Question about 2007 Honda CR-V

1 Answer

How do I RESET MY OIL GAUGE TO GO BACK TO 100%? I HAVE TURNED THE CAR TO THE ON POSITION, I THEN GET IT TO WHERE IT SAY 30%, I THEN PRESS THE BUTTON TIL IT FLASHES "cancel" i then let go, then press again for 10 seconds.. when i let go it returns back to 30% =(

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 57 Answers

  1. Turn the ignition switch to the ON (II) position.
  2. Press the Select/Reset knob repeatedly until the engine oil life is displayed.
  3. Press the Select/Reset knob for about 10 seconds. The information display shows the reset mode initial display as shown.
    1. Select the "OIL LIFE" indicator by turning the Select/Reset knob. The display begins to blink. Push the same knob to enter this setting.
    2. The engine oil life and the maintenance item code(s) will begin to blink. Push the Select/Reset knob to reset.
    3. The maintenance item code(s) will disappear, and the engine oil life will reset to "100".

Posted on Nov 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to get wrench light & oil percentage gauge to work after an oil change have reset the button does not work


HI THERE, YOU HAVE TO PUT THE KEY TO ON POSITION ,THEN PRESS RESET FOR AT LEAST 15 SEC,TILL FLASHING , RELEASE THE BUTTON ANT THEN PRESS AGAIN FOR ABOUT 20 SEC . IT WILL BE CLEAR ON SERVICE A RESTART AT 100%

Jan 16, 2011 | 2008 Honda Civic

Tip

Cadillac service light 1989-01


Eldorado

2000-01

Turn the ignition to ON. Press the TRIP button on the driver information center (DIC) switch to view various menu choices and stop on OIL LIFE REMAINING. A message will display the percentage of oil life remaining. Press and hold the RESET button on the DIC switch for at least 2 seconds. A message will display the percentage of oil life remaining as 99 percent. The engine oil life monitor is now reset. Turn the ignition OFF.


DeVille,
Eldorado


1999

To reset the service Oil Life Indicator, display the
"OIL LIFE LEFT" message by pressing the "INFORMATION SKIP" (skip info) button. Press and hold the "RESET NO" (no info reset) button until "100% OIL LIFE" is displayed.


Deville,
Seville


2000-01

Turn the ignition to ON, Press the INFO button on the driver information center (DIC) to display ENGINE OIL LIFE. Press and hold the INFO RESET button on the DIC until the display reads 100% ENGINE OIL LIFE. The engine oil life index is now reset. Turn the ignition OFF.


Deville,
Seville,
Eldorado


1997-98

Display "ENGINE OIL LIFE" by pressing the "INFO" button. Press and hold the "INFO RESET" button until the message shows 100.


All Models
except
Fleetwood


1994-97

Press the "INFORMATION" button until "OIL LIFE LEFT" is displayed. Press the "RESET" button until "100" or "0.0 OIL LIFE LEFT" is displayed.


Fleetwood


1994-96

To reset "CHANGE OIL" light, turn the ignition switch to the run position without starting the engine. Fully depress and release the accelerator pedal 3 times within 5 seconds.


All Models,
Seville,
Eldorado


1993,
1994-95,
1994-95

The automatic transaxle message can be reset through the following procedure. If "CHANGE TRANSAXLE FLUID" appears on the Information Center, press and hold the "OFF" and "REAR DEFROST" buttons until "TRANS FLUID RESET" appears.


DeVille,
Fleetwood


1991-93

When "CHANGE OIL SOON" light is illuminated, press and hold the "RESET" and "RANGE" buttons on the Fuel Data Center for 5 to 60 seconds. When the buttons are released, the light will flash four times if it has been reset. If the light comes back on for more than 5 seconds, repeat the procedure.


Allante


1989-93

When "CHANGE OIL SOON" appears on the Driver Information Center, press the "RANGE" button until "OIL LIFE INDEX" shows on display. Then press and hold "AVG SPEED" and "RESET" (or "RANGE" on late models) buttons until display shows "100".


Seville,
Eldorado


1992-93

Press "INFORMATION" button on the Driver Information Center until "OIL LIFE INDEX" is displayed. Press "STORE/RECALL" until "OIL LIFE INDEX" resets to 100.


Seville,
Eldorado


1989-91

When "CHANGE OIL SOON" or "CHANGE ENGINE OIL SOON" appears on the Driver Information Center, press "ENG-DATA" button until the "OIL LIFE INDEX" appears. Then press the "ENG-DATA" button and the "RANGE" buttons at the same time until 100 displays (about 5 seconds).





















on Dec 07, 2009 | Cadillac Eldorado Cars & Trucks

Tip

Buick service light 1991-01


LeSabre,
Park Avenue


2000-01

Turn the ignition to ON. Press the GAUGE INFO button on the driver information center (DIC) switch to view OIL LIFE INDEX. Press and hold the RESET button on the DIC until the display reads OIL LIFE INDEX 100% NORMAL. The engine oil life monitor is now reset. Turn the ignition OFF.



