Question about 2000 Isuzu Rodeo

1 Answer

RR WIPER AND SECRUITY SYSTEM NOT WORKING,ARE THEY CONNECTED?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,056 Answers

I doubt they are, but they may run on the common fuse. check to see if there is a blown fuse.

Posted on Nov 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cadillac Deville 99


Wiper/Washer System (Pulse) Schematics (w/o CE1)
Wiper/Washer System (Pulse) Schematics (w/CE1)

Which one does yours have ?

The switch could be bad or the windshield wiper / washer module . Do you own a DVOM - digital volt ohm meter ? Do you know how to do automotive electrical trouble shooting ? There are a few good videos on youtube on basic electrical trouble shooting an how to read wiring diagrams . Go to http://www.bbbind.com/free_tsb.html for free wiring diagrams . Check B+ voltage at the switch (in an out ) at the different speeds .Check for B+ voltage at the wiper washer module , it's part of the wiper motor .
The windshield wiper/washer system consists of a permanent-magnet depressed-park wiper motor assembly, a wiper transmission assembly, wiper arm and blade assemblies, a washer pump mounted on a washer solvent container, and a wiper/washer switch assembly.
The wiper/washer system is a pulse (delay) type. Pulse timing and demand wash functions are controlled electronically. Wiper/Washer System Description (Rainsense)
The windshield wiper/washer system consists of a Rainsense module, a permanent-magnet, depressed-park wiper motor assembly, a wiper transmission, wiper arm and blade assemblies, a washer pump mounted on a washer solvent reservoir, and a wiper/washer switch assembly.
The wiper/washer system is a rain sensing type. Rainsense functions are controlled electronically. 1
Was the Wiper/Washer System Check performed?
--
Go to Step 2
Go to Wiper/Washer System Check

2
Inspect the WIPERS fuse A9 for an open.
Is the fuse open?
--
YES - Go to Step 3
NO - Go to Step 4

3
Replace the WIPERS fuse.
Is the replacement complete?
--
Go to Wiper/Washer System Check
--

4
Disconnect the wiper/washer switch connector C202.
Turn ignition switch ON.
Connect a test light from connector C202, terminal E5 to ground.
Is the test light on?
--
YES - Go to Step 16
NO - Go to Step 5

5
Connect a test light from Accessory Relay, terminal A1, to ground.
Is the test light on?
--
YES - Go to Step 6
NO - Go to Step 11

6
Connect a test light from Accessory Relay, terminal A3, to ground.
Is the test light on?
--
YES - Go to Step 7
NO - Go to Step 12

7
Connect a test light from Accessory Relay, terminal B1 to terminal A3.
Is the test light on?
--
YES - Go to Step 8
NO - Go to Step 15

8
Inspect CKT 143 for an open or poor connection between connector C202 and the Accessory Relay.
Was an open or poor connection found?
--
YES - Go to Step 9
NO - Go to Step 10

9
Repair the open or poor connection in CKT 143.
Is the repair complete?
--
Go to Wiper/Washer System Check
--

10
Replace the the Accessory Relay.
Is the replacement complete?
--
Go to Wiper/Washer System Check
--

11
Repair the open in CKT 1040 or the power feed circuit to the WIPERS fuse.
Is the repair complete?
--
Go to Wiper/Washer System Check
--

12
Inspect the ACC fuse C13 for an open.

let me know if you make it this far an then I will send the rest of testing procedures !

Mar 09, 2016 | Cadillac DeVille Cars & Trucks

1 Answer

Why do my wipers on my 1998 chevy lumina only work non hig


Do you know how to do electrical testing ? Here is diagnostic trouble flow chart .You will need a wiring diagram . Go to http://www.bbbind.com/free_tsb.html free wiring diagrams . You can see basic automotive trouble shooting videos on you tube if you are not familiar with this .
Wipers Low Mode Inoperative, High Mode Operates

2
Disconnect wiper motor connector C1.
Turn the ignition switch ON.
Set the wiper switch to LO.
Connect a test light from wiper motor connector C1, terminal B, to ground.
Is the test light on?
--
YES - Go to Step 6
NO - Go to Step 3

3
Inspect for a poor connection or an open in CKT 91.
Is a poor connection or an open present?
--
YES - Go to Step 4
NO - Go to Step 5

4
Repair the poor connection or the open in CKT 91.
Is the repair complete?
--
Go to Wiper/Washer System Check
--

5
Replace the wiper/washer switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle in Steering Wheel and Column -Tilt.
Is the replacement complete?
--
Go to Wiper/Washer System Check
--

