Question about 1991 Ford LTD Crown Victoria

1 Answer

I have a 90 Crown Victoria. Do I need to have

I have a 90 Crown Victoria. Do I need to have the smog system on the motor?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

This depends where you live ,but in most large meto areas you must pass the emissions test set by your state and they get this from the federal gov't.I you live hopefully some where that emissions testing are not required your vehicle should run just fine with out what your talking about,but please note that it is illeagle to take off any part of your factory emissions system.The fed's and the state are very strict on this the fine are huge ,much cheaper to fix what is broken if this is the case.The Crown Vic's mostly came with 5.0 -- 302 engines that just run forever 1 of ford's best motors they ever built.Good luck I hope this helps ya out .

Posted on Nov 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 V8 4.6l. It turns over, but why won't it start?


Part 1 -How to Test the Starter Motor (Ford 4.6L, 5.4L)

troubleshootmyvehicle.com > Ford > 4.6L, 5.4L
Mar 2, 2011 - Page 1 of 3: How to test a BAD Starter (Ford 4.6L and 5.4L Pick Up and SUV). ... a BAD starter motor on your 4.6L or 5.4L V8 equipped car, pick up or SUV. ...and will turn over the engine; -OR-; The starter motor won't do a thing. ... Crown Victoria ... 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005.

Question: 1997 Crown Victoria Lx Cant Turn on and Cant ...

www.2carpros.com/.../question-1997-crown-victoria-lx-cant-turn-on-an...
May 26, 2014 - Ok so i put the keys in the car turn the key but seems to me it moves more ... 1997 Ford Crown Victoria • 4.6L V8 RWD Automatic • 99,625 miles ... Keywon't turn off accessories or turn car over and ignition cylinder turns too ...

Oct 19, 2015 | Ford Crown Victoria Cars & Trucks

1 Answer

2001 ford crown vic heater/ac fan switch doesn't blow anything at all on all speeds


you need to replace the blower resistor...90 percent of the time that will be the problem in your situation...before replacing it..check for power to blower motor first...if it has power then replace blower motor if not its the resistor

Nov 17, 2013 | 2000 Ford Crown Victoria

2 Answers

How to get windows to go up and down in 1995 ford crown victoria


No up
No down
One window
All windows
Window fails down
You hear motor run & no window movement
You work the switches & they work sometimes

I would imagine you need that answered at a
repair shop

Feb 14, 2013 | 1995 Ford Crown Victoria

1 Answer

How much should I pay for the y pipe on the exhaust system. Its a 5.0 motor 1987 crown victoria 4 door.


Wouldn't you look on a web site such as NAPA
or call a local auto parts store?

This is not a data base or a business site

Jan 31, 2011 | 1987 Ford Crown Victoria

1 Answer

2005 Crown Vic climat contr fan not working Fuses good Motor good


does it have a digital control panel? As this uses an electronic blower speed controller located at the engine compartment (rear engine block) fix on ac phlenum try to shake the connector or wire while the system is on.

Jan 31, 2010 | 2005 Ford Crown Victoria

1 Answer

(90 crown victoria)when i pull off from a stop,da engine revs up but it takes a few seconds for the car to move after i hit gas pedal


sounds like your having transmission problems. check fluid first if that doesnt help have it checke out

Oct 13, 2009 | 1990 Ford LTD Crown Victoria

1 Answer

Wipier motor burnt out on 05 crown victoria?


Either the motor winding shorted or; the connectors on the motor are loose/corroded causing arcing and overheating or; the linkage is binding putting too much load on the motor.

Sounds like the wiper motor needs replacing.

Charlie

Aug 20, 2009 | 2005 Ford Crown Victoria

2 Answers

2004 and 2001, are parts interchangeable?


Yes they are as long as the Motors are Similar.

Jan 22, 2009 | 2004 Ford Crown Victoria

1 Answer

1997 ford crown victoria window reulator and motor replacement steps


easy real easy.. go out to the local pull a part junk yard.. get a cross ref on your car.. find that car in the yard and tear it apart in the yard so that you can then later be able to do the same thing in your on ride.. all you need for tools is a walmart 30 piece set your good to go.

Oct 18, 2008 | 1997 Ford Crown Victoria

Not finding what you are looking for?
1991 Ford LTD Crown Victoria Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...