Question about 2001 Jeep Grand Cherokee

1 Answer

I need the number of quarts of automatic transmission fluid needed for a fluid and filter change

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 5,763 Answers

It holds 5 qts, also it uses a certain type of fluid, if it has a 4.0 L it uses puls 3 type fluid, if it has the 4.7 engine then it uses plus 4 type trany fluid, it does it matter on the amount , both engines use the same amount of trany fluid which again is 5 qts, hope this helps and good luck.

Posted on Nov 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need recommended Fluid specs and amounts to change oil for 1996 Toyota Tacoma 4 wheel drive front and rear axles


Hello there,

From this page https://www.worldsbestoil.ca/product-cross-reference.php?year=1996&make=TOYOTA&model=TACOMA&engine=2.7L&vin=1



Extract.......

.Engine, 2WD, with filter - 5.4 quarts [1]

Engine, 4WD, with filter - 5.3 quarts [1]

Cooling System, Initial Fill - 9 quarts

AMSOIL Antifreeze and Engine Coolant

Automatic Transmission, A340E Initial Fill - 1.7 quarts

Automatic Transmission, A340F Initial Fill - 2.2 quarts

Automatic Transmission, A43D Initial Fill - 2.6 quarts

Automatic Transmission, Total Fill

4 speed A340F - 10.4 quarts

4 speed A340E - 7.7 quarts

4 speed A43D - 6.9 quarts

Manual Transmission, - 5.3 pints

Differential, With ADRD Front - 2.6 pints

Differential, Without ADRD Front - 2.4 pints

Differential, 2WD Without LSD Rear - 6 pints

Differential, 4WD Extra Long Rear - 4.5 pints

Differential, With LSD Rear - 6.4 pints

Differential, Standard Rear - 6 pints

Transfer Case, - 2.2 pints\'

Sep 13, 2014 | 1996 Toyota Tacoma

1 Answer

How many qts of oil do i need


Depends on your engine.

1980 JEEP CJ-7 2.5L 4-cyl Engine Code [B]
CAPACITIES
Engine, GM without filter..........2.4 quarts[1]
Wix Filter ........ 51040
Cooling System, Initial Fill..........8.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....25 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 4.2L 6-cyl Engine Code [C]
CAPACITIES
Engine, without filter..........5.0 quarts[1]
Wix Filter..... 51522
Cooling System, Initial Fill..........11.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....30 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 5.0L 8-cyl Engine Code [H]
CAPACITIES

Engine, without filter..........4.0 quarts[1]
Wix Filter..... 51258
Cooling System, Initial Fill..........13.0 quarts
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A904, 30RH..........7.0 quarts
3 speed A999, 32RH..........8.4 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

Oilman

Feb 02, 2013 | 1984 Jeep CJ7

1 Answer

How much transmission fluid does it take when changing the transmisssion screen and filter?


When the pan is dropped and fluid is drained, to refill, it usually needs 5 - 6 quarts. When refilling, check the transmission fluid dipstick as you are adding the last two quarts. And also run the transmission thru the gears.

Oct 20, 2012 | 2003 GMC Envoy

1 Answer

I have a gmc Yukon Denali xl and needed to know how many quarts of ATF transmission oil do I need to flush my trans


if the transmission fluid is brown or it hasn't been changed then I would flush it
spacer.gif
Here is what I have listed, more than likely you have the 4L60E which is 5qts.
CAPACITIES
Engine, with filter..........6.0 quarts[1]
Cooling System, Initial Fill..........17.0 quarts
AMSOIL Antifreeze and Engine Coolant
Cooling System, W/ Rear Heat Initial Fill..........19.0 quarts
AMSOIL Antifreeze and Engine Coolant
Automatic Transmission, 4L80E Initial Fill..........7.7 quarts[2]
Automatic Transmission, 4L85E Initial Fill..........7.7 quarts[2]
Automatic Transmission, 4L60E Initial Fill..........5.0 quarts[2]
Automatic Transmission, Total Fill
4 speed 4L60E..........11.0 quarts
4 speed 4L80E..........14.0 quarts

Dexron VI is the way to go. As for a filter the choice is yours..Hope this helps Tim

May 22, 2011 | 2005 GMC Yukon Denali

2 Answers

I need to know how many qts of transmission fluid goes in a 1998 ford windstar?


