Question about 2004 Volkswagen Passat

2 Answers

Horn does not blow.I checked the fuse and changed the relay

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check for power on the wire connected to the horn ,u need to read 12 vcc,if you have voltage the horn is gone ,if you don`t the problem is before the fuse .good luck

Posted on Nov 14, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Get 2 cables and put direct current from the battery...if it doesnt work..change the horn...

Posted on Nov 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have a 1998 chrysler concorde. The airbag light on the dash stays on and my horn doesnt work. How do i fix this without costing me tons of money?


Could be a wiring problem or the clockspring in the steering column.
You would need to pull the steering wheel and test the circuits.

Mar 26, 2015 | Chrysler Cars & Trucks

1 Answer

Horn doesn't blow. i have changed the fuse. it only blows with remote key lock


Should be clear that the problem is in the steering column horn mechanism, but to fix it you will need to remove the air bag.. Are you competent to do that safely?

Jan 28, 2015 | 2004 Chrysler Pacifica

1 Answer

Replaced horn fuse still not working in 2004 pacifica


does it work with the key fob but not with the switch then check the horn pad switch if doesn't work with either check the relay

Oct 07, 2012 | 2004 Chrysler Pacifica

1 Answer

Horn no blow


check for blowed fuse or bad relay, you can hook test light to see if horn getting power when you press horn pad if fuse and relay okay,remove horn and hot wire it if it blows, more likely horn pad with airbag in steering wheel bad,if horn pad bad you have to replace whole airbag with with horn pad as a unit.if horn dont blow when hot wired then horn it self is bad.

Sep 17, 2012 | 2000 Honda Odyssey

1 Answer

HORN ON 2003 PONTIAC GRAND AM BLOWS CONTIOUSLY


horn switch is stuck on, or the wires are touching

Sep 11, 2012 | 2003 Pontiac Grand Am

1 Answer

For 2004 ford truck f150 extended cab, I found the horn fuse, where is the horn relay?


disconnect the horn or horns, operate the horn and see if the fuse still blows. if the fuse still blows then there is most likely a short in the wiring. relays rarely cause shorts. if the fuse doesnt blow with the horn disconnected, reconnect the horn and operate the horn again, if the fuse blows you have a shorted horn.

Jul 14, 2012 | 2004 Ford F150

1 Answer

I am using hyundai coupe 1998 model. since yesterday horn is not working. workshop peoples asking me to change airbag. please advise


Open the hood. Find the horn. Put one hand on the horn.
Have someone else blow the horn. If you DO NOT feel a click or hum then no power is getting to the horn. Get the owners manual out and find the fuse for the horn. Check or replace that fuse. See if the horn works. If not working go to auto parts store and ask them to look up horn relay for your car. Ask them to show you where the relay is located. See if you can replace that relay yourself. good luck

Jul 11, 2012 | Cars & Trucks

2 Answers

2006 grand prix horn fuse keeps blowing. what should i look for


horn may be shorted internally. Try pulling the connector off the horn, put in a fresh fuse, see if it blows.

If it still blows, you have a short in the wiring or the relay. If there is no obvious short in the wiring, change the relay.

If the fuse doesn't blow with the horn disconnected, replace the horn.

Sep 11, 2010 | 2006 Pontiac Grand Prix

2 Answers

99 dodge durango. My horn keeps blowing the 20 amp fuse under hood. There is also a horn relay. Could that be the problem? The horn will work after I replace the 20 amp, but blows within a few times of...


could be you might check it out. many items take the same relay so you might try exchanging it with another one with the same numbers. If that isn't it you may have a short in the horn itself.

Aug 11, 2010 | 1999 Dodge Durango

1 Answer

Horn won't stop blowing


If you can locate and pull relay, do that, if not, pull wires off at horn if you can, otherwise pull fuse. If you have other relays same in area of horn relay (same number on relay) try one of them in that horn spot to see if maybe it's just a stuck relay.If you pull fuse for horn, you may find out something else on same fuse, so make sure you check everything else is working.

Mar 17, 2009 | 2008 Dodge Avenger

Not finding what you are looking for?
2004 Volkswagen Passat Logo

Related Topics:

359 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...