Question about 2000 Ford F150 Flareside SuperCab

1 Answer

I need to know the torque settings for the alternator bolts on a 2000 ford f-150.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 564 Answers

Dont know the actual settings but if you tighten the bolts until they are snug and then give them a have a turn you will be ok all you want to do is make sure that they dont run themselves out when the engine is running.

Posted on Nov 14, 2009

Testimonial: "Super! That is exactly what I needed to know."

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4610 ford diesel tractor water pump bolt torque settings


First you need to know the diameter of the bolts and the type of thread ie 3/8 N/C or 5/16 N/F then look at the type of bolt ie plain steel or high tensile SAE grade 3, 4, or 6, once you know this go to a general purpose bolt torque chart, and derive the torque spec info.
If the water pump is cast iron use the full torque specification.
If the water pump is alloy then reduce the torque spec 10%

Below is an example of a general purpose bolt / nut torque chart

26186159-4xbrgr0a3wt3vp4m2wlhd0as-1-0.jpg

May 05, 2016 | Ford Cars & Trucks

1 Answer

Where is the alternator on a 2003 chrysler concord and how do you change it what tools do i need


FIRST TURN OFF RADIO THEN DISCONNECT NEGATIVE BATTERY CABLE.IF YOU HAVE 2.7L ENGINE YOU HAVE TO REMOVE LOWER PLASTIC SPLASH SHIELD, REMOVE TRANSMISSION COOLER AND POSITION IT ASIDE.LOWER RADIATOR CROSSMEMBER SUPPORT, LOOSEN DONT REMOVE,ADJUSTING T BOLT AND THE PIVOT BOLT LOOSEN BELT ADJUSTING BOLT, REMOVE DRIVE. REMOVE ALTERNATOR FIELD CIRCUIT PLUG. REMOVE ALTERNATOR BATTERY PLUS TERMINAL NUT AND WIRE REMOVE.PIVOT BOLT SPACER CAREFUL DONT DROP LOSE SPACER. THEN REMOVE ALTERNATOR. YOU NEED BELT TENSION GAUGE TORQUE ADJUSTING T BOLT UNTIL TENSION GAUGE READS 120 LBS USED BELT NEW BELT 180 - 200 LBS. YOU NEED ALL BASIC MECHANIC TOOL SET WITH METRIC SOCKETS METRIC OPEN BOX END WRENCHES.SIZE WRENCH RANGE 5MM UP TO 19MM NEED ADJUSTABLE PLIERS NEED SCREW DRIVERS LIKE FLAT HEAD AND PHILLIPS. YOU NEED TORQUE WRENCH. FOR THE PIVOT BOLT NEED TORQUE TO 40 FT LBS. THE 8MM MOUNTING BOLT TO 30 FT LBS. 10MM BOLT TO 40 FT LBS.

Sep 08, 2011 | 2000 Chrysler Concorde

1 Answer

I have replaced my clutch on my 1988 ford and i need to know the weight of the torque specks needed


PRESSURE PLATE BOLTS TORQUE IS 20 - 29 FT LBS. TORQUE IN CRISS CROSS PATTERN. CLUTCH HOUSING SHIELD TO ENGINE TORQUE BOLTS TO 40 - 50 FT LBS.

Feb 21, 2011 | 1988 Ford F 150

1 Answer

Looking for torg specs on tire lug nuts on a 15passenger van f350


Hello there
FORD TRUCK
Wheel Nut Torque Specifications
Make/Model Description Years Torque Make/Model Description Years Torque
FORD (continued)
FORD TRUCK
E250 Van 8 Lug, 9/16" 2008-88 140 -160 ft lbs
E350 Van 8 Lug, 9/16" 2008-88 140 -160 ft lbs
Escape - 2003-01 98
Excursion - 2003-01 160
Excursion - 2000 148
Expedition - 2003-01 150
Expedition 19mm Hex 2000 100
Expedition 21mm Hex 2000 150
Expedition - 1999-97 100
F Super Duty Pickup 10 Lug, 9/16" 2003-99 165
F Super Duty Pickup 10 Lug, 9/16" 1998-96 140
F150 Pickup - 2003-01 150
F150 Pickup 19mm Hex 2000 100
F150 Pickup 21mm Hex 2000 150
F150 Pickup - 1999-88 100
F250, F350 Pickup 8 Lug, 9/16" 2003-01 160
F250, F350 Pickup 8 Lug, 9/16" 2000-99 148
F250, F350 Pickup 8 Lug, 9/16" 1998-88 140
Ranger, Windstar - 2003-87 100

Feb 01, 2011 | 2008 Ford F-350

1 Answer

How do you replace an alternater in a 1997 dodge ram 150 truck


Hi,

You will be needigng the below;

  • New alternator
  • Socket wrench set
  • Torque wrench

  • Determine which alternator your Dodge Ram will need. You'll want to be sure the new alternator is compatible with your Ram's engine. A Dodge Ram made after 2001 may be equipped with a 3.7 L, 4.7 L, 5.7 L Hemi V8, 5.9 L Magnum V8, 5.9 L Cummins diesel, 6.7 L Cummins diesel, 8.0 L Magnum or 8.3 L Viper engine.