Park Avenue


1997-99

When "OIL LIFE INDEX CHANGE OIL" appears in the Driver Information Center, press and hold the "RESET" button while the oil life index is being displayed. After 5 seconds, the oil life will change to 100%



Le Sabre,
Park Avenue


1995-99
1995-96

When "CHANGE OIL SOON" light is illuminated, access the reset button in the glove box. With the engine off and the ignition switch in the run position, press and hold the button for at least 5 seconds. The light will flash four times and then go out.



Century,
Regal,
Roadmaster


1997-01,
1996-01,
1995-96.

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Fully depress and release the accelerator pedal three times within 5 seconds. The light will flash twice and go out.



Roadmaster


1994

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Access the reset button on the end of the instrument panel by the fuse block. Press the switch and hold it for at least 5 seconds.



Le Sabre,
Park Avenue


1992-94,
1991-94

When "CHANGE OIL SOON" light is illuminated, find the hole in the underside of the dash on the passenger side near the door. Insert a blunt instrument into the hole and press the switch. The light will flash four times when the system is reset.











on Dec 07, 2009 | Buick LeSabre Cars & Trucks

1 Answer

How do you reset the oil cgange indictor on a 2006 lincoln towncar


Here is the method for the 2004 model. I think the 2006 is the same.

Turn the ignition to the "ON" position. Press "SETUP" button. "PRESS RESET FOR SYSTEM CHECK" is displayed. Press "RESET" button.
"OIL LIFE % HOLD RESET NEW" is displayed. Press and hold "RESET" button until "IF NEW OIL HOLD RESET" is displayed. Press and hold
"RESET" button until "OIL LIFE RESET TO 100%" is displayed.

May 02, 2010 | 2006 Lincoln Town Car

2 Answers

How do you reset the oil life indicator? the instructions in the owner's manual are incorrect. thanks


on the DIC press the button until the oil life message apears then press and hold the reset until the oil life reads 100% this is all done with the key in the on not running position. hope this helps get back to me if you need more help Thanks Ray

Feb 19, 2010 | 2007 Suzuki XL-7

2 Answers

Change oil light comes on ans stays on shortly after turning the car on. Then it turns off after a minute or so. Oil was changed very recently and don't know what's up?


This light needs to be reset when the oil is changed. To reset, do the following:
1. turn key to 'run' position with engine OFF
2.fully press and release the gas pedal 3 times in 5 seconds or less
3.light should now flash, which means it is reset. Light will go off in 30 seconds, or when key is turned off.

Aug 11, 2009 | 2003 Saturn VUE

2 Answers

Reseting After Oil Change . Still Tell 0% And Oil Changed Done ????


Turn the key to the on position, press the gas pedal to the floor three times, then start the car. You must do it within 10 seconds of turning the key on though.

May 02, 2009 | Cadillac DeVille Cars & Trucks

2 Answers

I need sensors (master reset)


Open the DIS [Driver Information System] with the car running. The screen should flash all the annoying messages. Press the "Fuel" button repeatedly until the messages clear and it displays your fuel used. The press the Eng button until it shows your Oil Life, then hold down the reset button for 10 seconds. Then press Eng again till it shows your Transmission Fluid Life, and hold down the reset button for 10 seconds. As for the coolant indicator, make sure the reservoir is filled to the appropriate level. If you still get the Low Coolant message, check to make sure the coolant level sensor is plugged in (its on the reservoir) and if it is, then it may need replaced or cleaned.

Apr 24, 2009 | 1995 Oldsmobile Aurora

1 Answer

After oil change the main req sign is the last one to fade


To reset go to screen where it says the oil life percentage. Have the car off but in the on position. Press the odometer button (same button to get to the oil life screen) in and hold for a while, something like 30 sec or so until it starts flashing...Then let go and push the button again and hold and after like 5 seconds i think it will then display 100% and that's it. Hope this helps you, good luck!

Apr 09, 2009 | 2000 Honda Odyssey

4 Answers

Change oil light will not go off after my oil change


Turn car off, then turn the key to ACC, pump the gas peddle 5 times. Turn off, then start car up that wil reset it and bring it back to 100%

Jul 01, 2008 | 2007 Pontiac G6 GT Convertible

Not finding what you are looking for?
2007 Honda CR-V Logo

476 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...