holding caliper on snug fasteners but do not over tighten, lock tight will keep bolts from backing out. do the other side the same way. pull up emergency brake to and pump brake pedal to adjust brakes. bleed brakes and you are done
Posted on Nov 15, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: brake pads specifications
I just searched google and looked at JC Whitney. They have brake parts and ship internationally. (don't know cost) But it's worth looking into!
Posted on Apr 30, 2009
first put the car on jack stands secure the front tires so it does not roll second take the bolts out behind the caliper and once off you will be able to remove the old pads; keep one to use to press the cylinder back in using a "C" clamp so you can put the new ones on also remove a little of the brake fluid from the master cylinder before doing this so you do not damage the check valve and once everything is back together be sure to put brake fluid back in and pump the brakes before driving and if needed for additional information try www.autozone.com to see if your vehicle is listed
Posted on May 02, 2009
Tips for a great answer:
Sep 12, 2010 | 1997 Jeep Grand Cherokee
Sep 11, 2010 | Jeep Grand Cherokee Cars & Trucks
Sep 08, 2010 | 1997 Jeep Grand Cherokee
Dec 16, 2009 | 1989 Jeep Cherokee
Sep 22, 2009 | 2005 Jeep Grand Cherokee
Aug 11, 2009 | 1999 Jeep Grand Cherokee
Jul 26, 2009 | 2004 Jeep Grand Cherokee
May 02, 2009 | 2004 Jeep Grand Cherokee
3,842 people viewed this question
Usually answered in minutes!