Question about 1992 Dodge Dakota

2 Answers

MY TAIL LIGTS ONLY COME ON WHEN I TURN ON THE HAZARD SWITCH ON AND WHEN THE TAIL LIGHTS ARE ON THE BRAKE LIGHTS AND TURN SIGNALS DONT WORK

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If you have an ohmmeter make sure that all of the grounds are still connected.

The one time this happened to me it turned out to be a combination of a bad ground and a brake light with the brake and tail light filaments shorted together.

Posted on Nov 14, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,627 Answers

You need to check the ground wires to the rear lights.It is the black wire in both plugs,if you don't find the problem right away then run your own grounds.

Posted on Nov 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have tail ligts but no brake lights


fuse or bulbs. brake lights go through your turn signal switch...

Oct 20, 2014 | Cars & Trucks

1 Answer

95 mustange gt brake light dont work check #9 fuses change all bulbs replaced switch on brake pedal hazards lights works ,parking or running lights works,turning signal lights works,what other places i...


I assume the fuse has power if the hazards work.
The third brake light skips the turn signal switch, the regular brake light circuit goes thru the turn signal switch.
Do you have power going into the turn signal switch on the red lite green wire from the brake switch ?

Feb 17, 2013 | 1995 Ford Mustang

1 Answer

2000 Chevy Cavalier brake lights


Yes, if your turn signals in the back use the same filaments as the brakes, the multi-switch must allow the brake signal through when the turn signals are not activated. There are multiple diagrams for your system, so I'm not sure what you have. If you have the light blue wire that goes from the brake switch ul the column to the turn switch, make sure it is getting power when the pedal is pressed. It should go thru the switch as shown in the second diagram below.

0996b43f8024327b-zzyiglue2iivran2oy1paayi-5-0.gif

0996b43f8024bcbd-zzyiglue2iivran2oy1paayi-5-2.gif

Jun 30, 2017 | Cars & Trucks

1 Answer

Tail lights and dash lights dont work


The common power source for the tail lights and instrument cluster is the 20A TAIL LPS fuse(s) in the fuse block. BUT, in the case of the instrument cluster, there are actually two fuses with the same identification. Replacement of the fuse with the ORG wire connected should restore the tail lights when you set the turn/hazard/headlight switch to PARK and may restore the instrument cluster lamps. If not, replacement of the second fuse with the two YEL wires connected should solve the problem

Oct 26, 2012 | 1995 Pontiac Grand Am

1 Answer

Rear lights not working on 2002 suzuki grand vitara


In the underdash fuse/relay box, the 15A TAIL fuse feeds power to the coil of headlight relay 2. When the combination switch is set to TAIL, the relay closes and the outer tail lamps light. In the same underdash fuse/relay box, the 20A STOP fuse feeds power to the brake light switch. When the brake pedal is pressed, the inner brake lamps light. The underdash fuse/relay box also contains the 10A TURN BACK fuse which feeds power to the hazard switch and the turn signal relay. Relay output is fed to the combination switch and turn signal power is applied to the selected middle tail light. The fourth fuse in the underdash fuse/relay box is the 15A HAZARD fuse which feeds power to the hazard switch and turn signal relay. When the hazard switch is set, the turn lamps on both sides begin flashing.

Sep 18, 2012 | 2002 Suzuki Grand Vitara

1 Answer

Turn signal,brake lights not working


I would check for voltage at the turn signal switch. The brake lights go thru the turn signal switch, except for the high mount light.

Jul 24, 2012 | Cars & Trucks

2 Answers

2007 Jeep Grand Cherokee..tail ligts and blinkers do not work when headlights are on..they work otherwise..another problem when headlights or running lights are on and I use left blinker, it blinks...


mporteous, It sounds like you have a light switch problem. I can't think of any other reason for the running lights and tail lights not working in this situation. Are your brake lights working when the headlights are off and how about when they are on? Do your four ways hazard lights work in these situations? Try all the lights under these conditions. The reason the left turn signal blinks very fast is because one of the bulbs are burned out. Try the left signal and one light (front or back) will stay on and the other will not come on at all. Replace the bulb that does nothing. Do this before you try all the lights in different situations. I think that you will have to replace the light switch. Good luck with this.

May 19, 2011 | 2007 Jeep Grand Cherokee Overland

1 Answer

Brakes Lights dont work on a 2006 Chevy Silverado


I've worked on these the first drove me crazy. its the turn signal switch every thing runs thru these. head lights, turn signal, brakes. except the third brake light. it runs directly from the brake switch. go figuare

Jun 22, 2010 | 2003 Chevrolet Tahoe

3 Answers

No turn signals or brake lights on left and right but brake light on top


I agree. My brake light dont work. Only the third brake light does. The running lights work but when i apply the brakes the rear tails dont light up.
I currently have this issue along with the signals dont work unless I bang the top of the steering colum. The hazard switch doesnt work either. If the signals dont work it makes this very quick clicking sound on the passenger side. I checked the fuses and they are good. The bulbs still work. The brake switch works cause the third brake light goes on. And seeing as I am having a problem with signals.....GM says I have to replace the switch in the steerg colume. Its a little box about the size of a cigarette pack. If you take apart the panels off ( right behind the steering wheel, where the hazard switch is) ...that is where it is located. Its plugged into the signal lever. Hope this helpa....Good luck everyone with this issue.

Oct 17, 2008 | 2001 Chevrolet Blazer

Not finding what you are looking for?
1992 Dodge Dakota Logo

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8201 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...