Question about 2001 Ford Focus

1 Answer

Hi there im having difficulty removing my cassette player from my 51 plate ford focus ghia is there any tips or hints you may have? i have 4 holes, 2 at either side of the player and i have the rods to pull and remove it but me and my mate cant seem to pull it out is the any thing ive not done? many thanks

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 1,056 Answers

You can make tool to take it out. Get a hanger, and make two U shaped tools out that wire hanger. The U should be as such so that its ends will fit on the holes. The two U shaped tools are for each side. You push them into the holes to free up the loocking mechanism all at the same time then you can pull out the radio. GOOD LUCK!!

Posted on Nov 14, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to install tow bar ford focus ghia 51

You will need to talk to a local business that does this type of work for suggestions. Motorhome sales and service have this info.

Oct 05, 2012 | 2001 Ford Focus

1 Answer

Hi i got a focus ghia 2 litre on a 51 plate,the electronic computer, which tells you you have 20 miles left before you run out of fuel , is that acurate ?? regards chris..

That should be acurate to about a few miles, it take the average miles per gallon to find its reading, a good test would be to put a gallon of gas in the car and drive until it tells you you have 2 miles left and then go get gas, this way if you run out you will be able to put gas in, i think this would be a good way to test the system. good day.

May 14, 2011 | 2001 Ford Focus

1 Answer

How do you remove am/fm cd player from 2005 ford focus

There is a plastic "plate" surrounding your CD player; on the back of this "plate" there are 4 plastic guide/retainer pins about 3/4 of an inch long. Generally located in the 4 corners of the "plate." With that in mind, using a taped-up, flat-headed screw driver(tape the flat end as to not scratch the interior trim) and simply and ever so lightly, pry the coin dish(below the "plate" mentioned above)out and away from the dash,opening a hand sizes hole. From that hole using the same screw-driver, using the same technique, remove the plate; being oh so careful because the temp control knobs, cig lighter, etc, come out attached to the "plate."
You will notice, I believe, 4 small octagonal plastic bolt heads protruding from the area right next to the player......remove those bolts, unplug radio and whalll-laah..

Apr 03, 2010 | 2005 Ford Focus

1 Answer

Hi have a ford focus 1.8 zetec 1999 trying to replace the speed sensor i have removed the retaing pin eventually however im having difficulty removing the sensor still its stuck tight are there anymore...

pulls out but are very tight try warming the area round sensor very carefully with a hot air gun then try and twist it i have had them where i have had to drill hole in sensor screw in slide hammer to remove

Feb 08, 2010 | 2000 Ford Focus

1 Answer

Wheres the filler hole on a 51 plate ford focus

Its usually on top of the gear box and there is usually a black or grey plastic top you can take off.

Jan 19, 2010 | 2001 Ford Focus

1 Answer

Hi i have a 03 ford focus 2000 ghia im loosing

new one on me ,never seen a connection on the side of the pump on a europeon model?? wouldnt surprise me to find that you will have to replace the whole pump ,if it doesnt look lkie its replaceable then i would try cleaning it then applying a coating of araldite to seal it up .But i can honestly say i have never seen a switch on a pump yet ,???? But still their is always a first time for everything

Sep 01, 2009 | 2000 Ford Focus

1 Answer

What type of brake fluid is used for a ford focus ghia 2006

pbr dot 3 or 4. be sure to flush complete system from master cyl. to all four calipers starting at l/r, r/r,l/f,rf.

Dec 18, 2008 | 2006 Ford Focus

Not finding what you are looking for?
2001 Ford Focus Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers


Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides