Question about 2002 Ford Explorer

Sounds like the air handler (some call it air deflector) is in operative its probably stuck in down posistion which directs the air up to the vents and or defroster. if you can hear it moving you need to check the tubing that connects the vents to make sure that it has not been jarred loose. hope this helps you.

Posted on Nov 14, 2009

Hi,

a 6ya expert can help you resolve that issue over the phone in a minute or two.

best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).

click here to download the app (for users in the US for now) and get all the help you need.

goodluck!

Posted on Jan 02, 2017

An acre is 43,560 square feet, so a half acre is 21,780 square feet. If the lot is rectangular, you multiply the length of the long side (in feet) times the length of the short side (in feet). For instance if the lot is 200 feet x 110 feet, the area is 22,000 square feet, just a little over a half acre. If the lot is not rectangular, then you need to have a good knowledge of geometry to calculate the area.

Jun 04, 2017 | Cars & Trucks

Lineal feet are straight line feet.

You answered your own question.

25 feet.

Square feet are the surface area.

25 feet X 3 feet are 75 square feet.

You answered your own question.

25 feet.

Square feet are the surface area.

25 feet X 3 feet are 75 square feet.

Apr 18, 2017 | Cars & Trucks

Linear feet are a measure of length (no different from feet); square feet measure area. You cannot simply convert between measures of different kinds of quantities;the connection between them will be specific to a particular problem.A practical example in which this question can arise is in buying countertops for a kitchen. Some materials are sold by the square foot; others (basically those that are extruded, so they come in standard widths) are sold by the linear foot. In order to compare the two, you need to compute the area and wall length for the countertop you want.You can't convert between the two. All you have to do is to make the appropriate measurements so you can calculate the price of each item.The terms used in the lumber industry are a bit confusing.There are two terms that I think you might be mixing up.A LINEAR FOOT is simply the length of a board. If you want to know the area or volume of the board,you need additional information. For instance, 6 linear feet of 1-by-12 has an area of 6 square feet (12 inches = 1 foot, times 6 feet), and it's 1 inch thick, so the volume is 1/2 cubic foot (6 square feet times 1/12 foot). But 6 linear feet of a 1-by-6 board would have half the area and half the volume.A BOARD FOOT is equivalent to one square foot of a 1-inch-thick board. In other words, it is a square-foot-inch (ft^2-in), or 1/12 cubic foot.Linear feet are used for the pricing of a single size such as two-by-fours. Board feet are used for larger lumber that you are more likely to want to compare directly with different size boards .To sum up, neither a linear foot nor a board foot can be converted directly to square feet. A linear foot is a linear (length) measure, and a board foot is a volume measure. You need to know your particular board to do anything more, such as find the area.an example with an" L" shaped countertop will betwo rectangles are 24 by 80 inches and 24 by 36 inches. Thus the area is: 24 * 80 + 24 * 36 = 24 * (80 + 36) = 24 * 116= 2784 sq. in.To get it in square feet, divide by 144:

2784 / 144 = 19.33 sq. ft.The linear measure of this countertop would be 60 + 80 = 140 inches = 140/12 feet = 11.67 feet

2784 / 144 = 19.33 sq. ft.The linear measure of this countertop would be 60 + 80 = 140 inches = 140/12 feet = 11.67 feet

Apr 08, 2014 | Cars & Trucks

If the floor is 23 feet by 28 feet then the area is 644 square feet.

Mar 27, 2013 | Cars & Trucks

Sounds like a faulty blower motor resistor also check wire connector for melting.Location is next to floor on in heat duct towards the left of pass side feet area.

May 14, 2011 | 2005 GMC Yukon Xl Denali

The control switch for temperature is faulty, cable must have come off, leaving the heater core flap open. Make sure all cables are connected to the climate control switches. If it isn't anchored properly, it will move freely and not controlling the flaps or valve to position. Cable locks do come off and fall around the assembly, once that happens the cable doesn't have any counter resistance of it's position and move from it's own slack making it useless..

Jul 23, 2010 | 1991 Porsche 944

Look under the dash to see if the controller flaps are working(Unsure if u have auto or manual cable adjustment) move the hot to cold lever or press the button if electric as the old cable systems do break.Is the thermostat okay, look if the heater radiator core is okay, do you get a mist on the windscreen and sweet small?this can be done by removing the panels on either side oth the gearbox tunnel(footwell area) then use a torchlight to check.Some engine models have a 2 way valve in the engine bay/firewall area connected to the radiator that can rust or sieze and stop heatflow to the inner heater radiator.follow the radiator pipes going from the engine to the firewall to find it.

Feb 09, 2010 | 1995 Volkswagen Passat

PUT A HIGHER THERMASTAT IN. 190 OR 195 DEGREE

Dec 06, 2009 | 1997 Dodge Dakota

i had a simmiler problem on my 95 chevy pick up. on mine it would not chg. from floor to defrost, no matter where i put the selector. with mine it was the controls. if you go under solutions for k1500chevy gmc trucks it should tell you what your problem is, or give you an idea whats going on with yours.

Jan 12, 2009 | 1998 GMC Jimmy

the blower motor in under the hood on the passenger side of the van. it has three screws that hold it in place and is ususally easy to change out

Nov 16, 2008 | 1993 Ford Econoline

95 people viewed this question

Usually answered in minutes!

×