Question about 2005 Ford F 350 Super Duty

1 Answer

2002F350 ALL THE GAGES STOPPED WORKING GOES IN GEAR WILL NOT EXCELLERAT HEAD LIGHTS ON TIMER SIDE DONT WORK ALL STOPPED WORKING AT THE SAME TIME START TRUCK HAVE TO TURN KEY TO RUN POSITION BY HAND

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Fords are known for wiering problems check the grounds in dash and under hood

Posted on Nov 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My dashboard lights dont work


Have someone check fuse under dashboard. Some dashboards have lights wired in series. If one light goes out, they all go out.

Feb 18, 2014 | 1997 Ford Escort

1 Answer

Voltmeter gage


if it goes right off its fine but if it stays on watch the gauges see if there is a light on you norm dont see

Sep 18, 2013 | Jeep Cars & Trucks

1 Answer

Mazda 6 2005 u0101,u0155,u0121,u0073,u0100 codes coming up


I got the same problem. u ever figure it out? ive cleared codes and there the same. light on cluster lit up . plus some time after pulln away from stop car goes five mph. turn off start up drives fine. im about to burn this thing.

Apr 21, 2013 | 2005 Mazda 6

1 Answer

I have 2008 Malibu 4 cylinder and my engine light comes on, my temperature gage at times doesn't work and when it isn't working the fan keeps running and the engine light goes off at times, th


You need to find out the fault code that is stored that is causing the check engine light, the whole thing may be related to one failed part like the temperature sensor or the wiring to it.

May 17, 2012 | 2008 Chevrolet Malibu

1 Answer

Driver side blinker goes double time when headlights are on and all the bulbs in the rear flash at a different time. When the brake pedal is pressed driver side brake light goes out and both reverse l


You have a broken Ground wire From Body to Frame . You Should Have a Heavy Braided Ground wire From Engine Block to Frame on Pass side, Then You will have another one that goes from firewall to engine , like at the back of the Head on passenger side to a screw to firewall.,....One of these is Broken,Loose, Corroded.

Feb 29, 2012 | 1998 Chevrolet K2500

2 Answers

The light of check gages turned on for a 1999 tahoe and dont know what does it mean exactly


I have a 1998 chevrolet k1500 check gauge light keeps comming on and off then the tack ans speedo dose not work and truck pulls out in 3rd gear

Mar 02, 2010 | Chevrolet Tahoe Cars & Trucks

1 Answer

Gages


Yoyu dont mention the mileage on your Yukon but low oil pressure will indeed light the CES light when it reachs o psi. Have you checked your oil? Have you changed your oil and filter. High mileage and poorly maintained motors will eventually wear out and develope low oil pressure. A tempary cure would be to use a higher weight oil 20w50 will get a few more miles out of the old gal if indeed the cam, main or rod bearings have reached their service limit.. Good luck

Jun 24, 2009 | 1999 GMC Yukon

1 Answer

The gage cluster


Had the same problem on my wife's 1999 Cherokee.  I had to take the entire left side of the dash off to get the instrument cluster out.  You need to unplug it and clean the plug and the instrument cluster itself off and then put everything back together.  Worked for me and haven't had a problems since.  One note: the headlight switch has to be taken off and it's kinda hard.  You have to get up underneath it and  there is a clip that has to be pinched in order for you to pull the switch off.  Hope this helps because I know what a pain it is!

Apr 24, 2009 | 1998 Jeep Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...