Question about Pontiac Montana SV6
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
If the 2005 Montana is similar to the 2001 Montana, I have a solution. First you'll need a hexagonal wrench (the 6-sided L-shaped wrench). The tail light assembly is held on by two screws. You'll need the hexagonal wrench to remove them, because a normal screwdriver won't do it. I also had to use a conventional adjustable wrench to get the leverage to turn the hexagonal wrench, because the screws were in there pretty tight. Once you remove the two screws, the whole tail light assembly should come off. Mine required a little force and I had to play with it a bit, but it came off without a lot of work. There will be one set of wires that connects the tail light assembly to the rest of the minivan--try not to damage that set of wires. Once you get the tail light assembly off, you'll have to take apart the assembly that actually holds the lights. No tools should be required. It's held on by four plastic catches. Just undo the catches (easier said than done, but still not too tough) and it comes apart. Then you can pop out the old light and pop in the new light. Then re-assemble. For me, it went back together much easier than it came apart.
Posted on Jan 03, 2009
For the sliding doors you need to clean the contacts, there are 6 or 8 on both sides, just wipe them clean as they are probably covered in oil/grease/grime.
Posted on Feb 14, 2009
In the Glove compartment on the left hand side there is a black snap on cover pull it from the bottom and it will come open. There is 2 filters in this spot.
Posted on Jun 28, 2009
Use a z clamp,Or us big azz pliers,Or use a hammer handle and put one of the old pad in and put the hammer handle in the and twist it will work.I hope this helps
Posted on Dec 13, 2009
I can't get mine to go into programming mode. I used these instructions, which are also posted at www.programyourremote.com - but my car never chimes.. HELP - any ideas?
Posted on Dec 23, 2009
Tips for a great answer:
Dec 08, 2017 | Pontiac Cars & Trucks
Jun 17, 2016 | 2005 Pontiac Montana SV6
Apr 26, 2015 | 2005 Pontiac Montana SV6
Nov 24, 2013 | 2005 Pontiac Montana SV6
Nov 02, 2013 | 2005 Pontiac Montana SV6
Mar 02, 2013 | 2006 Pontiac Montana SV6
Feb 01, 2013 | Pontiac Montana SV6 Cars & Trucks
May 18, 2012 | 2006 Pontiac Montana SV6
Nov 02, 2009 | 2005 Pontiac Montana SV6
310 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: