Question about Buick Regal

1 Answer

1993 buick regal back lamp on heater control panel is out, removed assembly, don't see any bulbs to replace?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 564 Answers

When you took the panel off did you see something that looked like end caps or something usually black or white in color. if you did see that then thats what you want to take out turn counter clockwise this will unlock them your bulb will be in that pull the bulb out put the new bulb in and reverse you process.

Posted on Nov 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change license plate bulbs in 2004 buick lesabre custom


  1. Disconnect the tail/back up lamp harness connector from the from the body wiring harness.
  2. Remove the tail/back up lamp assembly from the rear compartment lid.
  3. While supporting the tail/back up lamp assembly, unplug the tail/back up lamp harness grommet from the rear compartment lid and remove the tail/back up lamp from the vehicle.
  4. Remove the license plate lamp bulb from the lamp housing.

Sep 22, 2014 | 2004 Buick LeSabre

1 Answer

The third light of my buick regal custom breaks do not work I need to replace it and I don't now how to access I can't from the trunk, I hope you can give me instructions how to replace the bulb...


  • On the 3rd brake assembly you will see a little plate on the back. Remove the two screws holding that access plate on and you will have access to the socket. Twist the socket a quarter turn to the left and pull the socket out. The bulb pulls strait out of the socket.
  • As for the dome light there is just a frosted over that pulls right off. You may want to take a small flat tool (small screwdriver) and just pop the cover off. You will then see the glass bulb that pulls right out and then replace with a new one.


  • If you have any comments please leave them here and I will respond to them.
  • Hope this helps and thank you for using FixYa.

Regards, Tony

Aug 16, 2011 | 1993 Buick Regal

1 Answer

Rear turn signal b ulb burned out - How to replace


Rear Turn Signal, Brake and Parking Lights
  1. Remove the tail light assembly screws, then the assembly.
  2. Disconnect the twist lock socket from the lens housing. NOTE: To remove the bulb, turn the twist lock socket (at the rear of the housing) counterclockwise 1?4 turn, then remove the socket with the bulb; replace the bulb if defective. Fig. 7: Remove the tail light assembly screws, then the assembly - wagon shown 86816223.jpg Fig. 8: Twist the socket counterclockwise to remove from the housing 86816225.jpg Fig. 9: This type of bulb simply can be pulled out of the socket for replacement 86816226.jpg To install:
  3. Attach the socket assemblies to the back of the lamp unit.
  4. Install the lamp assembly to the vehicle with the mounting screws.
License Plate Light
  1. Remove the lens screws.
  2. Once the lens is removed you, can access the bulb and replace if needed. To install:
  3. Install the new bulb, then attach the lens to the body of the vehicle.
Center High Mount Stop Lamp
  1. Remove the screws securing the lamp cover.
  2. Remove the mounting nuts, then unplug the electrical harness to the lamp assembly.
  3. The lamp now should come out. To install:
  4. Position the lamp assembly to the vehicle, then attach the electrical harness to the lamp.
  5. Install the mounting nut, tighten to 62 inch lbs. (7 Nm).
  6. Attach the lamp cover. Fig. 10: Exploded view of the center high mount stop lamp assembly - wagon shown 86816230.gif
    Fig. 11: Light bulb application chart for all models with non-European headlamps 86816237.gif
    Fig. 12: Light bulb application chart for Buicks with European headlamps 86816235.gif
    Fig. 13: Light bulb application chart for Oldsmobiles with European headlamps 86816236.gif
    prev.gif next.gif

Dec 19, 2010 | 1994 Buick Century

1 Answer

How do I change my turn signal rear bulb? What tools will I need?


Welcome to Fixya!

Here's the procedure on how to replace the signal light.

1. Open the trunk
2. If you have a convenience net, remove it.
3. remove the top plastic wingnut that the convenience net hooks to.
4. pull back trunk liner
5. remove the 2 plastic wing nuts found under the trunk liner
6. carefully pull the tail light assembly from the vehicle
7. squeeze the tab on the socket (turn signal lamp in the inboard socket)
8. turn socket counter-clockwise
9. pull out the socket
10. pull lamp straight out
11. push in new bulb
12. reverse steps to reinstall lamp assembly
Note: replacing left and right turn signal bulbs takes about 5 minutes.

Thank you for using Fixya!

