Question about 2002 Isuzu Rodeo
The Haynes manual is incorrect for this model year. 2002 Rodeo instructions are similar to the older model vehicles in that there is a retainer clip that secures the bulb in place. Directions: There are two separate rubber boots at the back of the headlight assy. The smaller of two which covers the connector plug can be removed by pulling straight back. This can be somewhat difficult as there is little room to work and care should be taken if not to destroy the existing bulb. The second boot can be removed by pulling back on one its (2) rubber tangs. I found a pair of needle nose pliers at a slight angle helps. Then you can see the wire clip that holds the actual bulb in the housing. Push the clip in (towards the bulb) and to the side away from the retainer clip. The bulb will now be free and just about drop out. Reverse the steps to replace.
Posted on Mar 18, 2010
Can someone please help.
The rh headlight on my 2002 Holden Rodeo DX is cracked and has to be replaced as Im selling it.
I'm looking for simple instructions on how to remove and replace it please.
I can clearly see about 4 plastic clips to remove the front grill but I don't know what else to do.
Posted on May 08, 2011
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 21, 2014 | 1998 Isuzu Rodeo
Jul 16, 2014 | 2002 Isuzu Rodeo
May 02, 2011 | 1999 Isuzu Rodeo
May 19, 2010 | 2002 Isuzu Axiom
May 18, 2010 | 2002 Isuzu Rodeo
Jun 10, 2009 | 2002 Pontiac Montana
Dec 28, 2008 | 2000 Isuzu Rodeo
Oct 26, 2008 | 2001 Isuzu Rodeo
Oct 20, 2008 | 1999 Isuzu Rodeo
510 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: