Question about 1986 Isuzu Trooper

1 Answer

Need to change rear end bearings lots of friction.

Posted by on

  • adrian halligan May 11, 2010

    you dont say what model or what year this vechial is i would need more information /what noise, why you suspect a rear bearning could it be the rear diff bearing .adrian;;

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

...and your question is.....

Posted on Jul 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear end is making a clunking noise, in gear or out of gear


location, need to find where in the rear end.
left axles, right, center
all this takes hands on work, must be try to guess and waste your time?
can be lots of things, bad U-joints.
bad axles bearings.
bad brakes (falling apart)
bad shocks, and more, lots more.......
even seen bad transfer case rear bearing....
why not get the car serviced or at the least diagnosed.
by a live human. that can find all this easy.

Jul 13, 2015 | Suzuki XL7 Cars & Trucks

1 Answer

Differential fluid low?


yes.low on fluid will damage the bearings open the cover and look for burn fluid or metal shavings. replace all seals and bearings. Torque pinion bearing to specs use new crush washer on pinion shaftDont forget friction modifier and recommend gear oil.
Good luck.

Mar 23, 2014 | Mercury Mountaineer Cars & Trucks

3 Answers

Loud thumping and whinning noise


It sounds like you have a lot of wear on your ping and pinion gears in the rear end. Ford has a product you can purchase from their parts dept that will help with the noise but eventually you will need to get the gears replaced. The product is a friction modifier designed just for rear ends.

Dec 23, 2013 | 2003 Ford Explorer

1 Answer

1995 dodge when accelerating from a stop my truck bounces


Check your rear shocks, what you are experiencing is called axle ***** and is usually caused by worn shocks.

Mar 07, 2012 | 1996 Dodge Ram 1500 Club Cab

2 Answers

I was told I need a new rear barring and axle seal how do I change it?


You have to pull the cover off the rear end and let the fluid drain. Then there is a single small bolt that holds a pin in for the spider gears. You must remove the bolt, pin and spider gears. Then take the wheel and brake drum off the side you want to change. Once thats off you can push the axle in and a clip should fall off the axle inside the carrier. Then you can pull the axle out exposing the seal and bearing you need to change. Just use a seal pulling tool to pull the old seal out and the bearing is under that. It is pressed in so it can be hard to get out. Lots of times they have to be cut out. To put the new bearing back in just use a hammer and socket that is close to the size of the outter edge of the bearing. If you put the bearing in the freezer overnight it will go in a lot easier. Then tap a new seal in and put everything back together and refill the rear end with GL5 put the posi additive in if you have a posi trac rear end. Hope this helps good luck.

Nov 20, 2010 | 1996 Jeep Grand Cherokee

1 Answer

I am changing the whole rear end on my 1999 Jeep Grand Cherokee Laredo. Replacing it with the same type I'm removing. It looks pretty simple. Is there anything I need to watch for or do?


Make sure the driveshaft is wired up.All brake lines are capped to stop air getting in.Replace the diff oil and make sure it has the friction modifier in it or that you add it to the oil.(200ml).Check for axle seal leaks.Its also a very good time to replace the universal joint at the rear.If you don't,at least relube the uni.DON,T let the needle bearing caps come apart. if the car is on a hoist,allow at least 3 hours to do the job and time it so if you do need to get some parts,the parts shops are open(bearings,seals etc.)Hope this helps

Dec 30, 2009 | 1999 Jeep Grand Cherokee

2 Answers

Increasingly loud noise coming from rear of '02 2WD 3.7L liberty


Spider gears are not difficult to replace...however, if they are worn, usually this contaminates the lube and can cause damage to carrier as well as pinion bearings...Those require precise settings with special tools and lots of experience to replace. Since you have had the noise for a long time, I can safely assume that debris has been building all that time. Spider gear set is not cheap...You may want to risk doing the job, but I would likely find another exact match, drum to drum replacement in a scrapyard. Generally I will only recommend a spider gear replacement if you have snapped a gear in half...an immediate failure
does not generate the kind of fine metal that wear does.

Apr 17, 2009 | 2003 Jeep Liberty

2 Answers

Rubbing or grinding noise coming from Driver side rear tire/wheel


I had the same problem that based on interner research is common for Fords trcuks/suvs. The common problem fro rear humming "rubbing"sound might be the rear wheel bearings/seal. These will need to be replaced as it will progressivly get worse and the noise louder and eventually the bearings can sieze. I would hesitate to take to a ford dealer if I were you as it can run $500-900. Take to mechanic that knows how to replace wheel bearings and seals. My mechanic replaced them for about $150. and the bearing and seals are around $40. A good way to test this is to raise the wheel were you can freely spin by hand...if does not spin or there is a lot of friction then it might be the wheel bearings.
Good Luck

Apr 08, 2009 | 2002 Ford Explorer

1 Answer

Whirring/whining noise from rear trans-axle


check your rear end and make sure it has plenty of gear oil..if full then there is friction in it somewhere and it is probly getting ready to go out.

Dec 02, 2008 | 2000 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14394 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...