Question about 2005 Dodge Neon

1 Answer

We found one starter bolt but cant find the other one where are they located at

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 720 Answers

Hi,

This is the location of Starter mounting bolts, on the 2.0L engine:


we found one starter bolt but cant find the other - f89fff5.gif

Posted on Nov 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where does the upstream passenger side 02 sensor bolt in on the exhaust i found the sensor hanging from the electrical connector busted out the engine its a 1994 ford thunderbird


It should be screwed directly into the exhaust manifold. If you found it hanging, and you do not have a major exhaust leak, then I would say that your O2 sensor is broken. Look for a bung on the manifold and you will have to extract what is left of your old one.

Jun 11, 2015 | 1994 Ford Thunderbird

1 Answer

Removed two bolts from starter and cannot get starter out heard may be extra support bolts but cant locate


I had a Toyota with an odd-ball starter bolt from the back side of where the starter mounted. It didn't even look like a starter bolt, but sure enough, it was. So keep checking, you may have a third bolt you haven't found.

Aug 22, 2013 | 1997 Mitsubishi Diamante

1 Answer

Where are the bolts located that mount the starter on a 1995 audi 90


some go thru the trans bell housing into the starter nose and by all means they will be metric..also some models have a torque bar attatched to the back of it especial;ly diesel engines..

Feb 24, 2013 | Cars & Trucks

1 Answer

How to remove a starter from a 1980 honda accord


remove the positive battery terminal, then you have two bolts to remove the starter honda's are all metric so if you use a 9/16 tool you will strip the nuts,

Sep 21, 2012 | Cars & Trucks

1 Answer

Where is the starter located on a v-8 rainier


wcdodkeeuprtaaaaabjru5erkjggg==
where you can found it.
replacing it can be done under hood, by removing brake booster hose and or by under the vehicle. disconnect first cable going to starter. then need to remove the two starter bolts and starter.

Jan 27, 2012 | 2006 Buick Rainier

3 Answers

I have a 2000 focus se, 2.0; needs new starter, where is it located?


The haynes manual isnt really much help with actually locating the starter. I know because i got the haynes manual to try and find the starter on my girlfriends 2000 focus. It tells you how to change it but not where it is located. I just changed the starter so ill give you the rundown. Underneath your car right where the headers connect to the exhaust there will be a black metal plate with 4 bolts about 4 inches wide and 6 inches long. The starter is behind that barely visible. Once you remove that metal plate you can clearly see the bottom of the starter with the starter solenoid on top. There are 3 bolts on the starter but you will only see the head of one bolt from the bottom. DO NOT remove that bolt first. Go to the top of the engine and remove the air hose from the air filter box. You will see 2 bolts that connect into the right side of the starter brace. It is a very tight space but once you get the bolts off now you can go underneath the car and hold the starter while you remove the last bolt. On my 2000 focus the wires dont give you much room for it to drop. My starter only dropped about an inch so you wont have much room to work with the wires which are located on the top of the starter at the right side of the solenoid. The wires lead into a plastic harness with 2 nuts on the right side of the plastic wire harness. Good Luck.

Mar 16, 2011 | 2000 Ford Focus

2 Answers

Where is the starter located.... the starter went out on my car and i cant locate where its at


They are usually on the bottom of the front of the engine. Not exactly in the front, so go back a little bit toward the back of the engine. Your hot side battery wire leads to the starter and alternator. Find the wire that goes toward the front of the vehicle. Follow that wire and you should run into the starter.

Mar 06, 2011 | 2002 Kia Spectra

1 Answer

Where is the bolts to remove a 85 honda accord starter???


if youve found the starter motor there are 2 bolt diagnolly across from eeach other12mm from memory. if you cant find the starter look for where the gearbox meets the engine and follow the line

Jun 17, 2009 | 1985 Honda Accord

2 Answers

I need to remove my starter on my 98 Diamante but I can not see all mounting bolts and I need to know where the bolts are located.


Hi, I am assuming you know where starter is. If you have found bottom bolt #14 metric socket which to reach you "must" use a medium length extention and go into it right above manifold pipe to reach it. I found if you take the guard off the starter 3 small hex head screws, it is much easier to get at all bolts (2). Whats strange is the lower bolt on starter mounts from the front and the "TOP" bolt #14 has to be reached from the rear of starter. You can not see the top bolt from bottom or top, but if you use your hand and reach up aroung the back of starter you can feel it! It took 2 of us one reaching up from bottom with just #14 deep well socket (no extention) on the rachet and feeling where to place it with rachet facing up, and person over top of engine reaching down helping to align socket on bolt, then use a piece of pipe or ? From the top place pipe extension on end of rachet and bolt will easily.
break loose. Good Luck it sounds hard but is fairly easy with right tools. kasheyboy77

Mar 11, 2009 | 1998 Mitsubishi Diamante

2 Answers

I cant find the starter inside my car.


The bell housing of your gear box is bolted to the engine. Either at the front or rear of the engine you will find the starter motor bolted to the engine adjacent to the bell housing for your gearbox. The starter motor has to engage with the flywheel to start your car and the clutch is also bolted to the fly wheel.

Dec 02, 2008 | 1998 Mitsubishi 3000GT

Not finding what you are looking for?
2005 Dodge Neon Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...