Question about Hyundai Motor 2003 Sonata

1 Answer

I have sonata gold timing belt braoken now i want to change it but i dont no where is the timing marking pls tell me about this

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 566 Answers

Hi from the uk if your timing belt broke whilst driving? then i'm afraid you cannot just fit/replace belt as you will have caused damage either serious? or hopefully minor to the valves ie you will have bent some valves due to the designe of engine however to assess damage will req cyl head removal for investigation on damage ? the belt may have either broken or the tensioner collapsed causing belt failure ? these belts req to be renewed as a kit as specified in service manual/handbook if you do intend to D I Y ? the repair/s then i can scan/e mail you full instructions + diagram of c belt and timemarks+tensioner but advise you check out damage 1st b4 proceeding further ? hope this helps and wish you luck

Posted on Nov 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 hyundai sonata 2.4l timing belt interval how


You should get it done at 80k.hyundai dont pay the bill when it snaps.

Jan 02, 2011 | 2000 Hyundai Sonata

1 Answer

I want to buy used sonata gold ran 50000 atomatic pls tell is it good to do,or it is bit problamatic car for maintanance i am from chennai.thank u in advance


nearly all taxis in china are sonatas,so although they do have some problems.they are a good bye.just remember JD POWER put hyundai higher than mercedes for reliablity

Nov 08, 2010 | Hyundai Motor 2004 Sonata

2 Answers

Condition of timing belt on 2000 Hyundai Sonata GLS V6?


You would have to proceed like you were going to change the belt until you could see it to inspect it. Here is a link to instructions on inspecting and replacing it.
http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0996b43f803786a9

Jul 04, 2010 | 2000 Hyundai Sonata

1 Answer

Can a sonata bent valves if cam belt snaps and what is the timing marks 2.0 gls


The sonata has a 16 valve machine and works with a timing belt and not a timing chain. if the belt snaps it will bend the valves. not all the valves but some of them. a secondhand top with valves shouldn't be expensive. I would change all the valves. sometimes a valve cen bend so minimal it can't be picked up by the eye. you don't want take the top off again. it's a fairly simple machine. a mechanic should help you with the timing once you're done. good luck

May 07, 2010 | 1997 Hyundai Sonata

1 Answer

Timing marks on twin overhead cams 2.4 and crank mark.


Click on the following direct, Free Link. It has several Diagrams including the Timing Belt + Marks for your 2004 Hyundai Sonata 2.4L DOHC In-Line 4-Cylinder Engine (located on the bottom half of the Page on the Link). There are additional Diagrams that will prove to be helpful while you are doing this...

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2004/make/hyundai/model/sonata/2004_hyundai_sonata_timing_belt_diagram_marks.htm

Apr 16, 2010 | Hyundai Motor 2004 Sonata

2 Answers

2003 Hyundai Sonata vvvibbbrraattteess!!!!


There are Two Balance Shafts on the 2.4. Did your mechanic also change the balance shaft belt when he changed the timing belt? If he didn't, you'll want to do that. Since you mentioned the old belt was missing teeth, those loose teeth flying around could have damaged the crank position sensor and sensor blade (tone wheel). Also, the front balance shaft (on the side of the engine nearest the radiator), has THREE different positions when the timing mark is lined up - here's the glitch - ONLY ONE of them is the correct one - this is probably where your vibration is.

Oct 10, 2009 | Hyundai Motor 2003 Sonata

1 Answer

Car is making loud noise & wont idle


your timing marks must be off for the car not to idle. the timing belt is too tight, that is where the noise is coming from. rule of thumb is you should be able to twist the timing belt to just under 90 degrees on the longest section after the tensioner has tensioned and nut on pully it tightened. tensioners usually tension more than they need to.

May 25, 2009 | Hyundai Motor 1998 Sonata

1 Answer

Change spark plugs 2001 4 cyl hyundai sonata


You change One spark plug, and One wire at a time. Do you know where your timing belt is? If not, its on either the right or left side of the engine. There is a covor to the timing belt. You take the First plug that is closest to that belt. Then you work your way to the next closest all the way to the last one. Remember, you have to do ONE at a time.

Nov 30, 2008 | 2001 Hyundai Sonata

Not finding what you are looking for?
Hyundai Motor 2003 Sonata Logo

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...