Question about 1989 Chevrolet Camaro

1 Answer

How do i reprogram my ignition switch n my 92 camaro rs.i will not start ,brand new starter,ignition switch. new fuses.all the power comes on.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

You can't. I just replaced mine on my 92 Camaro and it's a pain in the ***. You can only install the ignition switch one way, then you have to make sure that the rod coming off the tumbler (where your key goes) is in the right spot.

Posted on Feb 23, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My a/c and fan dont work in my 92 camaro rs


look at the fuseable links down at the starter

Jul 02, 2012 | 1992 Chevrolet Camaro

1 Answer

I have a 91 camaro rs v6 just did tune up plugs and wires and oil change power comes on to everything but car wont crank doesn't make a sound had plugs and wires checked i was told to change the...


1. battery would have run down since been parked for extensive duration. insert key into ignition to perform start, lighting displays is indication that bettery is functioning esle car needs a new batery.

Jul 21, 2011 | 1991 Chevrolet Camaro

1 Answer

I have a 1991 Camaro RS 3.1 ltr I changed my starter and ignition because my car would not start. I finally got it going and not it is doing the same thing as before. The starter is not engaging the...


When you turn the key to the start position, check to see if you have power at the "s" terminal on the starter. Also, be sure you have power at the larbe terminal that comes from the battery.If you are not getting power to the s terminal, the vats could be the problem, or the neutral safety switch also. If you are getting power to the s terminal on the starter, with the key in the start position, a faulty starter would be indicated.

Jun 18, 2011 | 1991 Chevrolet Camaro

1 Answer

1986 camaro v8 tunedport will not start wipers lights etc work brand new battery.i get no crank at all. neutral safty switch mabe??what do you think????


if you use a test light and check for voltage on the big wire at the starter this will tell you that the wiring from the battery to the starter is good.now check the small wire at the starter while someone tries to start the car you should have power to that wire.if you do then the wiring from the ignition switch to the starter terminal and everything in between is good.the problem is the starter solenoid or the starter.its a good idea to replace the starter as a new solenoid comes with it as apposed to changing only the solenoid and the starter goes bad shortly after.if you don`t have power to the terminal then check the neutral safety switch.

Apr 05, 2011 | 1986 Chevrolet Camaro

1 Answer

My 92 toyota corolla wont start battery is charged a brand new starter it still wont start,i put the starter on i ran fine but it wont start now please help.


Check power is coming out of your exiter wire ,the little single spade terminal that plugs on to your starter,if not maybe a faulty ignition switch or damaged loom.

Mar 02, 2011 | 1992 Toyota Corolla

1 Answer

92 camaro


which relay switch? starter relay? behind glove box.
starter solenoid? on starter.

Feb 13, 2010 | 1990 Chevrolet Camaro

1 Answer

My 92 camaro rs v8 won't start.Replaced starter and bypassed VATS


if battery and conectors are very clean and tight,check for bad ground to engine from battery,,also fusable links off of starter or positive small post near fuses, important,,,is the alternator charging ? and have u tried a new battery? voltage should read 13.50 to 14.25 while running 12.5 to 12.65 when not running

Jun 29, 2009 | 1992 Chevrolet Camaro

3 Answers

I have a 91 camaro rs i put a starter in it it wont start. the guy i got it from made a new key at a chevy dealer i think why wont it do anything. ty john


If the key turns, that's all it needs to do. Check, with a test light, to see if you have power to the starter. It could be a dirty loose battery cable, or a faulty cable, or a fuseable link in the positie cable that is gone. It could be the ignition switch itself. Not the key and tumbler, the switch on the steering column. You'll have to do some checking.

Jun 29, 2009 | 1991 Chevrolet Camaro

1 Answer

92 RS Camaro, Replaced battery and now car has no power?


are your battery post bolts clean and tight, my 89 rs ran fine untill i decided i wanted shiny new battery bolts, when i put them in and tightened them down my car had no power at all, i checked how tight they were, and they were TIGHT so i wiggled the black cable and re tightened it and bam my lights turned on, tryied starting it, and it started, sometimes you just gotta make sure the connection is really good, not just how tight it is, also check your ground wires, there are a few but the main 2 are located at the front pass side next to the batt, and on the back firewall going from the bottom pass head to the firewall, hope that helps, if not comment back

Mar 17, 2009 | 1992 Chevrolet Camaro

1 Answer

No spark in my 1992 Chevy Camaro RS 3.1L engine rotates but doesn't engage.


Hi Candie, if you have air, fuel and spark it should run. Getting to the fuel side-"is fuel getting into the engine?" Your ignition may work, your starter may work, fuel pump may work, but if you have an ignition key with a resistor inside it (little silver piece of metal in the plastic of the ignition key) the key, it could be bad and will shut down the fuel injector. It's part of the security system if some idiot tries to break the steering column to steal your car. It won't run.
I have a 92 Z28 with a 350 and I had to get a new ignition with resistor and correct resistor ohm key. About $400.00 bucks but if you search around Z28 forums there are ways to bypass this for less $$ if you want to.

Aug 05, 2008 | 1992 Chevrolet Camaro

Not finding what you are looking for?
Cars & Trucks Logo

348 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...