Dec 06, 2010 | 2001 Buick Regal

1 Answer

How do i replace a heater core in a 1993 buick regal?


Hello. Remove air cleaner and duct assembly. Drain coolant. Remove both heater hoses at the heater core. Remove right and left instrument panel sound insulators. Remove rear compartment heat duct adapter bolt/screw and adapter. Remove heater outlet duct bolts and duct. Remove heater core cover. Remove heater core.

Jul 31, 2010 | 1993 Buick Regal

1 Answer

How do u take the bulb out of the vanity lamps ( visor) on a 2001 buick regal.


the casing for the lamp assembly and mirror is held down by tiny clips.. you'll need to slide the assembly to one side in gently pry at the housing to pop it off.. it shouldn't take too much force to get those off

Aug 21, 2009 | 1998 Buick Regal

1 Answer

How do you replace the fog light bulbs on a 2004 buick regal?


Notes FOG LAMP BULB REPLACEMENT - FRONT

REMOVAL PROCEDURE
f98bf40.gif
  1. Remove the front bumper fascia deflector.
  2. Disconnect the electrical connector from the front fog lamp bulb/socket. CAUTION: Refer to Halogen Bulb Caution in Service Precautions.
01c84b0.gif
  1. Rotate the front fog lamp bulb/socket counterclockwise to release.
  2. Remove the fog lamp bulb/socket from the front fog lamp assembly.
4065803.gif


  1. Install the fog lamp bulb/socket to the fog lamp rotating clockwise until fully seated. CAUTION: Refer to Halogen Bulb Caution in Service Precautions.
b182709.gif
  1. Connect the electrical connector to the front fog lamp bulb/socket.
  2. Install the front bumper fascia deflector.

Jun 16, 2009 | Buick Regal Cars & Trucks

1 Answer

How is cornering lamp changed in 2002 Buick Regal.



 
 
Lighting
Headlight Assembly
Removal & Installation
To Remove:

Open the hood.
Apply light pressure to the headlamp lens to hold the headlamp in place while disconnecting the retainers.
Lift up the retainers to release and remove the retainers.
Remove the headlamp mounting tabs from the slots in the upper fascia support and fender reinforcement.
Disconnect the wiring harness from the headlamp assembly.
Remove headlamp.
Remove the rubber access cover from the appropriate bulb to be replaced.
Rotate the headlamp bulb/socket counterclockwise to remove from the headlamp assembly.
To Install:
Connect the wiring harness to the headlamp.
Install the headlamp bulb/socket to the headlamp assembly rotating the socket clockwise until fully seated.
Install the rubber access cover.
Position the headlamp mounting tabs to the slots in the upper fascia and fender reinforcement.
Apply light pressure to the headlamp lens to hold the headlamp in place while installing the retainers.
Align the headlamp assembly retainers and slide them over the headlamp mounting tabs.
Close the hood.

 
Top of Form 1
Bottom of Form 1

Mar 30, 2009 | 2002 Buick Regal

2 Answers

Left rear turn signal bulb is burned out.


Tail Lamp Assembly
Removal & Installation
To Remove:

  1. Open the rear compartment.
  2. If equipped, disconnect the cargo net.
  3. Remove the wingnut and pull back the rear compartment trim panel.
  4. Remove the wingnuts from the tail lamp assembly.
  5. Remove the tail lamp assembly from the rear body panel.
  6. Disconnect the electrical connector from the tail lamp assembly.
  7. Remove the tail lamp socket by turning counterclockwise.

  1. To Install:
  2. Install the tail lamp socket by turning clockwise.
  3. Connect the electrical connector to the tail lamp assembly.
  4. Position the tail lamp assembly to the rear body panel.
  5. Install and secure the wingnuts that attach the tail lamp assembly to the body panel.
  6. Position the rear trim panel to the rear compartment. Install and secure the wingnut.
  7. If equipped, connect the cargo net.
  8. Close the rear compartment.
      Please don't forget to rate !!!!!!

    Mar 28, 2009 | 2002 Buick Century

    1 Answer

    Replacing lamp that lights fuel guage


    you have to remove the ipc insterment panel cluster to change the bulb good luck some are led that can not be replaced

    Nov 26, 2008 | 1991 Buick Regal

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    87 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Buick Experts

    yadayada
    yadayada

    Level 3 Expert

    76070 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8266 Answers

    Are you a Buick Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...