- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
2006 Accent Brakes, Suspension & Handling Specs
Four disc brakes including two ventilated discs
Electronic brake distribution
Spacesaver steel rim internal spare wheel
Strut front suspension independent with stabilizer bar and coil springs , torsion beam rear suspension semi-independent with stabilizer bar and coil springs
hi from uk the part you mention is the brake stop light switch it has a plug on 2xwire plug it operates by as pedal is pressed the plunger of switch moves out and connects the 2xwire circuit and so brake lights operate this switch simply unscrews from the pedal box/carriage after plug removed then the new switch screwed in place and with b/pedal off the switch is screwed to a point that if you press pedal down approx 1/2 " the switch plunger moves out and b/lights come on this is trial/error untill you are happy with the pedal movement down till lights operate SIMPLE ! hope this helps?
maybe you should weigh your options cause probably cheaper to replace that rebuild disconect bat before you remove starter take all wires loose remembering where they go dont mix up and remove 2 or 3 bolts that hold the starter in place then remove and replace in reverse order
REAR BRAKE NOISE - SHOE AND LINING KIT
A shoe and lining kit is available for installation if an Elantra (XD) or Accent (LC)
equipped with rear drum brakes exhibits a chattering noise from the rear brakes when
the brakes are applied.
• Accent (LC) and Elantra (XD) equipped with rear drum brakes and in the following
Production Date and VIN Range:
For further information, refer to the applicable Shop Manual.
Model Production Date Range VIN Range
ACCENT (LC) May 21,1999 - Dec. 28, 2005 ALL WITH DRUM
ELANTRA(XD) June 30, 2000 - May 23, 2006 JOB#1-
I think the cause can be a poor grounding connection in engine that cause the (Oil,battery,door and hand brake lights all go on) and no check engine light because of the (ECU) not work good depending of no power in it because the poor ground ??
Replace the oil filter after draining the old oil, and" BEFORE "adding new fresh oil, otherwise you'll be dump all that fresh oil, on the ground,while you "TRY to get the new filter installed.
Step 1 Remove drain plug,Drain oil into drain pan
Step 2 Remove oil filter
Step 3 Reinstall drain plug,qnce oil has drained.
Step 4 Fill new filter with oil,lube seal on filter.
Step 5 Install new filter, Add fresh oil to proper level.replace filler cap
Step 6 Run engine check for leaks.