Application: With automatic transmission
AX4S transmissionTotal refill - 12.3 quarts.

May 10, 2011 | Ford Windstar Cars & Trucks

1 Answer

Transmission filter rplacement how much fluid?


Automatic Transmission, 46RH Initial Fill..........4.1 quarts
Automatic Transmission, 44RE Initial Fill..........4.1 quarts
Automatic Transmission, 42RE Initial Fill..........4.1 quarts
Automatic Transmission, Total Fill
4 speed 44RE..........11 quarts
4 speed 46RH..........14.4 quarts
4 speed 42RE..........11 quarts

Jan 29, 2011 | 1995 Jeep Grand Cherokee

1 Answer

How many quarts of transmission fluid goes in a 2000 ford explorer /


Hello there
abar_a.gif?v=72006
2000 FORD TRUCKS EXPLORER 5.0L 8-cyl Engine Code P

FILTERS
AMSOIL Ea Oil Filter.........EAO11
Wix Oil Filter.........51372
AMSOIL Ea Air Filter.........EAA122
Wix Air Filter.........46253
Wix Fuel Filter.......33595
Wix Trans Filter.....58955 [1]

[1] 4R70W

CAPACITIES
Engine, with filter..........5.0 quarts[1]
Cooling System, Initial Fill..........15.0 quarts
Automatic Transmission, Others Initial Fill..........3.9 quarts[2]
Automatic Transmission, 4R70W Initial Fill..........5.0 quarts[2]
Automatic Transmission, Total Fill
4R70W..........14.0 quarts
2wd ..........10.0 quarts
4wd ..........10.0 quarts
Manual Transmission, ..........5.5 pints
Differential, Rear..........5.7 pints[3]
Differential, Dana 35 Front..........3.6 pints[4]
Transfer Case,Full-Time 4WD..........2.7 pints

1. When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase.
2. With ENG at operating temperature, shift through all gears. Check fluid level in PARK and add fluid as needed.
3. Fill to no more than 1/4 to 9/16" below fill plug hole.
4. Fill no higher than 9.5 mm or 3/8" below fill plug.


Aug 07, 2010 | 2006 Ford Explorer

2 Answers

What is the automatic transmission fluid capacity for a 1988 dodge ramcharger 4wd 5.2L engine


To find the correct specification, we need additional information about your 1988 Dodge Truck Ramcharger 4WD 5.2L FI 8cyl:

A999/32RH Transmission model
Transmission Fluid Capacity 4 Quarts
Application:
Fluid and filter change

Transmission Fluid Type 06810

Application:
With automatic transmission
Note :
Castrol ATF +4 ATF


Transmission model A727 or 36RH
4 Quarts
Application:
Fluid and filter change
With lock up

Transmission Fluid Type 29201

Application:
With automatic transmission
Note :
Coastal(R)+4(R)ATF

06810
Application:
With automatic transmission
Note :
Castrol ATF +4 ATF

VV346
Application:
With automatic transmission
Note :
Valvoline ATF+4 Full Synthetic ATF


Lubrication chart for 1985-88 100, 200, 300 4WD

143b247.jpg

Hope helped (remember rated this post).

Feb 25, 2010 | 1988 Dodge Ramcharger

1 Answer

Transmission fluid capacity for 2000 Kia Sephia?


The four speed automatic shows a total fill (that is all the fluid it can hold) is 5.7 Quarts. So if you just dropped the pan and relplaced the filter, you shouldnt need more than 4 quarts and likely you would have a little extra with that.

Dec 29, 2008 | 1999 Kia Sephia

1 Answer

Transmission fluid


Transmission
fluid
Motorcraft SAE
75W-90 gear oil
(non-synthetic)
Manual transaxle 3.0 quarts
(2.87L)3
Motorcraft FNR5
Automatic
Transmission
Fluid
5–speed
automatic
transaxle
7 quarts (6.7L)4
Premium
Automatic
Transmission
Fluid
6–speed
automatic
transaxle
7.4 quarts
(7.0L

Oct 26, 2008 | 2006 Ford Fusion

Not finding what you are looking for?
2001 Jeep Grand Cherokee Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...