6
Connect a test light from wiper motor connector C1, terminal C, to ground.
Is the test light on?
--
YES - Go to Step 10
NO - Go to Step 7

7
Inspect for a poor connection or an open in CKT 95.
Is a poor connection or an open present?
--
Go to Step 9
Go to Step 8

8
Repair the poor connection or the open in CKT 95.
Is the repair complete?
--
Go to Wiper/Washer System Check
--

9
Replace the wiper/washer switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle in Steering Wheel and Column -Tilt.
Is the replacement complete?
--
Go to Wiper/Washer System Check
--

10
Inspect for continuity between wiper motor connector C1, terminal A, and connector C2, terminal B, using a J39200.
Is continuity present?
--
Go to Step 12
Go to Step 11

11
Repair the open in CKT 196.
Is the repair complete?
--
Go to Wiper/Washer System Check
--

12
Inspect for a poor connection to the wiper motor at connector C1.
Is a poor connection present?
--
Go to Step 13
Go to Step 14

13
Repair the poor connection at wiper motor connector C1.
Is the repair complete?
--
Go to Wiper/Washer System Check
--

14
Replace the wiper motor. Refer to Windshield Wiper Motor Replacement .
Is the replacement complete?
--
Go to Wiper/Washer System Check
--

Feb 29, 2016 | Cars & Trucks

1 Answer

My back windshield wiper for my hummer h2 2005 won't turn off? How can i disable it untill i get to a mechanic?


Pull the two fuse's , RR WPR 15amp in the instrument panel fuse box an the RR WRP 25amp fuse in the under hood fuse box.

Nov 24, 2015 | Hummer Cars & Trucks

1 Answer

Which is the fuse for windscreen washer in a 2010 yaris car ?


The fuse box is located down or just above where a driver puts their left foot, under the steering well and below the coin box. According to ABMforum.com: "The front wiper rear wiper and washers are on separate fuses (15A WSH front and rear washers 25A WIP front wiper 15A RR WIP rear wiper)."

May 15, 2015 | 2010 Toyota Yaris

1 Answer

Rear wipers won't work on 2004 yukon


You need to remove the trim panel inside the back door, Unplug the motor, Be sure you have power on the Orange wire with key on, then test the Grey wire with wiper on, key on and if power? then likely bad motor If NO power on one or both wires at the plug? then fuse for rear wiper or bad switch the orange wire is from the RR WPR fuse in the under hood fuse box.
I doubt the other fuse is bad as if it was, the rear washer would not work So,, be sure power on orange wire, then check power on grey wire with wiper on and key on. No power on grey? bad switch. No power on both orange and grey? likely motor. This is the only way to test the system

Feb 26, 2015 | 2004 GMC Yukon

1 Answer

Nissan Quest 1999 Van - rear wiper seems to be running even if there is no key in the ignition and drains the battery, pulled RR Wiper fuse 10 Amp and it did not help. When the key was inserted into rear...


If you pulled the correct fuse for the rear wiper (Under the Dash) (or under the hood?) sometimes there are 2 fuses. But if you pulled the correct fuse and you still have power going to the wiper, I would pull the fuse on either side of the wiper fuse socket. With the wiper fuse socket empty, pull the fuse on the left or right one at a time, check for power at the wiper motor each time a fuse is pulled. When you find the power source then you'll need to trace your wiring where the wipers and say for example the dome light meet. I can almost bet the wires have rubbed or something like that and are feeding power to each other. Maybe a melted wire or like what I found on my sons car was that the back side of the fuse block had melted from him running all those high power stereos. He melted the block and the connection melted together. Hope this helps.

Jan 16, 2013 | 1999 Nissan Quest

1 Answer

99 chevy lumina wont start and the secruity light flashes


This is a pretty common occurence in GMs. Go to this link, try the 10 minute quick fix. If that doesn't work, you'll be looking at taking it to the dealer, or bypassing the security system. You can bypass it yourself. Go to this link for info and "do it yourself" options. http://vatspasslockpasskeysecurityhelp.yolasite.com/

Oct 20, 2011 | Cars & Trucks

2 Answers

96 t&C van rr wipers turn on my themselves and


Sounds like the Body Control Module, they are common on this van.

Apr 27, 2010 | 1997 Dodge Caravan

1 Answer

2000 gmc jimmy rear window wiper


Have you used a multimeter to see if any power is running through the wiper motor or from the plug that goes into the motor? Thats about all i could say to try...

Sep 18, 2009 | 1998 GMC Jimmy

Not finding what you are looking for?
2000 Isuzu Rodeo Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...