Question about 2008 Volkswagen Rabbit

1 Answer

How do you replace the turn signal light in the mirror of a 2007 rabbit

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 13 Answers

Its tricky, you have to take the whole mirror apart in order to take the clear lens out where the light comes from. you cannot just replace the bulb. you have to replace the clear lens that comes with a built in led light.
first you pull on the mirror glass. do this very gently.. start from the top on the glass and pull very gently until the mirror comes off.. if you have a heated mirror, after you pull the glass, you will have to disconnect the wire. then you will see 3 torx screws that hold the top part on the mirror. losen those. take the top part off, then from behind you will see two more screws which you losen to remove the bottem part of the mirror. then you will see to clips that hold the led blinker in place. push on those carefully and it should come out.. you will also have to be carefull when you dissconect the wire from the led turn signal. as you might break the clip.. then replace it and follow the these step backwards..

Posted on May 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 volkswagon rabbit engine shut off will not restart not even cranking


Electrical issue obviously. Check your battery connections and battery.

Mar 04, 2014 | 2007 Volkswagen Rabbit

1 Answer

Daytime Running Lights


No, I believe those are the marker lights

Nov 06, 2013 | 2007 Volkswagen Rabbit

1 Answer

Daytime Running Lights on 07 Volkswagen Rabbit 2.5


I asked my VW friend. He said that bulb was only intended to keep the headlight area slightly lit up in the event the main light burnt out.
Some sort of safety feature.
He also said DRL's were not an option on his 2009 rabbit

Nov 06, 2013 | 2004 Volkswagen Passat

1 Answer

2007 vw rabbit yellow power steering light coming on


VW rabbit 2007 has electronic power steering so you have to send it for diagnostic testing on an ODB II tester. It is the only way you going to pick up that intermittent fault. The error code on the diagnostic tester will reveal what is causing the problem. But go check out http://volkswagen-polo-highline.blogspot.com/ to see how this gets done.

Feb 07, 2013 | 2007 Volkswagen Rabbit

1 Answer

Need to replace bulb in head light 2007 Rabbit


I would try it blindfolded, before resorting to the dealershi[p ! I'm sure any shop could do it. Bulbs are generally not expensive.

Jul 09, 2012 | 2007 Volkswagen Rabbit

1 Answer

I need to know how to replace side mirror turn signal light assembly on 2007 Veracruz


Research turned up nothing, no procedure, no illustrations, etc. The light assy appears to be only available with the whole/entire mirror assy. I suppose you could remove the outside mirror assy & attempt to take it apart to determine is the lights can be removed & replaced. No advice here from me.

Sep 01, 2011 | 2007 Hyundai Veracruz SE

1 Answer

How doI replace he tail light bulb on a 2007 volkswagen rabbit?


Go in the luggage compartment, look in the area behind the lens. There should be 3 10mm nuts. Remove them, pull the lens loose, disconnect the connector on the lens, then change the bulb.

Dec 04, 2010 | 2007 Volkswagen Rabbit

1 Answer

What are the steps to change the brke light on a 2007 VW rabbit?


pull away the carpet/fibre matting from inside the boot/trunk area to get to the lamp carrier,remove faulty lamp/replace.....

Apr 14, 2010 | 2007 Volkswagen Rabbit

1 Answer

How do I replace the turn signal light on 2008 Jetta mirror


well under neith the mirror you should see two plastic blanks pull them off and then you will find the screws undo them then pull of the cover and you will find the builb. hope this helps.....

Mar 23, 2010 | 2008 Volkswagen Rabbit

1 Answer

2007 rabbit - oil light


If it was still running okay & no noise, probably no engine damage. Adding 2 quarts should have turned off the light if the problem was oil pressure. Sounds like the oil pressure sending unit may be bad.

Apr 29, 2009 | 2007 Volkswagen Rabbit

Not finding what you are looking for?
Cars & Trucks Logo

942 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...