Question about 2004 Chevrolet Silverado 1500 Crew Cab

1 Answer

I cant seem to find the belt tennisoner - 2004 Chevrolet Silverado 1500 Crew Cab

Posted by on

  • Jason Lewis
    Jason Lewis May 11, 2010

    what kind of vehicle and what motor size is this on?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,201 Answers

It should be on front of engine, just below the top radiator hose, there is a bolt through the center of it, it has a short arm or shaft extending down with a pully on it.
On V8 type, there is a secondary belt for the air conditioning, which is easier to get at from under the truck.
That's where my manual is showing it is.

Posted on Nov 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cant get timing the pulley bolt off to change timing belt?


here is a easy way to do it . pull the starter and lock the flywheel with a screw driver that with stop the motor from turn

Dec 02, 2012 | 2001 Nissan Quest

1 Answer

Cant put serpintine belt on


You don't take anything off

You just put a long 1/2" ratchet in the hole on
the tensioner & Pull against the spring tension until
you have the belt over the final pulley

Oct 12, 2012 | 2000 Buick LeSabre

1 Answer

I cant get the crankshaft bolt off


They are sometimes installed with threadlock compound which makes it very difficult. How big and powerful was the impact wrench? Is there scope yet to hire a really huge one?

The bump method is a last resort because it puts the flywheel ring gear teeth at some risk. Break one of those and you are up for expense.
.

Apr 02, 2017 | Ford Taurus Cars & Trucks

1 Answer

How do i relese the tennison on the fan belt in my 2001 galant


Follow belt there will be a tensioner bearing with a nut on the front which will need to be loosened,then wind the bolt that goes in to back of bearing will slide bearing in and out of belt for tension.

Apr 18, 2010 | 2000 Mitsubishi Galant

1 Answer

I cant seem to get the timing right on my 93 ford probe with a 2.0l 4 cylinder manual. I just changed the timing belt and i cant seem to get it timed right with the distrebuter. any suggestions?


Mark the direction of rotation on the timing belt in case you need to re-install the original belt

00cdeeb.jpg
Cam and crankshaft sprocket alignment positions for the 2.0L engine

ac45d61.gif
Rotate the crankshaft until the timing marks (arrows) on the camshaft sprockets align with each other

8f9af2f.jpg
Please don't forget to rate

Jul 13, 2009 | 1997 Ford Probe

1 Answer

Reroute drive belt replaced alt and cant seem to find my sketch of belt configuration.


You didn't post your engine size so take your pic....hope this helps:

Drive belt routing (1.8L & 2.0L with A/C)

e28be0a.gif

Drive belt routing (2.8L)

ac1e7be.gif

Jun 29, 2009 | 2004 Volkswagen Jetta

2 Answers

Replacing the serpentine belt


Theres not an easy way, i just had to do this on my ZX2. just put a 13mm socket on the tensioner pully, pull down on it to get it to release, remove belt, and then try to place the belt all around everything but the a/c compresser, then pull back down on the tensioner and wrap the belt around the a/c compresser since its right there on the bottom where you are pulling, so you can use one hand on the tensioner and the other to put the final loop around the compressor, if this doesn't work for you, try to wrap it all but around one of the other pulleys. Mine didn't have a diagram, heres one that i made in paintbrush to help you.

795fb64.jpg

Jun 03, 2009 | 2002 Ford ZX2

1 Answer

Replacing a belt


To install a shorter belt,will require you to replace alternator bracket . The auto tensioner will not work properly .

May 14, 2009 | 1999 Dodge Ram

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...