    Disconnect the negative battery cable with a socket wrench. Remove the accessory drive belt and disconnect the wiring harness from the alternator. You will also need to remove the support bracket with a socket wrench for 3.7 L, 4.7 L and 5.7 L engines.

    Take the mounting bolts off of the alternator with a socket wrench and remove the alternator assembly.

    Install the new alternator assembly. If you have a 3.7 L engine, tighten the horizontal bolts to 42 foot pounds and the vertical bolt to 29 foot pounds with a torque wrench. Torque the long horizontal bolt and vertical bolt to 41 foot pounds and the short horizontal bolt to 55 foot pounds for a 4.7 L engine. Torque the mounting bolts to 30 foot pounds for all other engines.

    Connect the wiring harness to the alternator, install the accessory drive belt and connect the negative battery cable.

    I hope this helps.

    Good luck.

    Nov 30, 2010 | 2000 Dodge Ram 1500 Truck

    1 Answer

    How do i remove an alternator on a 2000 caddilac seville sts


    FIRST TURN OFF RADIO.REMOVE NEGATIVE BATTERY CABLE. REMOVE ACCESSORY DRIVE BELT.REMOVE THE COOLING FANS.REMOVE ALTERNATOR COOLER OUTLET HOSE.REMOVE ALTERNATOR COOLER INLET HOSE.REMOVE ELECTRICAL CONNECTORS.REMOVE ALTERNATOR MOUNTING BOLTS.REMOVE ALTERNATOR.PUT EVERYTHING BACK VISA VERSA TORQUE ALTERNATOR BOLTS 37 FT LBS.TORQUE ELECTRICAL CONNECTORS + BATTERY CONNECTION 115 INCH POUND,ALTERNATOR COOLER HOSE TORQUE 80 INCH POUNDS.

    Aug 15, 2010 | 2000 Cadillac Seville

    1 Answer

    Need the torque spec on the rear diff. cover bolts - 2005 F-150


    just tighten them down you dont need to torque them its not nessary.

    Nov 04, 2009 | 2003 Ford F150 Regular Cab

    1 Answer

    Does anyone knows how to remove the alternator i


    1. Disconnect the battery ground cable, then disengage the alternator drive belt from the alternator pulley.
    2. Raise and support the vehicle, then remove the righthand wheel and tire.
    3. Remove the righthand outer tie rod end from righthand spindle.
    4. Remove exhaust system Y pipe as follows:
      1. Remove the front and rear Y pipe flange fasteners from the exhaust manifolds.
      2. Remove the stud bolt and nut retainer from the oil pan, then remove the two remaining nuts and bolts from U pipe outlet connection.
      3. Discard the exhaust converter inlet gasket, then remove the Y pipe.
    1. Disconnect wire harness attachments to integral alternator/voltage regulator, then remove the alternator brace bolts from the alternator.
    2. Remove the righthand halfshaft.
    3. Remove the alternator bolts from bracket, then rotate the alternator and remove it through the righthand side of the vehicle.
    4. Remove the bracket bolts and bracket from the cylinder block.
    5. Reverse the procedure to install, noting the following:
      1. Torque the alternator bracket bolts to 15-22 ft lb.
      2. Torque the alternator bolts to 29-40 ft lb.
      3. Torque the alternator brace bolts to 15-22 ft lb.
      4. Torque the output terminal nut to 6.7-8.1 ft lb.

    Sep 17, 2009 | 1996 Ford Contour

    1 Answer

    Require ford escort rs 2000 1976 torque settings head bolts


    2lt overhead cam with them horrible tappet adjusters,cast iron head but valves dont hit the head if the timing belt breaks ,but it does on the 1600 .called a pinto in america .Remember the assembly line well ,have many a fond memory of working on it and the staff canteen on night shift ,what lovely grub we got.Head bolt torque is about 80lbs because i used to pull them down to check them after the machine had tightened them up

    Apr 24, 2009 | 1997 Ford Escort

    Not finding what you are looking for?
    2000 Ford F150 Flareside SuperCab Logo

    Related Topics:

    66 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    76630 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    fordexpert

    Level 3 Expert

    5530 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...