Question about 1995 Chrysler New Yorker

2 Answers

How to set the timing on a 1995 chrysler new yorker

Setting the timing on a 1995 chrysler new yorker

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

YES, you CAN set the timing on these cars. (i own two of them and have changed timing on both) you take off everything to get the timing, (its located BEHIND the front plate of motor) you will also want to change the water pump since you already there. the water pump runs off the timing belt on these cars. bad design, but thats what it is and youy can either do it now while youve got the front of the motor broke down and save yourself alot of time and effort later or wait. id recomend do it now. anyhow, once you have the front plate off and are looking at the timing belt you will see if wraps around three pullys. the top two pully are you cam shaft pullys. the bottom is your crank shaft. on all the pullys there are marks each pully has its own mark that needs to be alligned with the alligning mark for THAT pully. you can acmplish this by simply turning the pully as many rotations as needing to allign it (THEM). AND THATS IT. ONCE ALLIGNED PUT BACK TOGETHER AND CRANK IT UP.

Posted on Sep 03, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 192 Answers

There is no way to set the timing on this vehicle. Everything is computer controlled. The timing is controlled by readings from a combination sensors on the engine. The main sensor responsible for the timing is the CAM Position Sensor. This isn't the only sensor, just the main one. It is found on the top front of the engine, right near the coolant thermostat housing.

Posted on Nov 14, 2009

  • jasperg83 Mar 30, 2011

    Do you have timing diagram with marks on



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Wiring diagram for 1995 Chrysler New Yorker wiper circuit

These are the biggest I han post on here due to a size limit. If you need them bigger you can email me at and I will send larger diagrams but remind me what you need. Hope this helps....


Nov 24, 2011 | 1995 Chrysler New Yorker

1 Answer

Do you have to take the timeing change off to change water pump on new yorker 3.5

if the water pump is internal & driven by the timing belt you may have to,but if it external & driven by the fan belt you should'nt have to......hope this helps......cheers.

Jul 18, 2011 | 1995 Chrysler New Yorker

1 Answer

How to change the headlight bulb on a 1995 chrysler new yorker

look inside the engine bay behind the headlight, you will see a large rubber weather seal over the rear of the headlight which covers the wiring and spring to release the bulb, check it out
remove the multi wire plug b4 removing the bulb ok

Jun 24, 2010 | 1995 Chrysler New Yorker

1 Answer

My husband just paid $110.00 for a new battery and the car will not start nothing no clicking, nothing some one said the starter or starter solenoid? what do you think?? He has a 1995 chrysler New Yorker

$110.00??,MAN THATS STEEP!!!!!,tell your husband to take his time and check all grounds,and all everything from the ignition switch to the starter,to elimanate the starter,get him a starter button,which attaches to the starter,car starts,with this device,he is on his way !!!!!!!

Apr 04, 2010 | 1991 Chrysler New Yorker

1 Answer

Where is the heater core located in a chrysler New Yorker?

Definitely not a do-it-yourself project. It involves discharging the air conditioning system and pulling the steering column and dashboard.

Hope helped.

Nov 04, 2009 | 1995 Chrysler New Yorker

1 Answer

Timing off

Align the camshaft sprockets between the marks on the covers,behind pulley's

Align the crankshaft sprocket with the TDC mark on the oil pump cover.

May 19, 2009 | 1995 Chrysler New Yorker

Not finding what you are looking for?
1995 Chrysler New Yorker Logo

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides