Question about 2003 Chevrolet Tahoe

2 Answers

The control to move the drivers seat quit working. is there a fuse or switch that went out?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 101 Answers

In 2003 this problem was really common and general motors never came up with a proper fix to the best of my knowledge there is however a temporary fix that can make it work for an indefinite amount of time. remove the battery from the vehicle, set the battery on the ground and then take the two wires that used to be attatched to the battery and touch them together for a bout ten seconds. DO NOT DO THIS IF YOU HAVE AND AFTERMARKET CAPACITOR FOR A BIG STEREO SYSTEM , you should see a little spark for just a split second then just hook the battery back up, this also works for dead factory radios around that year and dead door modules. your just reseting the memory in the seats computer

Posted on Nov 24, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 120 Answers

Yeah probably just check the fuse box...should all be labelled..if not then check the owners manual for further information on this...if not, then take to your mechanic..

Posted on Nov 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Electric driver seat not working. And mirror's. In insignia


CHECK FUSES..... MAKE SURE VOLTAGE IS GETTING TO THE MOTORS AND SWITCHES FOR THE SEAT...IF SO.... YOUR SEAT MOTOR MAY BE OUT... AND THE MIRROR MAY BE ON THE SAME CIRCUIT. IF ONE QUITS THEY BOTH QUIT. WHICH IS OBTUSE, BECAUSE THEY SHOULD HAVE BEEN WIRED IN PARALLEL AND NOT SERIES.

Jan 06, 2015 | Cars & Trucks

2 Answers

Can't get the drivers seat to move, could it be a fuse and where would that fuse be located?


Fuses are located on the drivers door jamb and in the engine compartment. See your manual. If the passenger seat is power and it works, then your problem is not a fuse but a switch.

Mar 21, 2014 | Oldsmobile Aurora Cars & Trucks

1 Answer

My 2003 gmc Sierra driver side door panel quit working, locks quit, seat heater quit, windows quit, passenger side works fine


The most likely culprit is your driver's door control module... it's built into the driver's window switches. Double-check all your fuses before replacing any parts.

Jan 27, 2013 | 2003 GMC Sierra 1500

3 Answers

1995 jaguar driver seat won't move.


You might want to try disconnecting the negative battery cable for 5 minutes and then reconnecting it. This procedure fixed my seat that was not working. It works fine now. I know it sounds too good to be true but it usually works

Jan 23, 2010 | 1995 Jaguar XJ6

2 Answers

Power seat problems driver side will not move


Seat motor,connector,wiring,fuse and position switch are the only item in the picture here,

I will start with checking the motor connector (NOT AIR BAG) first.

Fuse second and work you way to the switch,

If you are handy you can apply 12V power to the seat and see does it move.

A dirty seat track rail can also cause the fuse to blow,

Jul 17, 2009 | 2000 Lincoln LS

3 Answers

Pwoer seat quit working


Could be your fuse too. Middle row of passenger side fuse box fourth from the right

May 04, 2009 | 1997 Land Rover Discovery

7 Answers

BMW X5- power wheel, power seats


I have the same problem. Seat and steering column just stopped working. Passenger side normal. No fuse for these components. With so many postings witht he same problem there has to be a defective or worn out source. Please post if you find a solution!

Feb 11, 2009 | 2002 BMW 5 Series

1 Answer

ACTIVATING DRIVERS " SEAT HEATER" SWITCH BLOWS FUSE


This would Definately be a Short And, Yes you Can just replace the Pad. Could just be that the Wiring is in a Bind and needs to be Moved around. Seeing that it only has 5000 K on it, It should still be Under the Factory Warranty and they should repair this Free of Charge.

Jan 02, 2009 | Hyundai Veracruz Cars & Trucks

1 Answer

Power seat, driver side


If only one seat is not working the fuse/relay is ok or both would not work, most likely cause based on experience is the control switch, then the power seat motor.

Sep 12, 2008 | 1994 Buick LeSabre

Not finding what you are looking for?
2003 Chevrolet Tahoe Logo

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...