Question about 2000 Isuzu Rodeo

1 Answer

Turn ignition switch on, sometimes it starts, sometimes it don't

Posted by on

  • Bill Schilz
    Bill Schilz May 11, 2010

    Do you hear a clicking sound when it doesn't start?

  • Rob Sinpasit May 11, 2010

    do you mean the engine turn over and it will not run or sometime it run sometime it dont

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,056 Answers

If it just click sometimes, and wont crank. then the starter solenoid is bad. Isuzu are notorious for these type of problem.

Posted on Nov 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Atos ignition problems and screeching


If you hear a click under the hood from the starter the starter solenoid but starter is defective and you should rebuild it. If that is not the case I would replace the ignition starter switch, this is the electrical switch the key cylinder actuates to turn on the electrical system and engage the starter.

Apr 21, 2017 | Hyundai Motor S Cars & Trucks

1 Answer

My 1998 grand voyager sometimes will not turn over . if i turn the key and don't hear the fuel pump it will not turn over if i turn the key on and hear the fuel pump it will start


did your car come equipped with prolock? prolock starter kill can become defective and prevent your car from starting. or it can be your ignition switch. I had a defective ignition switch and the van 's fuel pump would turn on but no start...

Apr 02, 2013 | 1998 Plymouth Grand Voyager

1 Answer

I changed the fuel pump.if I turn the key there times it comes on another there times it want.it will try to start but want.when turning the key also sometime it will try to crank sometimes the truck will...


I don't know if Yukon's had this problem or not, but once I changed a fuel pump on a Chevrolet Blazer only to find out that then the ignition switch went bad. I changed out the ignition switch and it started fine after that. Please rate my answer so I get my points for it.

Jan 22, 2012 | 1995 GMC Yukon

1 Answer

Ignition switch will not activate starter motor consistently. Sometimes no, sometimes with a second click of key. Cleaned ignition switch contacts and wire harness connector contacts. Could a relay be the...


Bad ignition switch and starter symptoms are similar. The engine will turn sometimes and will not turn some other times. If it is the switch you will not even here a clicking sound. If the starter is bad you might hear a clicking. If the distributor is bad than the engine will turn every time but it will not start running or will start but not run properly (misfire).

May 12, 2010 | 1991 Nissan Pathfinder

1 Answer

Ignition switch won't turn, locked


tumblers in the ignition switch and/or thew key itself is worn down and not pushing the tumblers into correct position. Only fix is to get a new switch assembley or try a fresh cut key.

Jul 20, 2009 | 1998 Oldsmobile Intrigue

1 Answer

Some it starts


my 97 geo metro will not start when I turn the ignition key. The radio will work, buzzer etc. I can jump it with another car and it will start and run. If I turn ignition key to start, there is absolutely no crank, no click, no nothing. Could this be ignition module, bad battery, voltage regulator, starter?

Jun 20, 2009 | 1997 Geo Metro

1 Answer

2001 Chev Astro Cargo Van


the problem is your ignition switch.

the connection with the start contact is sometimes missing.

if you want to save money, you can trace the starter wire and hook up a push button wire to start your starter. the other lead of the wire goes to the ignition switch to from the " on " lead so that if you turn off your key, there is no accidental starting of your engine.

tnx 4 using fixya,

drcool

Sep 13, 2008 | 2001 Chevrolet Astro

1 Answer

Engine will randomly shut off while driving at various speeds, sometimes while idling. also security system often does not work, and sometimes activates itself and sounds alarm.


1993 Mitsubishi 3000 GT stalls for no good reason, you never really know for sure exactly when it’s going to happen. It might start up right away, or after a few cranks. It may be hard to start in the first place. This could be caused by a faulty ignition switch, and could be easily repaired.
.5- If the engine cranks but wont start, hold the key firmly pressed inward or frontward while trying to start.
1- If the engine starts: energetically jiggle the ignition key back and forth while the engine is running.
2- If the engine stalls at any time while doing this, then you may have a defective ignition switch.
2.5- Remove the Ignition key from the ignition.
3- Remove the four screws from underneath the steering column cover.
4- Hold the lower half of the cover with both hands and pull it apart from the upper half. You might have to use some force to overcome the locking tabs, you might have to tilt the steering wheel up or down to remove the covers.
5- Insert the ignition key back into the key cylinder (ignition switch)
6- Turn the key to the on position (don’t start the engine)
7- Move the key in and outward while observing the opposite side of the key cylinder
8- If the opposite end of the key cylinder moves even a little, while moving the key; then the wiring side of the ignition switch has popped out of the key cylinder and needs to be secured back into place. (You don’t have to replace the key cylinder)
9- Press the wiring end of the key cylinder inward and tie it down firmly with a strong nylon zip tie.
10- This should take care of the problem.
10.5- Remove the ignition key.
11- Reinstall the removed parts.

Don’t use a rubber band to tie down the loose ignition part; it will break-off when the ignition switch gets hot.

Jul 06, 2008 | 1992 Mitsubishi 3000GT

Not finding what you are looking for?
2000 Isuzu Rodeo Logo

Related Topics:

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14405 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...